A novel method for surface temperature measurement using temperature sensitive paint (TSP) is presented. Precalibration of the TSP is shown and a semi in situ calibration technique using thermocouples is provided for high accuracy measurement. The method presented is applied to a film cooling experiment with a maximum surface temperature of 430 K and compared to highly reliable infrared thermography measurements that serve as benchmark results. The in situ calibration technique shows a maximum deviation of 0.5 K from the thermocouple readings. The comparison of laterally averaged temperature distributions of TSP and infrared measurement shows excellent agreement.
Issue Section:
Research Papers
References
1.
Goldstein
, R. J.
, Eckert
, E. R. G.
, Eriksen
, V. L.
, and Ramsey
, J.W.
, 1970
, “Film Cooling Following Injection Through Inclined Circular Tubes
,” Israel J. Technol.
, 8
, pp. 145
–154
.2.
Martiny
, M.
, Schulz
, A.
, Wittig
, S.
, and Dilzer
, M.
, 1997
, “Influence of a Mixing-Jet on Film Cooling
,” ASME Paper No. 97-GT-247.3.
Saumweber
, C.
, and Schulz
, A.
, 2004
, “Interaction of Film Cooling Rows: Effect of Hole Geometry and Row Spacing on the Cooling Performance Downstream of the Second Row of Holes
,” ASME J. Turbomach
, 126
, pp. 237
–246
.10.1115/1.17313954.
Saumweber
, C.
, and Schulz
, A.
, 2008
, “Effect of Geometry Variations on the Cooling Performance of Fan-Shaped Cooling Holes
,” ASME
Paper No. GT2008-51038.10.1115/GT2008-510385.
Baldauf
, S.
, Schulz
, A.
, and Wittig
, S.
, 2001
, “High Resolution Measurements of Local Heat Transfer Coefficients by Discrete Hole Film Cooling
,” ASME J. Turbomach.
, 123
, pp. 749
–755
.10.1115/1.13872456.
Baldauf
, S.
, Schulz
, A.
, and Wittig
, S.
, 2001
, “High Resolution Measurements of Local Effectiveness by Discrete Hole Film Cooling
,” ASME J. Turbomach.
, 123
, pp. 758
–765
.10.1115/1.13717787.
Gritsch
, M.
, Schulz
, A.
, and Wittig
, S.
, 2000
, “Film-Cooling Holes With Expanded Exits: Near-Hole Heat Transfer Coefficients
,” Int. J. Heat Fluid Fl.
, 21
, pp. 146
–155
.10.1088/0957-0233/20/7/0751038.
Gritsch
, M.
, Colban
, W.
, Schär
, H.
, and Döbbeling
, K.
, 2005
, “Effect of Hole Geometry on the Thermal Performance of Fan-Shaped Film Cooling Holes
,” ASME J. Turbomach.
127
, 718
–725
.10.1115/1.20193159.
Schiele
, R.
, Kaufmann
, F.
, Schulz
, A.
, and Wittig
, S.
, 1999
, “Calculating Turbulent and Transitional Boundary-Layers With Two-Layer Models of Turbulence
,” Engineering Turbulence Modelling and Experiments 4
, Proceedings of the 4th International Symposium on Engineering Turbulence Modelling and Measurements, Ajaccio, Corsica, France, May 24–26, Elsevier Science Ltd., Oxford, UK, pp. 543–554.10.
Martiny
, M.
, Schulz
, A.
, and Wittig
, S.
, 1997
, “Mathematical Model Describing the Coupled Heat Transfer in Effusion Cooled Combustor Walls
,” ASME Paper No. 97-GT-329.11.
Walters
, D. K.
, and Leylek
, J. H.
, 2000
, “A Detailed Analysis of Film-Cooling Physics: Part I—Streamwise Injection With Cylindrical Holes
,” ASME J. Turbomach.
, 122
, pp. 102
–112
.10.1115/1.55543312.
Martini
, P.
, Schulz
, A.
, Bauer
, H.-J.
, and Whitney
, C. F.
, 2006
, “Detached Eddy Simulation of Film Cooling Performance on the Trailing Edge Cut-Back of Gas Turbine Airfoils
,” ASME J. Turbomach.
, 128
, pp. 292
–299
.10.1115/1.213773913.
Martiny
, M.
, Schiele
, R.
, Gritsch
, M.
, Schulz
A.
, and Wittig
S.
, 1996
, “In Situ Calibration for Quantitative Infrared Thermography
,” Quantitative InfraRed Thermography, QIRT 96, Proceedings of Eurotherm Seminar No. 50
, Stuttgart, Germany
, September 2–5.14.
Ochs
, M.
, Horbach
, T.
, Schulz
, A.
, Koch
, R.
, and Bauer
, H.-J.
, 2009
, “A Novel Calibration Method for an Infrared Thermography System Applied to Heat Transfer Experiments
,” Meas. Sci. Technol.
, 20
, p. 075103
.10.1088/0957-0233/20/7/07510315.
Ochs
, M.
, Schulz
, A.
, and Bauer
, H.-J.
, 2010
, “High Dynamic Range Infrared Thermography by Pixelwise Radiometric Self Calibration
,” Infrared Phys. Techn.
, 53
, pp. 112
–119
.10.1016/j.infrared.2009.10.00216.
Wittig
, S.
, Schulz
, A.
, and Bauer
, H.-J.
, 1985
, “Effects of Wakes on the Heat Transfer in Gas Turbine Cascades
,” Proceedings of the Propulsion and Energetics Panel 65th Symposium, Bergen, Norway, May 6–10, 1985, Paper No. AGARD-CP-390.17.
Dullenkopf
, K.
, Schulz
, A.
, and Wittig
, S.
, 1991
, “The Effect of Incident Wake Conditions on the Mean Heat Transfer of an Airfoil
,” ASME J. Turbomach.
, 113
, pp. 412
–418
.10.1115/1.292789018.
Schiele
, R.
, Sieger
, K.
, Wittig
, S.
, and Schulz
, A.
, 1995
, “Heat Transfer Investigations on a High Loaded, Aerothermally Designed Turbine Cascade
,” 12th Int. Symposium on Air Breathing Engines
, Melbourne, Australia
, September 10–15, American Institute of Aeronautics and Astronautics, Reston, VA, pp. 1091–1101.19.
Lorenz
, M.
, Stripf
, M.
, Schulz
, A.
, and Bauer
, H.-J.
, 2008
, “External Heat Transfer Measurements on a Turbine Airfoil in a Linear Cascade
,” Proceedings of the 19th International Symposium on Transport Phenomena
, Reykjavik
, Iceland, August 17–20.20.
Ireland
, P.T.
, and Jones
, T.V.
, 2000
, “Liquid Crystal Measurements of Heat Transfer and Surface Shear Stress
,” Meas. Sci. Technol.
, 11
, pp. 969
–986
.10.1088/0957-0233/11/7/31321.
Kissel
, T.
, Brübach
, J.
, Baum
, E.
, and Dreizler
, A.
, 2009
, “Two-Dimensional Thermographic Phosphor Thermometry Using a CMOS High Speed Camera System
,” J. Appl. Phys. B
, 96
(4
), pp. 731
–734
.10.1007/s00340-009-3626-522.
Heyes
, A. L.
, Seefeldt
, S.
, and Feist
, J.P.
, 2005
, “Two-Colour Phosphor Thermometry for Surface Temperature Measurement
,” Opt. Laser Technol.
, 38
, pp. 257
–265
.10.1016/j.optlastec.2005.06.01223.
Stripf
, M.
, Schulz
, A.
, and Wittig
, S.
, 2005
, “Surface Roughness Effects on External Heat Transfer of a HP Turbine Vane
,” ASME J. Turbomach.
, 127
, pp. 200
–208
.10.1115/1.181110124.
Stripf
, M.
, Schulz
, A.
, and Bauer
, H.-J.
, 2007
, “Roughness and Secondary Flow Effects on Turbine Vane External Heat Transfer
,” J. Propul. Power
, 23
(2
), pp. 283
–291
.10.2514/1.2306225.
Lorenz
, M.
, Schulz
, A.
, and Bauer
, H.-J.
, 2010
, “An Experimental Study of Airfoil and Endwall Heat Transfer on a Linear Turbine Blade Cascade—Secondary Flow and Surface Roughness Effects
, Heat Transf. Res.
, 41
, pp. 867
–887
.10.1615/HeatTransRes.v41.i8.6026.
Lorenz
, M.
, Schulz
, A.
, and Bauer
, H.-J.
, 2012
, “Experimental Study of Surface Roughness Effects on a Turbine Airfoil in a Linear Cascade—Part I: External Heat Transfer
,” ASME J. Turbomach.
, 134
(4
), p. 041006
.10.1115/1.400323427.
Liu
, T.
, and Sullivan
, J. P.
, 2005
, Pressure and Temperature Sensitive Paints
, Springer, Berlin
.28.
Liu
, Q.
, Kapat
, J. S.
, Douglass
, C. J.
, and Qiu
, J.
, 2003
, “Applicability of Temperature Sensitive Paints for Measurement of Surface Temperature Distribution
,” ASME
Paper No. GT2003-38591.10.1115/GT2003-3859129.
Stöcker
, H.
, 2000
, Taschenbuch der Physik
, Verlag Harri Deutsch, Frankfurt am Main, Germany
.30.
Förster
, T.
, 1951
, Fluoreszenz organischer Verbindungen
, Vandenhoeck & Ruprecht, Göttingen, Germany
.31.
Becker
, R. S.
, 1969
, Theory and Interpretation of Fluorescence and Phosphorescence
, John Wiley & Sons Inc., New York
.32.
Drexhage
, K.H.
, 1973
, Dye Lasers
, F. P. Schäfer, ed., Springer, Berlin, Germany.33.
Menzel
, R.
, and Thiel
, E.
, 1998
, “Intersystem Crossing Rate Constants of Rhodamine Dyes: Influence of the Amino-Group Substitution
,” Chem. Phys. Lett.
, 291
, pp. 237
–243
.10.1016/S0009-2614(98)00566-134.
Du
, H.
, Ru
, L.
, Junzhong
, C.
, Andrew
, L.
, and Lindsey
, J.S.
, 1998
, “Photochem-CAD: A Computer-Aided Design and Research Tool in Photochemistry
,” Photochem. Photobiol.
, 68
, pp. 141
–142
.10.1111/j.1751-1097.1998.tb02480.x35.
Fujii
, T.
, Ishii
, A.
, and Anpo
, M.
, 1990
, “Absorption and Fluorescence Spectra of Rhodamine B Molecules Encapsulated in Silica Gel Networks and Their Thermal Stability
,” J. Photoch. Photobio. A
, 54
, pp. 231
–237
.10.1016/1010-6030(90)85036-V36.
Romano
, V.
, Zweig
, A. D.
, Frenz
, M.
, and Weber
, H.P.
, 1989
, “Time-Resolved Thermal Microscopy With Fluorescent Films
,” Applied Physics B
, 49
, pp. 527
–533
.10.1007/BF0032495237.
Ehrismann
, B.
, 2009
, “Aufbau und Erprobung eines Systems zur Messung von Oberflächentemperaturen mittels thermosensitiver Beschichtungen
,” Diplomarbeit
, Institut für Thermische Strömungsmaschinen
, Universität Karlsruhe (TH)
.38.
Horbach
, T.
, Schulz
, A.
, and Bauer
, H.-J.
, 2011
, “Trailing Edge Film Cooling of Gas Turbine Airfoils—External Cooling Performance of Various Internal Pin Fin Configurations
,” ASME J. Turbomach.
, 133
(4
), p. 041006
.10.1115/1.400296439.
Horbach
, T.
, Schulz
, A.
, and Bauer
, H.-J.
, 2009
, “Trailing Edge Film Cooling of Gas Turbine Airfoils—Effects of Ejection Lip Geometry on Film Cooling Effectiveness and Heat Transfer
,” J. Heat Transf. Res.
, 8
, pp. 849
–865
.10.1615/HeatTransRes.v41.i8.40.
Martini
, P.
, Schulz
, A.
, Bauer
, H.
, Whitney
, C. F.
, and Lutum
, E.
, 2003
, “Experimental and Numerical Investigation of Trailing Edge Film Cooling Downstream of a Slot With Internal Rib Arrays
,” Proc. Inst. Mech. Eng., Part A: J. Power and Energy
, 217
, pp. 393
–401
.10.1115/1.164553141.
Martini
, P.
, Schulz
, A.
, and Bauer
, H.-J.
, 2006
, “Film Cooling Effectiveness and Heat Transfer on the Trailing Edge Cut-Back of Gas Turbine Airfoils With Various Internal Cooling Designs
,” ASME J. Turbomach.
, 128
, pp. 196
–205
.10.1115/1.2103094Copyright © 2013 by ASME
You do not currently have access to this content.