Self-adaptive stability control with discrete tip air injection and online detection of prestall inception is experimentally studied in a low-speed axial flow compressor. The control strategy is to sense the cross-correlation coefficient of the wall static pressure patterns and to feed back the signal to an annular array of eight separately proportional injecting valves. The real-time detecting algorithm based on cross-correlation theory is proposed and experimentally conducted using the axisymmetric arrangement of time-resolved sensors. Subsequently, the sensitivity of the cross-correlation coefficient to the discrete tip air injection is investigated. Thus, the control law is formed on the basis of the cross-correlation as a function of the injected momentum ratios. The steady injection and the on–off pulsating injection are simultaneously selected for comparison. Results show that the proposed self-adaptive stability control using digital signal processing (DSP) controller can save energy when the compressor is stable. This control also provides protection when needed. With nearly the same stall margin improvement (SMI) as the steady injection (maximum SMI is 44.2%), the energy of the injected air is roughly a quarter of the steady injection. Unlike the on–off pulsating jet, the new actuating scheme can reduce the unsteady force impinging onto the compressor blades caused by the pulsating jets in addition to achieve the much larger stability range extension.
Self-Adaptive Stability-Enhancing Technology With Tip Air Injection in an Axial Flow Compressor
Manuscript received January 14, 2016; final manuscript received August 22, 2016; published online September 20, 2016. Assoc. Editor: Nicole L. Key.
- Views Icon Views
- Share Icon Share
- Search Site
Li, J. (September 20, 2016). "Self-Adaptive Stability-Enhancing Technology With Tip Air Injection in an Axial Flow Compressor." ASME. J. Turbomach. January 2017; 139(1): 011008. https://doi.org/10.1115/1.4034553
Download citation file: