Implementation of the Elrod Algorithm in Practical Design of an Axial Lubricant Supply Groove in Journal Bearings

The Elrod algorithm was implemented to study the effects of axial lubricant supply groove parameters, i.e., groove length, width, and location, on the performance of a one-axial groove journal bearing, taking into consideration thermal effects. The results and presented recommendations will assist bearing designers in determining the groove’s preferred angular location and main dimensions to achieve a solution in terms of low total power loss and high minimum film thickness. It is suggested that with regard to low total power loss and high minimum film thickness, for a lighter loaded bearing, the axial groove should be located in the angular range of 100–140 deg to the load line with a groove length ratio L_g/L over 0.6 or the angular range of 300–350 deg with an L_g/L over 0.75. For a heavier loaded bearing, it is suggested that the groove be placed at the angular range of 80–115 deg with an L_g/L over 0.6.