The primary focus of this book is the application of tribology to the design and analysis of bearings and related mechanical components. In order to make the book more useful to a wide audience, the authors attempted to maintain a balance between theory and practical application. In the view of this reviewer, they were quite successful in meeting that goal.

The orientation of the book is clear from the amount of space and coverage allocated to different topics in tribology. The first part of the book, which consists of four chapters and about 100 pages, presents an introduction to the field of tribology. The second part, about 275 pages in length, contains eight chapters dealing with fluid film bearings. The final part covers rolling element bearings in three chapters and about 100 pages. Therefore, the title of the book is quite accurate; it focuses on bearing design and lubrication, and it covers that topic well.

In the introductory chapter, there is a broad introduction to tribology and to bearing selection. Lubricants and their physical properties are the topic of chapter 2, with particular emphasis on liquid lubricants and their properties and on means of oil supply. In chapter 3 there is an introduction to solid surfaces and surface roughness, and a summary of contact mechanics. Chapter 4 contains a brief introduction to friction and wear, and a good discussion of the selection of bearing materials.

The largest portion of the book, part II, deals with fluid film lubrication and its application to bearing design and analysis. First there are two chapters in which the principles of viscous flow are presented and the Reynolds equation is developed in a coherent manner. Solutions are given for several simple cases (including a slider bearing pad). Methods for dealing with turbulence and rough surfaces are discussed. There are then five chapters that each focus on one type of fluid film bearing: thrust bearings, journal bearings, squeeze film bearings, hydrostatic (externally pressurized) bearings and gas bearings, and one chapter dealing with unlubricated or partially lubricated sliding bearings. In each chapter there is some discussion of the theoretical background, followed by practically useful methods for design and performance analysis of the bearings. In particular, the design methodology favored by the authors is tabulated data, design charts, and curves. There are many worked examples showing how the methodology is applied and many practical recommendations for use in bearing design. There is discussion of important phenomena such as cavitation and thermal effects, information about various bearing geometries, and some discussion of dynamic behavior.

The final part of the book deals with rolling element bearing design and analysis. First the types of rolling element bearings, their geometries, operating principles, and performance limits are described. There is a short discussion of force and stress analysis in ball and roller bearings, and life and load capacity prediction. Recommendations are presented for bearing selection and installation and for lubricant selection. The discussion of elasto-hydrodynamic lubrication is relatively brief.

The entire book contains many worked examples and there are numerous problems at the end of each chapter that could be assigned to students. The book is very suitable either for self-study or for use as a textbook in a course dealing with applied tribology and/or bearing design. It contains a wealth of information that would prove useful in bearing design or performance analysis and includes sufficient theoretical background to provide a firm foundation for the design information. It would also be a good addition to the bookshelf of practicing engineers who deal with the design of machine elements in general and bearing design in particular.