Abstract
The existing fractal contact model fails to solve the problem of online real-time irregular curvilinear contact under mixed lubrication conditions. In this study, a novel arbitrary curve contact model is established, considering the actual operating condition that occurs under mixed lubrication. Furthermore, a new online friction–thermal–load coupling model for an arbitrary curve contact under mixed lubrication conditions is presented, considering the actual operating condition. To investigate the effects of the proposed online friction–thermal–load coupling model, a 30,205 tapered roller bearing with curved contact is examined by reading the real-time key point temperatures using thermocouple. Finally, the effectiveness of the presented model is verified through experiments and comparison.
References
1.
Argatov
, I. I.
, and Chai
, Y.-S.
, 2021
, “Fretting Wear With Variable Coefficient of Friction in Gross Sliding Conditions
,” Tribol. Int.
, 153
, p. 106555
. 2.
Simon
, V. V.
, 2019
, “Improved Mixed Elastohydrodynamic Lubrication of Hypoid Gears by the Optimization of Manufacture Parameters
,” Wear
, 438–439
, p. 102722
. 3.
Wettstein
, A.
, Kretschmer
, T.
, and Matthiesen
, S.
, 2020
, “Investigation of Dynamic Friction During Impact Tightening of Bolted Joints
,” Tribol. Int.
, 146
, p. 106251
. 4.
Ando
, Y.
, and Sumiya
, T.
, 2020
, “Friction Properties of Micro/Nanogroove Patterns Under Lubricating Conditions
,” Tribol. Int.
, 151
, p. 106428
. 5.
Bachchhav
, B.
, and Bagchi
, H.
, 2020
, “Effect of Surface Roughness on Friction and Lubrication Regimes
,” Mater. Today: Proc.
, 38
, pp. 169
–173
. 10.1016/j.matpr.2020.06.2526.
Bhaumik
, S.
, Chowdhury
, D.
, Batham
, A.
, Sehgal
, U.
, Ghosh
, C.
, Bhattacharya
, B.
, and Datta
, S.
, 2020
, “Analysing the Frictional Properties of Micro Dimpled Surface Created by Milling Machine Under Lubricated Condition
,” Tribol. Int.
, 146
, p. 106260
. 7.
Witte
, D. C.
, 1973
, “Operating Torque of Tapered Roller Bearings
,” ASLE Trans.
, 16
(1
), pp. 61
–67
. 8.
Zhou
, R.-S.
, and Hoeprich
, M. R.
, 1991
, “Torque of Tapered Roller Bearings
,” ASME J. Tribol.
, 113
(3
), pp. 590
–597
. 9.
Blake
, J. J.
, and Truman
, C. E.
, 2004
, “Measurement of Running Torque of Tapered Roller Bearings
,” J. Eng. Tribol.
, 218
(4
), pp. 239
–250
. 10.
Tarawneha
, C. M.
, Coleb
, K. D.
, Wilsonb
, B. M.
, and Alnaimata
, F.
, 2008
, “Experiments and Models for the Thermal Response of Railroad Tapered-Roller Bearings
,” Int. J. Heat Mass Transfer
, 51
(25–26
), pp. 5794
–5803
. 11.
Zhou
, Y. K.
, Zhu
, H.
, and Zuo
, X.
, 2015
, “The Nonlinear Nature of Friction Coefficient in Lubricated Sliding Friction
,” Tribol. Int.
, 88
, pp. 8
–16
. 12.
Wang
, S.
, Cusano
, C.
, and Conry
, T. F.
, 1993
, “A Dynamic Model of the Torque and Heat Generation Rate in Tapered Roller Bearings Under Excessive Sliding Conditions
,” Tribol. Trans.
, 36
(4
), pp. 513
–524
. 13.
Wang
, A.-L.
, and Wang
, J.-G.
, 2014
, “Temperature Distribution and Scuffing of Tapered Roller Bearing
,” Chin. J. Mech. Eng.
, 27
(6
), pp. 1272
–1279
. 14.
Tong
, V. C.
, and Hong
, S. H.
, 2016
, “The Effect of Angular Misalignment on the Running Torques of Tapered Roller Bearings
,” Tribol. Int.
, 95
, pp. 76
–85
. 15.
Houpert
, L.
, 2002
, “Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical, and Experimental Results
,” Tribol. Trans.
, 45
(3
), pp. 345
–353
. 16.
Renger
, A.
, and Johnson
, K. L.
, 1989
, Contact Mechanics
, Cambridge University Press
, Cambridge, UK
, Chap. 4.17.
Greenwood
, J.
, and Williamson
, J.
, 1966
, “Contact of Nominally Flat Surfaces
,” Proc. R. Soc. A: Math. Phys. Eng. Sci.
, 295
, pp. 300
–319
.18.
Majumdar
, A.
, and Bhushan
, B.
, 1990
, “Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces
,” ASME J. Tribol.
, 112
(2
), pp. 205
–216
. 19.
Chang
, W.
, Etsion
, I.
, and Bogy
, D.
, 1988
, “Static Friction Coefficient Model for Metallic Rough Surfaces
,” ASME J. Tribol.
, 110
(1
), pp. 57
–63
. 20.
Zhao
, Y.
, Maietta
, D.
, and Chang
, L.
, 2000
, “An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow
,” ASME J. Tribol.
, 122
(1
), pp. 86
–93
. 21.
Li
, L.
, Etsion
, I.
, and Talke
, F. E.
, 2010
, “Contact Area and Static Friction of Rough Surfaces With High Plasticity Index
,” ASME J. Tribol.
, 132
(3
), p. 031401
. 22.
Pan
, W.
, Li
, X.
, Wang
, L.
, Mu
, J.
, and Yang
, Z.
, 2017
, “Influence of Surface Topography on Three-Dimensional Fractal Model of Sliding Friction
,” AIP Adv.
, 7
(9
), p. 095321
. 23.
Liu
, W.
, Ni
, H.
, Wang
, P.
, and Zhao
, B.
, 2020
, “Analytical Investigation of the Friction Reduction Performance of Longitudinal Vibration Based on the Modified Elastoplastic Contact Model
,” Tribol. Int.
, 146
, p. 106237
. 24.
Han
, L.
, Zhang
, D.
, and Wang
, F.
, 2013
, “Predicting Film Parameter and Friction Coefficient for Helical Gears Considering Surface Roughness and Load Variation
,” Tribol. Trans.
, 56
(1
), pp. 49
–57
. 25.
Demkin
, N. B.
, and Izmailov
, V. V.
, 1991
, “Surface Topography and Properties of Frictional Contacts
,” Tribol. Int.
, 24
(1
), pp. 21
–24
. 26.
Shi
, J.
, Cao
, X.
, and Zhu
, H.
, 2014
, “Tangential Contact Stiffness of Rough Cylindrical Faying Surfaces Based on the Fractal Theory
,” ASME J. Tribol.
, 136
(4
), p. 041401
. 27.
Liu
, Y.
, Wang
, Y.
, Chen
, X.
, and Yu
, H.
, 2018
, “A Spherical Conformal Contact Model Considering Frictional and Microscopic Factors is Based on Fractal Theory
,” Chaos Solitons Fractals
, 111
, pp. 96
–107
. 28.
Matuszak
, A.
, 2000
, “Factors Influencing Friction in Steel Sheet Forming
,” J. Mater. Process Technol.
, 106
(1–3
), pp. 250
–253
. 29.
Qian
, S.
, Guo
, D.
, Liu
, S.
, and Lu
, X.
, 2011
, “Experimental Investigation of Lubrication Failure of Polyalphaolefin Oil Film at High Slide/Roll Ratios
,” Tribol. Lett.
, 44
(2
), pp. 107
–115
. 30.
Kletzli
, D. B.
, Cusano
, C.
, and Conry
, T. F.
, 1999
, “Thermally Induced Failures in Railroad Tapered Roller Bearings
,” Tribol. Trans.
, 42
(4
), pp. 824
–832
. 31.
Yan
, K.
, Wang
, N.-G.
, Zhai
, Q.-G.
, Zhu
, Y.-S.
, Zhang
, J.-H.-
, and Niu
, Q.-B.
, 2015
, “Theoretical and Experimental Investigation on the Thermal Characteristics of Double-Row Tapered Roller Bearings of High Speed Locomotive
,” Int. J. Heat Mass Transfer
, 84
, pp. 1119
–1130
. 32.
Ai
, S.-Y.
, Wang
, W.-Z.
, Wang
, Y.-L.
, and Zhao
, Z.-Q.
, 2015
, “Temperature Rise of Double-Row Tapered Roller Bearings Analyzed With the Thermal Network Method
,” Tribol. Int.
, 87
, pp. 11
–22
. 33.
Winer
, W.
, Bair
, S.
, and Gecim
, B.
, 1986
, “Thermal Resistance of a Tapered Roller Bearing
,” Tribol. Trans.
, 29
(4
), pp. 539
–547
. 34.
Johnson
, K. L.
, Greenwood
, J. A.
, and Poon
, S. Y.
, 1972
, “A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication
,” Wear
, 19
(1
), pp. 91
–108
. 35.
Su
, C.
, and Chen
, W.-F.
, 2021
, “Thermal Behavior on Motorized Spindle Considering Bearing Thermal Deformation Under Oil-Air Lubrication
,” J. Manuf. Process.
, 72
, pp. 483
–499
. 36.
Huang
, K.
, Zhao
, H.
, and Chen
, Q.
, 2008
, “Research of Fractal Contact Model on Contact Carrying Capacity of Two Cylinders’ Surface
,” Chin. J. Tribol.
, 28
(6
), pp. 529
–533
.37.
Yan
, W.
, and Komvopoulos
, K.
, 1998
, “Contact Analysis of Elastic-Plastic Fractal Surfaces
,” J. Appl. Phys.
, 84
(7
), pp. 3617
–3624
. 38.
Pan
, W.-J.
, Li
, X.
, Wang
, L.
, Guo
, N.
, and Mu
, J.
, 2017
, “A Normal Contact Stiffness Fractal Prediction Model of Dry-Friction Rough Surface and Experimental Verification
,” Eur. J. Mech. A: Solids
, 66
, pp. 94
–102
. 39.
Pan
, W.-J.
, Li
, X.
, Wang
, L.
, Guo
, N.
, and Yang
, Z.
, 2018
, “Influence of Contact Stiffness of Joint Surfaces on Oscillation System Based on the Fractal Theory
,” Arch. Appl. Mech.
, 88
(4
), pp. 525
–541
. 40.
Moes
, H.
, 1992
, “Optimum Similarity Analysis With Applications to Elastohydrodynamic Lubrication
,” Wear
, 159
(1
), pp. 57
–66
. 41.
Greenwood
, J. A.
, and Tripp
, J. H.
, 1970
, “The Contact of Two Nominally Flat Rough Surfaces
,” Proc. Inst. Mech. Eng., Part I
, 185
(1
), pp. 625
–634
. 42.
Gelinck
, E. R. M.
, and Schipper
, D. J.
, 2000
, “Calculation of Stribeck Curves for Line Contacts
,” Tribol. Int.
, 33
(3–4
), pp. 175
–181
. 43.
Liu
, Q.
, Napel
, W. T.
, Tripp
, J. H.
, Lugt
, P. M.
, and Meeuwenoord
, R.
, 2009
, “Friction in Highly Loaded Mixed Lubricated Point Contacts
,” Tribol. Trans.
, 52
(3
), pp. 360
–369
. 44.
Gelinck
, E. R. M.
, and Schipper
, D. J.
, 1999
, “Deformation of Rough Line Contacts
,” ASME J. Tribol.
, 121
(3
), pp. 449
–454
. Copyright © 2022 by ASME
You do not currently have access to this content.
