In this study, a comprehensive mechanical efficiency model based on the thermal elastohydrodynamic lubrication (TEHL) is developed for a helical gear pair. The tribological performance of the helical gear pair is evaluated in terms of the average film thickness, friction coefficient, mechanical power loss, mechanical efficiency, etc. The influence of basic design parameters, working conditions, thermal effect, and surface roughness are studied under various transmission ratios. Results show that the contribution of thermal effect on the tribological performance is remarkable. Meanwhile, the rolling power loss constitutes an important portion of the total mechanical power loss, especially around the meshing position where the pitch point is located in the middle of contact line and the full elastohydrodynamic lubrication (EHL) state with the friction coefficient less than 0.005. The proper increase of normal pressure angle and number of tooth can improve the tribological performance. The influence of helix angle on the mechanical efficiency is less significant. A positive addendum modification coefficient for pinion and a negative addendum modification coefficient for wheel are good for improving the mechanical efficiency. The results provide the tribological guidance for design of a helical gear pair in engineering.
Parametric Studies of Mechanical Power Loss for Helical Gear Pair Using a Thermal Elastohydrodynamic Lubrication Model
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received January 17, 2018; final manuscript received June 21, 2018; published online August 20, 2018. Assoc. Editor: Yi Zhu.
- Views Icon Views
- Share Icon Share
- Search Site
Liu, M., Xu, P., and Yan, C. (August 20, 2018). "Parametric Studies of Mechanical Power Loss for Helical Gear Pair Using a Thermal Elastohydrodynamic Lubrication Model." ASME. J. Tribol. January 2019; 141(1): 011502. https://doi.org/10.1115/1.4040723
Download citation file: