Abstract

An analysis is developed to calculate the static and dynamic characteristics for a rough seal that includes inertia effects. The method is detailed for a seal made up of a rough stator and a smooth rotor, a configuration which presents some peculiarities modifying the pattern of the model of turbulence where roughness effects and flow equations are included. A geometry with two identically roughened surfaces can be considered as a special case of the first one. In an earlier study, we developed a model of turbulence built from Prandtl's relation and Van Driest's mixing length method including roughness effects. This model is used to calculate the zeroth-order coefficients of turbulence kx, kz, the Couette velocity ucr for a roughened stator as well as the inertia coefficients. These coefficients derive from the numerical solution of the Generalized Couette Flow. The effects of inertia forces in the film are taken into account in an integrated way according to the film height and are expressed versus the mean velocity. Flow equations are derived from Navier-Stokes’ equations and from the continuity equation for incompressible flows. An analytical perturbation of the flow parameters leads to a set of zeroth-order and first-order equations. The integration of nonlinear zeroth-order equations leads to the steady state solution which permits the calculation of the seal leakage and static load. Dynamic stiffness, damping and added mass coefficients are obtained from the integration of the linear first-order equations. Comparisons are made with the results of the Bulk-flow theory applied to rough seals.

Issue Section:
Research Papers
Topics:
Inertia (Mechanics), Surface roughness, Turbulence, Flow (Dynamics), Stators, Damping, Geometry, Leakage, Navier-Stokes equations, Rotors, Steady state, Stiffness, Stress
1.
Childs, D. W., 1993, Turbomachinery Phenomena, Modelling, and Analysis, Wiley, New York, NY.
2.
Childs
D. W.
, and
Chang-Ho
Kim
,
1985
, “
Analysis and Testing for Rotordynamic Coefficients of Turbulent Annular Seals With Different, Directionally-Homogeneous Surface-Roughness Treatment for Rotor and Stator Elements
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
107
, pp.
296
–
306
.
3.
Childs
D. W.
, and
Garcia
F.
,
1987
, “
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
109
, pp.
124
–
128
.
4.
Childs
D. W.
,
Elrod
D.
, and
Hale
K.
,
1989
, “
Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
111
, pp.
293
–
301
.
5.
Constantinescu, V. N., 1970, “On the Influence of Inertia Forces in Turbulent and Laminar Self-Acting Films,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, July, pp. 473–481.
6.
Constantinescu, V. N., 1975, “Superlaminar Flow in Bearings,” Proceedings of the 2nd Leeds Lyon Symposium on Tribology, Mechanical Engineers Publications, London.
7.
Constantinescu
V. N.
, and
Galetuse
S.
,
1976
, “
Pressure Drop due to Inertia Forces in Step Bearings
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
98
, pp.
167
–
174
.
8.
Constantinescu
V. N.
,
Galetuse
S.
, and
Kennedy
F.
,
1975
, “
On the Comparison Between Lubrication Theory, Including Turbulence and Inertia Forces, and Some Existing Experimental Data
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
97
, pp.
439
–
449
.
9.
Elrod, H. G., and Ng, C. W., 1967, “A Theory for Turbulent Fluid Films and its Application to Bearings,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, pp. 346–362.
10.
Freˆne, J., 1974, “Re´gimes d’Ecoulement non Laminaire en Films Minces, Application aux Paliers Lisses,” Thesis of the University of Lyon, France.
11.
Hashimoto
H.
, and
Wada
S.
,
1989
, “
Theorical Approach to Turbulent Lubrication Problems Including Surface Roughness Effects
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
111
, pp.
17
–
22
.
12.
Hirs, G. G., 1973, “A Bulk Flow Theory for Turbulence in Lubricant Films,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, Apr., pp. 137–146.
13.
Lucas
V.
,
Danaila
S.
,
Bonneau
O.
, and
Freˆne
J.
,
1994
, “
Roughness Influence on Turbulent Flow through Annular Seals
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
116
, No.
2
, Apr., pp.
321
–
329
.
14.
Nelson
C. C.
, and
Nguyen
D. T.
,
1987
, “
Comparison of Hirs’ Equation with Moody’s Equation for Determining Rotordynamic Coefficients of Annular Pressure Seals
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
109
, pp.
144
–
148
.
15.
Schlichting, H., 1951, Boundary-Layer Theory, translated by Kestin, J., McGraw-Hill, New York, seventh edition 1987, pp. 578–583.
16.
Simon, F., 1989, “Comportement Dynamique des Joints Annulaires a` Fuite. Mode´lisation des Forces d’Inertie Convective en Re´gime Turbulent Stationnaire et Instationnaire,” Thesis of the University of Poitiers., France.
17.
Simon
F.
, and
Freˆne
J.
,
1992
, “
Analysis for Incompressible Flow in Annular Pressure Seals
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
114
, pp.
431
–
438
.
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.