Applicability of Heat Mirrors in Reducing Thermal Losses in Concentrating Solar Collectors

In the present work, a novel parabolic trough receiver design has been proposed. The proposed design is similar to the conventional receiver design except for the envelope and the annulus part. Here, a certain portion of the conventional glass envelope is coated with Sn-In₂O₃ and also Sn-In₂O₃ coated glass baffles are provided in the annulus part to reduce the radiative losses. The optical properties of the coated glass are such that it allows most of the solar irradiance to pass through, but reflects the emitted long wavelength radiations back to the absorber tube. Sn-In₂O₃ coated glass is referred to as “transparent heat mirror.” Thus, effectively reducing the heat loss area and improving the thermal efficiency of the solar collector. A detailed one-dimensional steady-state heat transfer model has been developed to predict the performance of the proposed receiver design. It was observed that while maintaining the same external conditions (such as ambient/initial temperatures, wind speed, solar insolation, flow rate, and concentration ratio), the heat mirror-based parabolic trough receiver design has about 3–5% higher thermal efficiency as compared to the conventional receiver design. Furthermore, the heat transfer analysis reveals that depending on the spatial incident solar flux distribution, there is an optimum circumferential angle (θ = θ_optimum, where θ is the heat mirror circumferential angle) up to which the glass envelope should be coated with Sn-In₂O₃. For angles higher than the optimum angle, the collector efficiency tends to decrease owing to increase in optical losses.