Fatigue crack growth was numerically simulated for various internal surface cracks with initially either semi-elliptical or irregular crack fronts. The simulation was directly based on a series of three-dimensional finite element analyses from which the stress intensity factors along the front of growing cracks were estimated. The fatigue crack growth law obtained from small laboratory specimens was incrementally integrated at a set of points along the crack front, and a new crack front was then re-established according to the local advances at this set of points by using a cubic spline curve. This method enabled the crack shape to be predicted without having to make the usual assumption of semi-elliptical shape. Fatigue analysis results are presented and discussed for fatigue shape developments and deviations from the semi-elliptical shape, aspect ratio changes, stress intensity factor variations during crack growth, and fatigue life predictions. Some of the results were also compared with those obtained by two simplified methods based on one and two degree-of-freedom models, respectively.

Issue Section:
Research Papers
Topics:
Fatigue, Pressure vessels, Surface cracks, Fracture (Materials), Shapes, Fatigue cracks, Stress, Degrees of freedom, Fatigue analysis, Fatigue life, Finite element analysis, Simulation, Splines
1.
ASME Boiler and Pressure Vessel Code, 1977, “Rules for In-Service Inspection of Nuclear Power Plant Components,” Section XI.
2.
Borsoum
R. S.
,
1976
, “
On the Use of Isoparametric Finite Elements in Linear Fracture Mechanics
,”
International Journal for Numerical Methods in Engineering
, Vol.
10
, pp.
25
–
37
.
3.
British Standards Institution, 1980, “Guidance on Some Methods for the Derivation of Acceptance Levels for Defects in Fusion Welded Joints,” Section 3, BSI PD6493.
4.
Cai
G. Z.
,
Zhang
K. D.
, and
Wu
D. D.
,
1995
, “
Stress Intensity Factors for Internal Semielliptical Surface Cracks in Pressurized Thick-walled Cylinders Using the Hybrid Boundary-Element Method
,”
Engineering Fracture Mechanics
, Vol.
52
(
6
), pp.
1055
–
1064
.
5.
Chen
D. H.
,
Nisitani
H.
, and
Mori
K.
,
1995
, “
Stress Intensity Factors for an Internal Semielliptical Surface Crack in Cylindrical Pressure Vessels
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
117
, pp.
213
–
221
.
6.
Desjardins
J. L.
,
Burns
D. J.
, and
Thompson
J. C.
,
1991
, “
A Weight Function Technique for Estimating Stress Intensity Factors for Cracks in High-Pressure Vessels
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
113
, pp.
10
–
21
.
7.
Henshell
R. D.
, and
Shaw
K. G.
,
1975
, “
Crack Tip Finite Elements Are Unnecessary
,”
International Journal for Numerical Methods in Engineering
, Vol.
9
, pp.
495
–
507
.
8.
Kirkhope
K. J.
,
Bell
R.
, and
Kirkhope
J.
,
1990
, “
Stress Intensity Factor Equations for Single and Multiple Cracked Pressurized Thick-Walled Cylinders
,”
International Journal of Pressure Vessels and Piping
, Vol.
41
(
1
), pp.
103
–
111
.
9.
Kirkhope
K. J.
,
Bell
R.
, and
Kirkhope
J.
,
1991
, “
Stress Intensity Factors Equations for Single and Multiple Semielliptical Surface Cracks in Pressurized Thick-walled Cylinders
,”
International Journal of Pressure Vessels and Piping
, Vol.
47
(
2
), pp.
247
–
257
.
10.
Lee
Y. S.
, and
Raymund
M.
,
1983
, “
Stress Intensity Factor Solutions for Internal Longitudinal Semi-Circular Surface Flaws in a Cylinder under Arbitrary Loading
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
105
, pp.
309
–
315
.
11.
Lin, X. B., 1994, Numerical Simulation of Fatigue Crack Growth, Ph.D. thesis, The University of Sheffield, UK.
12.
Lin
X. B.
, and
Smith
R. A.
,
1997
, “
An Improved Numerical Technique for Simulating the Growth of Planar Fatigue Cracks
,”
Fatigue and Fracture of Engineering Materials and Structures
, Vol.
20
(
10
), pp.
1363
–
1373
.
13.
Navid
H.
,
Fenner
R. T.
,
Nadiri
F.
, and
Webster
G. A.
,
1985
, “
Stress Intensity Factors for Internal and External Cracks in Pressurised Thick-Walled Cylinders
,”
International Journal of Pressure Vessels and Piping
, Vol.
18
, pp.
241
–
254
.
14.
Newman
J. C.
, and
Raju
I. S.
,
1980
, “
Stress Intensity Factors for Internal Surface Cracks in Cylindrical Vessels
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
102
, pp.
3427
-
246
.
15.
Newman
J. C.
, and
Raju
I. S.
,
1981
, “
An Empirical Stress Intensity Factor Equation for the Surface Crack
,”
Engineering Fracture Mechanics
, Vol.
15
, pp.
185
–
192
.
16.
Raju
I. S.
, and
Newman
J. C.
,
1982
, “
Stress-Intensity Factors for Internal and External Surface Cracks in Cylindrical Vessels
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
104
, pp.
293
–
298
.
17.
Tan
C. L.
, and
Shim
M. L.
,
1986
, “
Stress Intensity Factor Influence Coefficients for Internal Surface Cracks in Thick-Walled Cylinders
,”
International Journal of Pressure Vessels and Piping
, Vol.
24
(
1
), pp.
49
–
72
.
18.
Zheng
X. J.
, and
Glinka
G.
,
1995
, “
Weight Functions and Stress Intensity Factors for Longitudinal Semi-Elliptical Cracks in Thick-Walled Cylinders
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
117
, pp.
383
–
389
.
19.
Zheng
X. J.
,
Glinka
G.
, and
Dubey
R. N.
,
1995
, “
Calculation of Stress Intensity Factors for Semielliptical Cracks in a Thick-wall Cylinder
,”
International Journal of Pressure Vessels and Piping
, Vol.
62
(
3
), pp.
249
–
258
.
20.
Zhang
Y. H.
,
Huang
Z. Z.
,
Chen
L. Y.
, and
Pan
B. Z.
,
1991
, “
A Study of the Stress Intensity Factors for Single or Multiple Cracks in Thick-Walled Cylinders
,”
Nuclear Engineering and Design
, Vol.
129
(
3
), pp.
277
–
285
.
This content is only available via PDF.
Copyright © 1998
 by The American Society of Mechanical Engineers
You do not currently have access to this content.