An experimental study into the ductile deformations and static and impact perforation of mild steel plates is reported in Part I. These results are discussed in this article and compared with other experimental data reported in the literature. The accuracy of various empirical formulas for the impact perforation of plates is also examined.
Issue Section:
Research Papers
1.
Backman
M. E.
Goldsmith
W.
1978
, “The Mechanics of Penetration of Projectiles into Targets
,” International Journal of Engineering Science
, Vol. 16
, pp. 1
–99
.2.
Corran
R. S. J.
Shadbolt
P. J.
Ruiz
C.
1983
, “Impact Loading of Plates—An Experimental Investigation
,” International Journal of Impact Engineering
, Vol. 1
, No. 1
, pp. 3
–22
.3.
Jones, N., 1989a, Structural Impact, Cambridge University Press, Cambridge, U.K.
4.
Jones, N., 1989b, “Some Comments on the Modelling of Material Properties for Dynamic Structural Plasticity,” Mechanical Properties of Materials at High Rates of Strain, ed., J. Harding, Institute of Physics Conference Series No. 102, Bristol, U.K., pp. 435–445.
5.
Jones
N.
Kim
S. B.
1997
, “A Study on the Large Ductile Deformations and Perforation of Mild Steel Plates Struck by a Mass—Part I: Experimental Results
,” ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol. 119
, May, pp. 178
–184
.6.
Jowett, J., 1986, “The Effects of Missile Impact on Thin Metal Structures,” Report UKAEA SRD R378.
7.
Langseth, M., and Larsen, P. K., 1988, “Dropped Objects. Plugging Capacity of Steel Plates,” Boss ’88, Proceedings of the Conference on the Behaviour of Offshore Structures, eds., T. Moan et al. Vol. 3, pp. 1001–1014.
8.
Langseth
M.
Larsen
P. K.
1990
, “Dropped Objects’ Plugging Capacity of Steel Plates: An Experimental Investigation
,” International Journal of Impact Engineering
, Vol. 9
, No. 3
, pp. 289
–316
.9.
Lethaby, J. W., and Skidmore, I. C., 1974, “The Deformation and Plugging of Thin Plates by Projectile Impact,” Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conference Series No. 21, pp. 429–441.
10.
Neilson
A. J.
1985
, “Empirical Equations for the Perforation of Mild Steel Plates
,” International Journal of Impact Engineering
, Vol. 3
, pp. 137
–142
.11.
Wen, H. M., and Jones, N., 1992, “Semi-Empirical Equations for the Perforation of Plates Struck by a Mass,” Structures Under Shock and Impact II, ed., P. S. Bulson, Computational Mechanics Publications, Southampton and Thomas Telford, London, U.K., pp. 369–380.
12.
Wen
H. M.
Jones
N.
1993
, “Experimental Investigation of the Scaling Laws for Metal Plates Struck by Large Masses
,” International Journal of Impact Engineering
, Vol. 13
, No. 3
, pp. 485
–505
.13.
Wen
H. M.
Jones
N.
1994
, “Experimental Investigation into the Dynamic Plastic Response and Perforation of a Clamped Circular Plate Struck Transversely by a Mass
,”), Journal of Mechanical Engineering Science
Proceedings, Institution of Mechanical Engineers, Vol. 208
(C
, pp. 113
–137
.14.
White, R. W., and Botsford, N. B., 1963, “Containment of Fragments from a Runaway Reactor,” Technical Report No. 6, SRIA-113.
15.
Woodward
R. L.
de Morton
M. E.
1976
, “Penetration of Targets by Flat-Ended Projectiles
,” International Journal of Mechanical Sciences
, Vol. 18
, pp. 119
–127
.16.
Zabel, N. R., 1958, “Containment of Fragments from a Runaway Reactor,” Stanford Research laboratory Technical Report No. 1, SRIA-1, CA.
17.
Zaid
A. I. O.
El-Kalay
A.
Travis
F. W.
1973
, “An Examination of the Perforation of a Mild Steel Plate by a Flat-Ended Cylindrical Projectile
,” International Journal of Mechanical Sciences
, Vol. 15
, pp. 129
–143
.18.
Zaid
A. I. O.
Travis
F. W.
1974
a, “An Examination of the Effect of Target Thickness in the Perforation of Mild Steel Plate by a Flat-Ended Projectile
,” International Journal of Mechanical Sciences
, Vol. 16
, pp. 373
–383
.19.
Zaid, A. I. O., and Travis, F. W., 1974b, “A Comparison of Single and Multi-Plate Shields Subjected to Impact by a High Speed Projectile,” Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conference Series No. 21, pp. 417–428.
This content is only available via PDF.
Copyright © 1997
by The American Society of Mechanical Engineers
You do not currently have access to this content.