The results of five tests on narrow stiffened panels under axial compression until collapse and beyond are presented to investigate the collapse behaviors of stiffened panels. Tension tests were used to evaluate the material properties of the stiffened panels. The tests were made on panels with two half bays plus one full bay in the longitudinal direction. Initial loading cycles were used to eliminate the residual stresses of the stiffener panels. The strain gauges were set on the plates and the stiffeners to record the strain histories. The displacement load relationship was established. The collapse behavior, modes of failure and load-carrying capacity of the stiffened panels are investigated with the experiment.
Issue Section:
Materials Technology
References
1.
IACS
, 2006
, “Common Structural Rules for Double Hull Oil Tankers
,” International Association of Classification Societies
, London
.2.
IACS
, 2006
, “Common Structural Rules for Bulk Carriers
,” International Association of Classification Societies
, London
.3.
Faulkner
, D.
, 1977
, “Compression Tests on Welded Eccentrically Stiffened Plate Panels
,” Steel Plated Structures
, P. J.
Dowling
, J. E. Harding
, and P. A. Frieze
, eds., Crosby Lockwood Staples
, London
, pp. 130
–139
.4.
Smith
, C.
, 1979
, “Compressive Strength of Welded Steel Ship Grillages
,” Trans. RINA
, 117
, pp. 325
–359
.5.
Tanaka
, Y.
, and Endo
, H.
, 1988
, “Ultimate Strength of Stiffened Plates With Their Stiffeners Locally Buckled in Compression
,” J. Soc. Nav. Archit. Jpn.
, 164
, pp. 456
–467
.10.2534/jjasnaoe1968.1988.164_4566.
Ghavami
, K.
, 1994
, “Experimental Study of Stiffened Plates in Compression up to Collapse
,” J. Constr. Steel Res.
, 28
(2
), pp. 197
–222
.10.1016/0143-974X(94)90043-47.
Ghavami
, K.
, and Khedmati
, M. R.
, 2006
, “Numerical and Experimental Investigations on the Compression Behaviour of Stiffened Plates
,” J. Constr. Steel Res.
, 62
, pp. 1087
–1100
.10.1016/j.jcsr.2006.06.0268.
Chen
, Q.
, Zimmerman
, T. J. E.
, DeGeer
, D.
, and Kennedy
, B. W.
, 1997
, “Strength and Stability Testing of Stiffened Plate Components
,” Ship Structural Committee Report No. SSC-399.9.
Hu
, S. Z.
, Chen
, Q.
, Pegg
, N.
, and Zimmerman
, T. J. E.
, 1997
, “Ultimate Collapse Tests of Stiffened-Plate Ship Structural Units
,” Mar. Struct.
, 10
, pp. 587
–610
.10.1016/S0951-8339(97)00010-510.
Guedes Soares
, C.
, Luís
, R. M.
, Teixeira
, A. P.
, Quesnel
, T.
, Nikolov
, P. I.
, Steen
, E.
, Khan
, I. A.
, Toderan
, C.
, Olaru
, V. D.
, Bollero
, A.
, and Taczala
, M.
, 2008
, “Parametric Study on the Collapse Strength of Rectangular Plates With Localized Imperfections Under In-Plane Compression
,” Int. Shipbuild. Prog.
, 55
, pp. 63
–85
.10.3233/ISP-2008-003911.
Luís
, R. M.
, Witkowska
, M.
, and Guedes Soares
, C.
, 2008
, “Ultimate Strength of Transverse Plate Assemblies Under Uniaxial Loads
,” ASME J. Offshore Mech. Arct. Eng.
, 130
(2
), p. 021011
.10.1115/1.291341712.
Luís
, R. M.
, Guedes Soares
, C.
, and Nikolov
, P. I.
, 2008
, “Collapse Strength of Longitudinal Plate Assemblies With Dimple Imperfections
,” Ships and Offshore Structures
, 3
(4
), pp. 359
–370
.10.1080/1744530080237002413.
Gordo
, J. M.
, and Guedes Soares
, C.
, 2004
, “Experimental Evaluation of the Ultimate Bending Moment of a Box Girder
,” Marine Systems & Ocean Technology
, 1
(1
), pp. 33
–46
.14.
Gordo
, J. M.
, and Guedes Soares
, C.
, 2007
, “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder Under Bending Moment
,” Advancements in Marine Structures
, C.
Guedes Soares
and P. K.
Das
, eds., Taylor & Francis Group
, London
, pp. 377
–383
.15.
Saad-Eldeen
, S.
, Garbatov
, Y.
, and Guedes Soares
, C.
, 2010
, “Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Four-Point Bending Moment
,” Proceedings of the 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS2010)
, ABS
, Houston, TX
.16.
Saad-Eldeen
, S.
, Garbatov
, Y.
, and Guedes Soares
, C.
, 2011
, “Compressive Strength Assessment of a Moderately Corroded Box Girder
,” Marine System & Ocean Technology
, 6
, pp. 27
–37
.17.
Saad-Eldeen
, S.
, Garbatov
, Y.
, and Guedes Soares
, C.
, 2011
, “Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Severe Corrosion
,” Mar. Struct.
, 24
, pp. 338
–357
.10.1016/j.marstruc.2011.05.00218.
Gordo
, J. M.
, and Guedes Soares
, C.
, 2008
, “Compressive Tests on Short Continuous Panels
,” Mar. Struct.
, 21
, pp. 113
–137
.10.1016/j.marstruc.2007.12.00519.
Gordo
, J. M.
, and Guedes Soares
, C.
, 2011
, “Compressive Tests on Stiffened Panels of Intermediate Slenderness
,” Thin-Walled Struct.
, 49
, pp. 782
–794
.10.1016/j.tws.2011.02.00420.
Gordo
, J. M.
, and Guedes Soares
, C.
, 2012
, “Compressive Tests on Long Continuous Stiffened Panels
,” ASME J. Offshore Mech. Arct. Eng.
, 134
, p. 021403
.10.1115/1.400451721.
Xu
, M. C.
, and Guedes Soares
, C.
, 2011
, “Numerical Study of the Effect of Geometry and Boundary Conditions on the Collapse Behaviour of Short Stiffened Panels
,” Advances in Marine Structures
, C.
Guedes Soares
and W.
Fricke
, eds., Taylor & Francis Group
, London, UK
, pp. 229
–237
.Copyright © 2013 by ASME
You do not currently have access to this content.