Abstract
If the relationship between electromagnetic parameters and the stress state were characterized by analyzation, it would be helpful to evaluate and classify the flaws in the sample with eddy current thermography (ECT). This paper reported the numerical simulation of the influence of material electromagnetic parameters on the stress state in ECT testing. The influences of conductivity, magnetic permeability, and the thickness of its variation layer on eddy current density and Joule heating have been examined. The results show that the value of electromagnetic parameters and the thickness of its variation layer can be derived from the highest temperature and the distribution of temperature field obtained by using ECT.
Issue Section:
Technical Brief
References
1.
Hu
, B.
, and Yu
, R.
, 2016
, “Variations in Surface Residual Compressive Stress and Magnetic Induction Intensity of 304 Stainless Steel
,” NDT & E Int.
, 80
, pp. 1
–5
. 2.
Zhou
, D.
, Wang
, J.
, Zhang
, Q.
, Wu
, J.
, and Zhang
, H.
, 2015
, “Research on Sensing Mechanism of Ferromagnetic Component Flaw Using Pulsed Eddy Current Testing
,” Chin. J. Sci. Instrum.
, 36
(5
), pp. 989
–995
. 3.
Adewale
, I. D.
, and Tian
, G. Y.
, 2013
, “Decoupling the Influence of Permeability and Conductivity in Pulsed Eddy-Current Measurements
,” IEEE Trans. Magn.
, 49
(3
), pp. 1119
–1127
. 4.
Wang
, S. F.
, Wang
, W.
, Su
, S.
, and Zhang
, S. F.
, 2005
, “A Magneto-Mechanical Model on Differential Permeability and Stress of Ferromagnetic Material
,” J. Xi'an Univ. Sci. Technol.
, 25
(3
), pp. 288
–291
. 5.
Zeng
, J.
, Su
, L.
, Xu
, L.
, and Zhang
, Q. D.
, 2014
, “Research on the Stress Measurement of Steel Plate Based on Inverse Magnetostrictive Effect
,” J. Mech. Eng.
, 50
(8
), pp. 17
–22
. Copyright © 2022 by ASME
You do not currently have access to this content.