Abstract
To rapidly analyze the dynamic characteristics of a compliant stroke amplification mechanism (CSAM) with completely distributed compliance, an analytical model based on the dynamic stiffness matrix with consideration of the damping effect is proposed. The natural frequency of the CSAM is optimized without attenuation of the amplification ratio based on this model. The optimized CSAM exhibits an approximately 112% higher natural frequency than the original mechanism along the main motion direction. The optimization result is verified through finite element simulation, with less than a 7% difference being observed. Moreover, the effects of frequency on the amplification ratio and input stiffness of the optimized CSAM are also discussed. The structural resonance is defined as the failure criterion of the optimized CSAM, and the sensitivity of the failure probability to manufacturing errors at different positions is analyzed. The findings show that the failure probability of the CSAM is more sensitive to parameters associated with the coordinates of the output stage and vertex.
Issue Section:
Research Papers
References
1.
Soergel
, E.
, 2011
, “Piezoresponse Force Microscopy (PFM)
,” J. Phys. D: Appl. Phys.
, 44
(46
), p. 464003
. 2.
Seol
, D.
, Kim
, B.
, and Kim
, Y.
, 2017
, “Non-Piezoelectric Effects in Piezoresponse Force Microscopy
,” Curr. Appl. Phys.
, 17
(5
), pp. 661
–674
. 3.
Balke
, N.
, Bdikin
, I.
, Kalinin
, S. V.
, and Kholkin
, A. L.
, 2009
, “Electromechanical Imaging and Spectroscopy of Ferroelectric and Piezoelectric Materials: State of the Art and Prospects for the Future
,” J. Am. Ceram. Soc.
, 92
(8
), pp. 1629
–1647
. 4.
Xu
, Q.
, 2014
, “Design and Testing of a Novel Multi-Stroke Micropositioning System With Variable Resolutions
,” Rev. Sci. Instrum.
, 85
(2
) .5.
Dang
, M. P.
, Le
, H. G.
, Le Chau
, N.
, and Dao
, T. P.
, 2020
, “A Multi-Objective Optimization Design for a New Linear Compliant Mechanism
,” Optim. Eng.
, 21
(2
), pp. 673
–705
. 6.
Polit
, S.
, and Dong
, J.
, 2011
, “Development of a High-Bandwidth XY Nanopositioning Stage for High-Rate Micro-/Nanomanufacturing
,” IEEE/ASME Trans. Mechatron.
, 16
(4
), pp. 724
–733
. 7.
Liang
, H.
, Tang
, H.
, Huang
, L.
, Gao
, J.
, Chen
, X.
, To
, S.
, Li
, Y.
, and He
, Y.
, 2017
, “A Large-Stroke Flexure Fast Tool Servo With New Displacement Amplifier
,” 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM)
, Munich, Germany
, July 3–7
.8.
Tian
, F.
, Yin
, Z.
, and Li
, S.
, 2016
, “A Novel Long Range Fast Tool Servo for Diamond Turning
,” Int. J. Adv. Manuf. Technol.
, 86
(5–8
), pp. 1227
–1234
. 9.
Lu
, H.
, Lee
, D.
, Kim
, J.
, and Kim
, S.
, 2014
, “Modeling and Machining Evaluation of Microstructure Fabrication by Fast Tool Servo-Based Diamond Machining
,” Precis. Eng.
, 38
(1
), pp. 212
–216
. 10.
Mercorelli
, P.
, and Werner
, N.
, 2017
, “An Adaptive Resonance Regulator Design for Motion Control of Intake Valves in Camless Engine Systems
,” IEEE Trans. Ind. Electron.
, 64
(4
), pp. 3413
–3422
. 11.
Stefanski
, F.
, Minorowicz
, B.
, Persson
, J.
, Plummer
, A.
, and Bowen
, C.
, 2017
, “Non-Linear Control of a Hydraulic Piezo-Valve Using a Generalised Prandtl–Ishlinskii Hysteresis Model
,” Mech. Syst. Signal Process.
, 82
(1
), pp. 412
–431
. 12.
Chen
, F.
, Zhang
, Q.
, Gao
, Y.
, and Dong
, W.
, 2020
, “A Review on the Flexure-Based Displacement Amplification Mechanisms
,” IEEE Access
, 8
, pp. 205919
–205937
. 13.
Dsouza
, R. D.
, Navin
, K. P.
, Theodoridis
, T.
, and Sharma
, P.
, 2018
, “Design, Fabrication and Testing of a 2 DOF Compliant Flexural Microgripper
,” Microsyst. Technol.
, 24
(9
), pp. 3867
–3883
. 14.
Shen
, X.
, Zhang
, L.
, and Qiu
, D.
, 2021
, “A Lever-Bridge Combined Compliant Mechanism for Translation Amplification
,” Precis. Eng.
, 67
(Apr.
), pp. 383
–392
. 15.
Lu
, Q.
, Nie
, Q.
, Jiang
, X.
, Cao
, Q.
, and Chen
, D.
, 2016
, “Magnetostrictive Actuator With Differential Displacement Amplification Mechanism
,” Mechanika
, 22
(4
), pp. 273
–278
.16.
Tian
, Y.
, Shirinzadeh
, B.
, Zhang
, D.
, and Alici
, G.
, 2009
, “Development and Dynamic Modelling of a Flexure-Based Scott-Russell Mechanism for Nano-Manipulation
,” Mech. Syst. Signal Process.
, 23
(3
), pp. 957
–978
. 17.
Ai
, W.
, and Xu
, Q.
, 2014
, “New Structural Design of a Compliant Gripper Based on the Scott-Russell Mechanism
,” Int. J. Adv. Rob. Syst.
, 11
(12
), pp. 1
–10
.18.
Wei
, H.
, Shirinzadeh
, B.
, Li
, W.
, Clark
, L.
, Pinskier
, J.
, and Wang
, Y.
, 2017
, “Development of Piezo-Driven Compliant Bridge Mechanisms: General Analytical Equations and Optimization of Displacement Amplification
,” Micromachines
, 8
(8
).19.
Ling
, M.
, Cao
, J.
, Jiang
, Z.
, and Lin
, J.
, 2017
, “Modular Kinematics and Statics Modeling for Precision Positioning Stage
,” Mech. Mach. Theory
, 107
(July
), pp. 274
–282
. 20.
Fujimura
, Y.
, Tsukamoto
, T.
, and Tanaka
, S.
, 2018
, “Piezoelectric Moonie-Type Resonant Microactuator
,” Electron. Commun. Jpn.
, 101
(3
), pp. 3
–10
. 21.
Lam
, K. H.
, Wang
, X. X.
, and Chan
, H. L. W.
, 2006
, “Lead-Free Piezoceramic Cymbal Actuator
,” Sens. Actuators, A
, 125
(2
), pp. 393
–397
.22.
Dong
, W.
, Chen
, F.
, Gao
, F.
, Yang
, M.
, Sun
, L.
, Du
, Z.
, Tang
, J.
, and Zhang
, D.
, 2018
, “Development and Analysis of a Bridge-Lever-Type Displacement Amplifier Based on Hybrid Flexure Hinges
,” Precis. Eng.
, 54
, pp. 171
–181
. 23.
Li
, H.
, Guo
, F.
, Wang
, Y.
, Wang
, Z.
, Li
, C.
, Ling
, M.
, and Hao
, G.
, 2022
, “Design and Modeling of a Compact Compliant Stroke Amplification Mechanism With Completely Distributed Compliance for Ground-Mounted Actuators
,” Mech. Mach. Theory
, 167
, p. 104566
. 24.
Qin
, Y.
, Shirinzadeh
, B.
, Zhang
, D.
, and Tian
, Y.
, 2013
, “Design and Kinematics Modeling of a Novel 3-DOF Monolithic Manipulator Featuring Improved Scott-Russell Mechanisms
,” ASME J. Mech. Des.
, 135
(10
), p. 101004. 25.
Kim
, J. H.
, Kim
, S. H.
, and Kwak
, Y. K.
, 2004
, “Development and Optimization of 3-D Bridge-Type Hinge Mechanisms
,” Sens. Actuators, A
, 116
(3
), pp. 530
–538
. 26.
Wu
, H.
, Lai
, L.
, Zhang
, L.
, and Zhu
, L.
, 2022
, “A Novel Compliant XY Micro-Positioning Stage Using Bridge-Type Displacement Amplifier Embedded With Scott-Russell Mechanism
,” Precis. Eng.
, 73
, pp. 284
–295
. 27.
Chen
, F.
, Liu
, L.
, Li
, Q.
, Epaarachchi
, J.
, Leng
, J.
, and Liu
, Y.
, 2018
, “Experimental and Theoretical Analysis of a Smart Transmission Mechanism System
,” Smart Mater. Struct.
, 27
(9
), p. 095022
. 28.
Guo
, F.
, Sun
, Z.
, Zhang
, S.
, Cao
, R.
, and Li
, H.
, 2022
, “Optimal Design and Reliability Analysis of a Compliant Stroke Amplification Mechanism
,” Mech. Mach. Theory
, 171, p. 104748
. 29.
Tang
, H.
, and Li
, Y.
, 2014
, “Development and Active Disturbance Rejection Control of a Compliant Micro-/Nanopositioning Piezostage With Dual Mode
,” IEEE Trans. Ind. Electron.
, 61
(3
), pp. 1475
–1492
. 30.
Zhu
, W. L.
, Zhu
, Z.
, Guo
, P.
, and Ju
, B. F.
, 2018
, “A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage With Totally Decoupled Kinematics
,” Mech. Syst. Signal Process.
, 99
(15
), pp. 747
–759
. 31.
Yu
, Y. Q.
, Howell
, L. L.
, Lusk
, C.
, Yue
, Y.
, and He
, M. G.
, 2005
, “Dynamic Modeling of Compliant Mechanisms Based on the Pseudo-Rigid-Body Model
,” ASME J. Mech. Des.
, 127
(4
), pp. 760
–765
. 32.
Guo
, Z.
, Tian
, Y.
, Liu
, C.
, Wang
, F.
, Liu
, X.
, Shirinzadeh
, B.
, and Zhang
, D.
, 2015
, “Design and Control Methodology of a 3-DOF Flexure-Based Mechanism for Micro/Nano-Positioning
,” Rob. Comput. Integr. Manuf.
, 32
, pp. 93
–105
. 33.
Ling
, M.
, Howell
, L. L.
, Cao
, J.
, and Jiang
, Z.
, 2018
, “A Pseudo-Static Model for Dynamic Analysis on Frequency Domain of Distributed Compliant Mechanisms
,” ASME J. Mech. Rob.
, 10
(5
), p. 051011. 34.
Ling
, M.
, Cao
, J.
, and Pehrson
, N.
, 2019
, “Kinetostatic and Dynamic Analyses of Planar Compliant Mechanisms via a Two-Port Dynamic Stiffness Model
,” Precis. Eng.
, 57
, pp. 149
–161
. 35.
Han
, F.
, Dan
, D.
, and Cheng
, W.
, 2018
, “Extension of Dynamic Stiffness Method to Complicated Damped Structures
,” Comput. Struct.
, 208
(1
), pp. 143
–150
. 36.
Yuan
, S.
, and Sun
, H.
, 2021
, “A General Adaptive Finite Element Eigen-Algorithm Stemming From Wittrick-Williams Algorithm
,” Thin Walled Struct.
, 161
, p. 107448
. 37.
Adhikari
, S.
, Karličić
, D.
, and Liu
, X.
, 2021
, “Dynamic Stiffness of Nonlocal Damped Nano-Beams on Elastic Foundation
,” Eur. J. Mech. A. Solids
, 86
.38.
Manohar
, C. S.
, and Adhikari
, S.
, 1998
, “Dynamic Stiffness of Randomly Parametered Beams
,” Probab. Eng. Mech.
, 13
(1
), pp. 39
–51
. 39.
Aquinostraat
, T. V.
, 2000
, “Transient Dynamics of Stochastically Parametered Beams
,” J. Eng. Mech.
, 126
(11
), pp. 1131
–1140
.Copyright © 2023 by ASME
You do not currently have access to this content.
