Skip Nav Destination
Issues
July 2004
ISSN 1050-0472
EISSN 1528-9001
In this Issue
Editorial
Editorial
J. Mech. Des. July 2004, 126(4): 561.
doi: https://doi.org/10.1115/1.1784824
Topics:
Design engineering
Technical Papers
An Integrated Framework for Optimization Under Uncertainty Using Inverse Reliability Strategy
J. Mech. Des. July 2004, 126(4): 562–570.
doi: https://doi.org/10.1115/1.1759358
Topics:
Design
,
Optimization
,
Reliability
,
Algorithms
,
Uncertainty
,
Noise (Sound)
,
Robustness
Geometric Tailoring: A Design for Manufacturing Method for Rapid Prototyping and Rapid Tooling
J. Mech. Des. July 2004, 126(4): 571–580.
doi: https://doi.org/10.1115/1.1758250
Interval Approach for the Modeling of Tolerances and Clearances in Mechanism Analysis
J. Mech. Des. July 2004, 126(4): 581–592.
doi: https://doi.org/10.1115/1.1760775
Topics:
Error analysis
,
Manipulators
,
Modeling
,
Design
,
Nonlinear equations
Rigid Body Motion Characteristics and Unified Instantaneous Motion Representation of Points, Lines, and Planes
J. Mech. Des. July 2004, 126(4): 593–601.
doi: https://doi.org/10.1115/1.1759361
Topics:
Algebra
,
Displacement
,
Screws
A Combined Penalty and Recursive Real-Time Formulation for Multibody Dynamics
J. Mech. Des. July 2004, 126(4): 602–608.
doi: https://doi.org/10.1115/1.1758257
Topics:
Automobiles
,
Errors
,
Multibody dynamics
,
Multibody systems
,
Robots
,
Simulation
,
Vehicles
,
Equations of motion
,
Degrees of freedom
,
Robustness
Analysis of Fully Reversed Sequences of Rotations of a Free Rigid Body
J. Mech. Des. July 2004, 126(4): 609–616.
doi: https://doi.org/10.1115/1.1758249
Topics:
Rotation
,
Space vehicles
,
Deformation
,
Microactuators
,
Jacobian matrices
,
Visualization
,
Kinematics
The Qualitative Synthesis of Parallel Manipulators
J. Mech. Des. July 2004, 126(4): 617–624.
doi: https://doi.org/10.1115/1.1667955
Topics:
Design
,
Displacement
,
Generators
,
Kinematics
,
Manipulators
,
Rotation
,
Topology
,
Robots
,
Kinematic chains
,
Algebra
Theory for Topology Synthesis of Parallel Manipulators and Its Application to Three-Dimension-Translation Parallel Manipulators
J. Mech. Des. July 2004, 126(4): 625–639.
doi: https://doi.org/10.1115/1.1758253
Topics:
Manipulators
,
Topology
,
Dimensions
,
Kinematics
,
Mechanical admittance
Forward Problem Singularities of Manipulators Which Become PS-2RS or 2PS-RS Structures When the Actuators are Locked
J. Mech. Des. July 2004, 126(4): 640–645.
doi: https://doi.org/10.1115/1.1758251
Topics:
Actuators
,
End effectors
,
Manipulators
Stiffness Modeling of the Soft-Finger Contact in Robotic Grasping
J. Mech. Des. July 2004, 126(4): 646–656.
doi: https://doi.org/10.1115/1.1758255
Bistable Configurations of Compliant Mechanisms Modeled Using Four Links and Translational Joints
J. Mech. Des. July 2004, 126(4): 657–666.
doi: https://doi.org/10.1115/1.1760776
Topics:
Springs
,
Compliant mechanisms
A Novel Compliant Mechanism for Converting Reciprocating Translation Into Enclosing Curved Paths
J. Mech. Des. July 2004, 126(4): 667–672.
doi: https://doi.org/10.1115/1.1759360
Topics:
Compliant mechanisms
,
Deformation
,
Design
,
Engineering prototypes
,
Finite element analysis
,
Gates (Closures)
,
Kinematics
,
Stress
,
Simulation
,
Testing
Infinitely Variable Transmission of Racheting Drive Type Based on One-Way Clutches
J. Mech. Des. July 2004, 126(4): 673–682.
doi: https://doi.org/10.1115/1.1758258
Topics:
Engineering prototypes
,
Gears
,
Torque
,
Kinematics
,
Computer simulation
A New Cycloid Drive With High-Load Capacity and High Efficiency
J. Mech. Des. July 2004, 126(4): 683–686.
doi: https://doi.org/10.1115/1.1758254
Topics:
Bearings
,
Design
,
Gears
,
Stress
,
Torque
,
Testing
,
Plates (structures)
,
Engineering prototypes
Multi-Objective Optimization of the Handling Performances of a Road Vehicle: A Fundamental Study on Tire Selection
J. Mech. Des. July 2004, 126(4): 687–702.
doi: https://doi.org/10.1115/1.1759359
Topics:
Design
,
Motor vehicles
,
Optimization
,
Tires
,
Vehicles
,
Pareto optimization
,
Yaw
,
Stiffness
Injection System Design Optimization by Considering Fuel Spray Characteristics
J. Mech. Des. July 2004, 126(4): 703–710.
doi: https://doi.org/10.1115/1.1758248
Topics:
Design
,
Fuels
,
Sprays
,
Optimization
,
Engines
Analysis, Design, and Modeling of a Rotary Vane Engine (RVE)
J. Mech. Des. July 2004, 126(4): 711–720.
doi: https://doi.org/10.1115/1.1711823
Topics:
Design
,
Engines
,
Flywheels
,
Friction
,
Gears
,
Torque
,
Combustion
,
Inertia (Mechanics)
,
Modeling
,
Dynamics (Mechanics)
New Analytical Model of Bolted Joints
J. Mech. Des. July 2004, 126(4): 721–728.
doi: https://doi.org/10.1115/1.1760777
Topics:
Finite element analysis
,
Stiffness
,
Stress
,
Bolted joints
,
Deformation
,
Rotation
,
Compression
Torque and Angle Controlled Tightening Over the Yield Point of a Screw—Based on Monte-Carlo Simulations
J. Mech. Des. July 2004, 126(4): 729–736.
doi: https://doi.org/10.1115/1.1701877
Topics:
Screws
,
Torque
,
Simulation
,
Yield point
,
Elongation
,
Engineering simulation
A General Formulation for Designing Interference-Fit Joints With Elastic-Plastic Components
J. Mech. Des. July 2004, 126(4): 737–743.
doi: https://doi.org/10.1115/1.1758247
Topics:
Design
,
Finite element model
,
Press fits
,
Stress
Technical Briefs
New Pneumatic Cylinders for Improving Servo Actuator Positioning Accuracy
J. Mech. Des. July 2004, 126(4): 744–747.
doi: https://doi.org/10.1115/1.1737380
Topics:
Pneumatic cylinders
,
Servomechanisms
,
Friction
,
Actuators
Contribution of Gear Body to Tooth Deflections—A New Bidimensional Analytical Formula
J. Mech. Des. July 2004, 126(4): 748–752.
doi: https://doi.org/10.1115/1.1758252
Topics:
Deflection
,
Gears
,
Stress
,
Finite element model
,
Displacement
,
Finite element analysis
Transformation of an EGT Grammar: New Grammar, New Designs
J. Mech. Des. July 2004, 126(4): 753–756.
doi: https://doi.org/10.1115/1.1758256
Topics:
Design
,
Planetary gears
,
Trains
,
Gears
A Study of Displacement Distribution in a Piezoelectric Heterogeneous Bimorph
J. Mech. Des. July 2004, 126(4): 757–762.
doi: https://doi.org/10.1115/1.1759362
Topics:
Deflection
,
Design
,
Displacement
,
Finite element model
,
Geometry
,
Steel
,
Stress
,
Metals
,
Elastic moduli
,
Electric fields
Book Reviews
Robots and Screw Theory: Applications of Kinematics and Statics to Robotics
J. Mech. Des. July 2004, 126(4): 763–764.
doi: https://doi.org/10.1115/1.1775805
Topics:
Kinematics
,
Robotics
,
Robots
,
Screws
,
Statics
Email alerts
RSS Feeds
Tolerancing for an Apple Pie: A Fundamental Theory of Tolerances
J. Mech. Des (June 2023)
What Do We Mean When We Write About Ethics, Equity, and Justice in Engineering Design?
J. Mech. Des (June 2023)
Stability Analysis and Distortion Compensation of Robot Structure Dynamics for a Hybrid Simulator
J. Mech. Des (July 2023)
Greetings from the New Editor
J. Mech. Des