Abstract
Cable-driven parallel robots (CDPRs) have been widely used in engineering fields because of their significant advantages including high load-bearing capacity, large workspace, and low inertia. However, the impact of convergence speed and solution accuracy of optimization approaches on optimal performances can become a key issue when it comes to the optimal design of CDPR applied to large storage space. An adaptive adjustment inertia weight particle swarm optimization (AAIWPSO) algorithm is proposed for the multi-objective optimal design of CDPR. The kinematic and static models of CDPR are established based on the principle of virtual work. Subsequently, two performance indices including workspace and dexterity are derived. A multi-objective optimization model is established based on performance indices. The AAIWPSO algorithm introduces an adaptive adjustment inertia weight to improve the convergence efficiency and accuracy of traditional particle swarm optimization (PSO) algorithm. Numerical examples demonstrate that final convergence values of the objective function by the AAIWPSO algorithm can almost be 14∼20% and 19∼40% higher than those by the PSO algorithm and genetic algorithm (GA) for the optimal design of CDPR with different configurations and masses of end-effectors, respectively.
References
1.
Zhang
, Z. K.
, Shao
, Z. F.
, You
, Z.
, Tang
, X. Q.
, Zi
, B.
, Yang
, G. L.
, Gosslin
, C.
, and Caro
, S.
, 2022
, “State-of-the-Art on Theories and Applications of Cable-Driven Parallel Robots
,” Front. Mech. Eng.
, 17
(3
), p. 37
. 2.
Zhang
, B.
, Shang
, W. W.
, Cong
, S.
, and Li
, Z. J.
, 2020
, “Coordinated Dynamic Control in the Task Space for Redundantly Actuated Cable-Driven Parallel Robots
,” IEEE/ASME Trans. Mechatron.
, 26
(5
), pp. 2396
–2407
. 3.
Sancak
, C.
, and Itik
, M.
, 2021
, “Out-of-Plane Vibration Suppression and Position Control of a Planar Cable-Driven Robot
,” IEEE/ASME Trans. Mechatron.
, 27
(3
), pp. 1311
–1320
. 4.
Paez-Granados
, D. F.
, Kadone
, H.
, Hassan
, M.
, Chen
, Y.
, and Suzuki
, K.
, 2022
, “Personal Mobility With Synchronous Trunk–Knee Passive Exoskeleton: Optimizing Human–Robot Energy Transfer
,” IEEE/ASME Trans. Mechatron.
, 27
(5
), pp. 3613
–3623
. 5.
Duan
, J. H.
, Shao
, Z. F.
, Zhang
, Z. K.
, and Peng
, F. Z.
, 2022
, “Performance Simulation and Energetic Analysis of TBot High-Speed Cable-Driven Parallel Robot
,” ASME J. Mech. Rob.
, 14
(2
), p. 024504
. 6.
Carbonari
, L.
, Callegari
, M.
, Palmieri
, G.
, and Palpacelli
, M. C.
, 2014
, “Analysis of Kinematics and Reconfigurability of a Spherical Parallel Manipulator
,” IEEE Trans. Robot.
, 30
(6
), pp. 1541
–1547
. 7.
Cuvillon
, L.
, Weber
, X.
, and Gangloff
, J.
, 2020
, “Modal Control for Active Vibration Damping of Cable-Driven Parallel Robots
,” ASME J. Mech. Rob.
, 12
(5
), p. 051004
. 8.
Hussein
, H.
, Santos
, J. C.
, and Gouttefarde
, M.
, 2018
, “Geometric Optimization of a Large Scale CDPR Operating on a Building Façade
,” Proceedings of the 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
, Madrid, Spain
, Oct. 1–5
, pp. 5117
–5124
.9.
Wang
, Y. X.
, and Xu
, Q. S.
, 2021
, “Design and Testing of a Soft Parallel Robot Based on Pneumatic Artificial Muscles for Wrist Rehabilitation
,” Sci. Rep.
, 11
(1
), p. 1273
. 10.
Mamidi
, T. K.
, and Bandyopadhyay
, S.
, 2021
, “Forward Dynamic Analyses of Cable-Driven Parallel Robots With Constant Input With Applications to Their Kinetostatic Problems
,” Mech. Mach. Theory
, 163
, p. 104381
. 11.
Fabritius
, M.
, Martin
, C.
, and Pott
, A.
, 2018
, “Calculation of the Collision-Free Printing Workspace for Fully-Constrained Cable-Driven Parallel Robots
,” Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
, Quebec City, Canada
, Aug. 26–29
, p. 51814
, V05BT07A046.12.
Liu
, H. T.
, Huang
, T.
, Chetwynd
, D. G.
, and Kecskemethy
, A.
, 2017
, “Stiffness Modeling of Parallel Mechanisms at Limb and Joint/Link Levels
,” IEEE Trans. Robot.
, 33
(3
), pp. 734
–741
. 13.
Jiang
, Q. M.
, and Gosselin
, C. M.
, 2008
, “Singularity Equations of Gough–Stewart Platforms Using a Minimal Set of Geometric Parameters
,” ASME J. Mech. Des.
, 130
(11
), p. 112303
. 14.
Gao
, C. Q.
, Huang
, H. L.
, Li
, Y.
, and Bing
, L.
, 2022
, “Design and Analysis of a Three-Fingered Deployable Metamorphic Robotic Grasper
,” ASME J. Mech. Des.
, 144
(8
), p. 083302
. 15.
Wu
, C.
, Liu
, X. J.
, Wang
, L. P.
, and Wang
, J. S.
, 2010
, “Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility
,” ASME J. Mech. Des.
, 132
(3
), p. 031002
. 16.
Gao
, H. B.
, Sun
, G. Y.
, Liu
, Z.
, Sun
, C.
, Li
, N.
, Ding
, L.
, Yu
, H. T.
, and Deng
, Z. Q.
, 2022
, “Tension Distribution Algorithm Based on Graphics With High Computational Efficiency and Robust Optimization for Two-Redundant Cable-Driven Parallel Robots
,” Mech. Mach. Theory
, 172
, p. 104739
. 17.
Zhang
, W. X.
, Zhang
, W.
, Ding
, X. L.
, and Sun
, L.
, 2020
, “Optimization of the Rotational Asymmetric Parallel Mechanism for Hip Rehabilitation With Force Transmission Factors
,” ASME J. Mech. Rob.
, 12
(4
), p. 041006
. 18.
Gueners
, D.
, Chanal
, H.
, and Bouzgarrou
, B. C.
, 2020
, “Stiffness Optimization of a Cable Driven Parallel Robot for Additive Manufacturing
,” 2020 IEEE International Conference on Robotics and Automation (ICRA)
, Paris, France
, May 31–Aug. 31
, IEEE
, pp. 843
–849
.19.
Sun
, C.
, Gao
, H. B.
, Liu
, Z.
, Xiang
, S.
, Yu
, H. T.
, Li
, N.
, and Deng
, Z. Q.
, 2021
, “Design and Optimization of Three-Degree-of-Freedom Planar Adaptive Cable-Driven Parallel Robots Using the Cable Wrapping Phenomenon
,” Mech. Mach. Theory
, 166
, p. 104475
. 20.
Brahmi
, B.
, Ahmed
, T.
, Elbojairami
, I. E.
, Swapnil
, A. A. Z.
, Zaman
, M. A. U.
, Schultz
, K.
, McGonigle
, E.
, and Rahman
, M. H.
, 2021
, “Flatness Based Control of a Novel Smart Exoskeleton Robot
,” IEEE/ASME Trans. Mechatron.
, 27
(2
), pp. 974
–984
. 21.
Zhang
, Z. K.
, Shao
, Z. F.
, and Wang
, L. P.
, 2020
, “Optimization and Implementation of a High-Speed 3-DOFs Translational Cable-Driven Parallel Robot
,” Mech. Mach. Theory
, 145
, p. 103693
. 22.
Song
, C.
, and Lau
, D. W.
, 2022
, “Workspace-Based Model Predictive Control for Cable-Driven Robots
,” IEEE Trans. Robot.
, 38
(4
), pp. 2577
–2596
. 23.
Jamshidifar
, H.
, Khajepour
, A.
, and Korayem
, A. H.
, 2021
, “Wrench Feasibility and Workspace Expansion of Planar Cable-Driven Parallel Robots by a Novel Passive Counterbalancing Mechanism
,” IEEE Trans. Robot.
, 37
(3
), pp. 935
–947
. 24.
Gao
, J.
, Zhou
, B.
, Zi
, B.
, Qian
, S.
, and Zhao
, P.
, 2022
, “Kinematic Uncertainty Analysis of a Cable-Driven Parallel Robot Based on an Error Transfer Model
,” ASME J. Mech. Rob.
, 14
(5
), p. 051008
. 25.
Viegas
, C.
, Daney
, D.
, Tavakoli
, M.
, and Almeida
, A. T.
, 2017
, “Performance Analysis and Design of Parallel Kinematic Machines Using Interval Analysis
,” Mech. Mach. Theory
, 115
, pp. 218
–236
. 26.
Zhou
, B.
, Zi
, B.
, and Qian
, S.
, 2017
, “Dynamics-Based Nonsingular Interval Model and Luffing Angular Response Field Analysis of the DACS With Narrowly Bounded Uncertainty
,” Nonlinear Dyn.
, 90
(4
), pp. 2599
–2626
. 27.
Zhang
, X. B.
, Lu
, Z. Z.
, and Cheng
, K.
, 2021
, “Reliability Index Function Approximation Based on Adaptive Double-Loop Kriging for Reliability-Based Design Optimization
,” Reliab. Eng. Syst. Saf.
, 216
, p. 108020
. 28.
Wang
, Z. L.
, Zhao
, D. Y.
, and Guan
, Y.
, 2023
, “Flexible-Constrained Time-Variant Hybrid Reliability-Based Design Optimization
,” Struct. Multidiscipl. Optim.
, 66
(4
), pp. 1
–14
. 29.
Yang
, C.
, Ye
, W.
, and Li
, Q. C.
, 2022
, “Review of the Performance Optimization of Parallel Manipulators
,” Mech. Mach. Theory
, 170
, p. 104725
. 30.
Chen
, Y.
, Yan
, J. Y.
, Feng
, J.
, and Sareh
, P.
, 2021
, “Particle Swarm Optimization-Based Metaheuristic Design Generation of Non-Trivial Flat-Foldable Origami Tessellations With Degree-4 Vertices
,” ASME J. Mech. Des.
, 143
(1
), p. 011703
. 31.
Chu
, S.
, Xiao
, M.
, Gao
, L.
, Zhang
, Y.
, and Zhang
, J. H.
, 2021
, “Robust Topology Optimization for Fiber-Reinforced Composite Structures Under Loading Uncertainty
,” Comput. Methods Appl. Mech. Eng.
, 384
, p. 113935
. 32.
Zhou
, Q.
, Guo
, S. J.
, Xu
, L.
, Gao
, X. X.
, Williams
, H.
, Xu
, H. M.
, and Yan
, F. W.
, 2021
, “Global Optimization of the Hydraulic-Electromagnetic Energy-Harvesting Shock Absorber for Road Vehicles With Human-Knowledge-Integrated Particle Swarm Optimization Scheme
,” IEEE/ASME Trans. Mechatron.
, 26
(3
), pp. 1225
–1235
. 33.
Meng
, Q. Z.
, Xie
, F. G.
, Liu
, X. J.
, and Takeda
, Y. K.
, 2020
, “Screw Theory-Based Motion/Force Transmissibility Analysis of High-Speed Parallel Robots With Articulated Platforms
,” ASME J. Mech. Rob.
, 12
(4
), p. 041011
. 34.
Zhang
, D.
, and Wei
, B.
, 2017
, “Modelling and Optimisation of a 4-DOF Hybrid Robotic Manipulator
,” Int. J. Comput. Integr. Manuf.
, 30
(11
), pp. 1179
–1189
. 35.
Hamida
, I. B.
, Laribi
, M. A.
, Mlika
, A.
, Loft
, R.
, Zeghloul
, S.
, and Carbone
, G.
, 2021
, “Multi-Objective Optimal Design of a Cable Driven Parallel Robot for Rehabilitation Tasks
,” Mech. Mach. Theory
, 156
, p. 104141
. 36.
Zhang
, Z. K.
, Shao
, Z. F.
, Peng
, F. Z.
, Li
, H. S.
, and Wang
, L. P.
, 2020
, “Workspace Analysis and Optimal Design of a Translational Cable-Driven Parallel Robot With Passive Springs
,” ASME J. Mech. Rob.
, 12
(5
), p. 051005
. 37.
Hu
, B.
, 2016
, “Kinematically Identical Manipulators for the Exechon Parallel Manipulator and Their Comparison Study
,” Mech. Mach. Theory
, 103
, pp. 117
–137
. 38.
Martin-Parra
, A.
, Juarez-Perez
, S.
, Gonzalez-Rodriguez
, A.
, Gonzalez-Rodriguez
, A. G.
, Lopez-Diaz
, A. I.
, and Rubio-Gomez
, G.
, 2023
, “A Novel Design for Fully Constrained Planar Cable-Driven Parallel Robots to Increase Their Wrench-Feasible Workspace
,” Mech. Mach. Theory
, 180
, p. 105159
. 39.
Wang
, J.
, and Lau
, H. Y. K.
, 2021
, “Dexterity Analysis Based on Jacobian and Performance Optimization for Multi-Segment Continuum Robots
,” ASME J. Mech. Rob.
, 13
(6
), p. 061012
. 40.
Brauers
, W. K. M.
, and Zavadskas
, E. K.
, 2012
, “Robustness of MULTIMOORA: A Method for Multi-Objective Optimization
,” Informatica
, 23
(1
), pp. 1
–25
. 41.
Xiong
, H.
, Cao
, H. H.
, Zeng
, W. F.
, Huang
, J. C.
, Diao
, X. M.
, Lu
, W. J.
, and Lou
, Y. J.
, 2022
, “Real-Time Reconfiguration Planning for the Dynamic Control of Reconfigurable Cable-Driven Parallel Robots
,” ASME J. Mech. Rob.
, 14
(6
), p. 060913
. 42.
Syamlan
, A. T.
, Nurahmi
, L.
, Tamara
, M. N.
, and Pramujati
, B.
, 2020
, “Dynamic Trajectory Planning of Reconfigurable Suspended Cable Robot
,” Int. J. Dyn. Control
, 8
, pp. 887
–897
. Copyright © 2023 by ASME
You do not currently have access to this content.
