A beveloid gear can be viewed as an involute gear of which the profile-shifted coefficient linearly decreases from the heel to the toe. Therefore, tooth undercutting occurs and singular points appear on the tooth surfaces near the toe. When undercutting occurs, the gear tooth is comparatively weak. In this study, the conditions of tooth undercutting of beveloid gears were derived and specific phenomena were also investigated by numerical illustrated examples. In addition, according to the characteristics of tooth undercutting on the beveloid gear tooth surface, two practicable methods were also proposed to avoid the tooth undercutting of beveloid gears.
Issue Section:
Technical Papers
1.
Merrit, H. E., 1954, “Conical Involute Gears,” Gears, 3rd. ed., Issac Pitman and Sons, London, pp. 165–170.
2.
Beam
, A. S.
, 1954
, “Beveloid Gearing
,” Mach. Des.
, 26
, No. 12
, pp. 220
–238
.3.
Mitome
, K.
, 1981a
, “Table Sliding Taper Hobbing of Conical Gear Using Cylindrical Hob, Part 1: Theoretical Analysis of Table Sliding Taper Hobbing
,” ASME J. Eng. Ind.
, 103
, pp. 446
–451
.4.
Mitome
, K.
, 1981b
, “Table Sliding Taper Hobbing of Conical Gear Using Cylindrical Hob, Part 2: Hobbing of Conical Involute Gear
,” ASME J. Eng. Ind.
, 103
, pp. 452
–455
.5.
Mitome
, K.
, 1983
, “Conical Involute Gear, Part1: Design and Production System
,” Bull. JSME
, 26
, No. 212
, pp. 299
–305
.6.
Mitome
, K.
, 1985
, “Conical Involute Gear, Part 3: Tooth Action of a Pair of Gears
,” Bull. JSME
, 28
, No. 245
, pp. 2757
–2764
.7.
Mitome
, K.
, 1986
, “Inclining Work-Arbor Taper Hobbing of Conical Gear Using Cylindrical Hob
,” ASME J. Mech. Des.
, 108
, pp. 135
–141
.8.
Mitome
, K.
, 1991
, “Conical Involute Gear (Design of Nonintersecting-Nonparallel-Axis Conical Involute Gear)
,” JSME Int. J., Ser. III
, 34
, No. 2
, pp. 265
–270
.9.
Mitome
, K.
, 1993
, “Infeed Grinding of Straight Conical Involute Gear
,” JSME Int. J., Ser. C
, 36
, No. 4
, pp. 537
–542
.10.
Mitome
, K.
, 1995
, “Design of Miter Conical Involute Gears Based on Tooth Bearing
,” JSME Int. J., Ser C
, 38
, No. 2
, pp. 307
–311
.11.
Mitome
, K.
, Gotou
, T.
, and Ueda
, T.
, 1998
, “Tooth surface measurement of conical involute gears by CNC gear-measuring machine
,” ASME J. Mech. Des.
, 120
, pp. 358
–363
.12.
Litvin, F. L., 1989, Theory of Gearing, NASA Publication RP-1212, Washington D.C.
13.
Litvin, F. L., 1994, Gear Geometry and Applied Theory, Prentice Hall, New Jersey.
Copyright © 2001
by ASME
You do not currently have access to this content.