Laser welding of advanced high strength steels for fabrication of tailor welded blanks is of increasing interest for continued improvements in vehicle performance and safety without an increase in weight. Experimental results have shown that formability of welded dual-phase (DP) steels is significantly reduced by the formation of a softened region in the heat-affected zone (HAZ). In this study, a finite element simulation of welded DP980 samples undergoing transverse uniaxial tensile testing was used to evaluate the effects of soft zone width and strength on formability characteristics. Both the strength and the ductility of laser welded blanks decreased compared with those of unwelded blanks due to the formation of a softened outer-HAZ, where strain localization and final fracture occurred during tensile testing. The magnitude of softening and the width of the HAZ depend on the laser specific energy. It was observed from tensile test experiments and numerical simulations that both a decrease in strength and an increase in width of the softened HAZ were responsible for a decrease in the overall strength and ductility of the welded blanks.
Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels
- Views Icon Views
- Share Icon Share
- Search Site
Panda, S. K., Sreenivasan, N., Kuntz, M. L., and Zhou, Y. (August 26, 2008). "Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels." ASME. J. Eng. Mater. Technol. October 2008; 130(4): 041003. https://doi.org/10.1115/1.2969256
Download citation file: