... for the well-known mechanistic turning force model is provided. The discrete grid method is presented, and updating is performed using force data from the Assessment of Machining Models study completed by the National Institute of Standards and Technology. decision making turning (machining...

... thermomechanical treatment turning (machining) hard turning chip morphology cutting parameters tool geometry finite element simulation Saw-tooth chip commonly occurs in machining difficult-to-cut materials such as bearing steel, titanium alloy, and die steel. Saw-tooth chip formation can...

... , Oxford University Press , Oxford . 17 03 2010 29 03 2011 01 07 2011 01 07 2011 crystallographic shear cutting micromachining nanofabrication plasticity shearing turning (machining) work hardening micromachining crystallographic anisotropy rate-sensitive...

... sensitivity. This second part of the work is devoted to calibration and validation of the model using experimental data. crystallography cutting friction hardening micromachining plasticity production testing turning (machining) 17 03 2010 29 03 2011 01 07 2011 01 07...

... ). rolling bearings shear modulus turning (machining) 02 12 2008 27 06 2010 14 10 2010 14 10 2010 2010 American Society of Mechanical Engineers ...

... turning (machining) Gradual tool wear prediction has been typically approached using empirical models. The applicability of the empirical models such as Taylor’s equation ( 1 ) is very limited especially when the performance of a new tool on a potential work material is needed. Physics-based...

... monitoring drilling grinding inspection maintenance engineering milling quality control turning (machining) Global demands for improved quality, reduced downtime, lower production costs, and overall improved systems and production line control are driving the need for improved production...

... of the friction and increases the hardness. 30 04 2009 11 05 2010 23 07 2010 23 07 2010 alloy steel coatings cutting cutting tools dynamometers machine tools turning (machining) cutting forces specific cutting forces steels threading threading grades Threads...

... process control turning (machining) wear 18 05 2009 08 02 2010 01 04 2010 01 04 2010 2010 American Society of Mechanical Engineers ...

..., and broaching cutting (BC) test. Nanotech 350FG freeform generator and the axis arrangement The machining reported in this paper was performed on a 350FG freeform generator (Fig. 3 ), an ultraprecision diamond turning machine with three linear axes. The diamond turning machine is also capable...

... compounds turning (machining) Weibull distribution machining green manufacturing tool life finish turning Recently there has been increasing concern about environmental consideration in manufacturing ( 1 2 3 ). Green manufacturing, in particular, and green engineering, in general, have...

... turning (machining) vibration control wear Surface texturing technology has recently been explored in the tribology community as a method for improving friction and lubrication performance of various mechanical components. Several researchers showed the potential benefits of modifying...

... will be identical to the Eqs. 10 , 11 but with an opposite sign. 29 07 2008 27 04 2009 08 07 2009 cutting cutting tools damping machine tool spindles machining chatter mechanical stability turning (machining) vibrations chatter turning stability The productivity...

... precision engineering stress measurement tensile strength turning (machining) wear X-ray diffraction residual stress hard turning grinding white layer Many researches have been conducted over the years to study the residual stress generated in steels by hard turning and grinding. The most...

...) turning (machining) 09 02 2008 08 08 2008 10 10 2008 The finite element model was built by importing a 3D solid model into ANSYS ® 11.0 . The solid model was an assembly of both the ring and a section of the chuck jaws, as shown in Fig. 10 . All solid model volumes were...

... cutting tools ductility iron quenching (thermal) surface roughness turning (machining) wear austempered ductile iron tool wear cutting forces surface roughness CBN machinability Austempered ductile iron (ADI) has recently been developed for an increasing number of the engineering...

... that was used for machining to submicrometer levels. The significant error sources identified in the machining process were thermal effects and deflections of the structural loop of the diamond turning machine (DTM) that led to registration errors of the cutting tool between consecutive passes. Environmental...

... milling and turning operations, was investigated. The machining of cylindrical parts on a mill/turn machine was considered. A new algorithm for choosing the best axis from a feasible axis set and for determining the machining volumes for the turning operations based on machining cost and part geometry...

... coatings turning (machining) design engineering High cutting speeds and feedrates required for increased machining productivity on often difficult-to-machine workpiece materials are placing increasing demands on carbide tools. Intensive development of coated WC-Co cutting tools has been ongoing...

.... Chatter experiments are conducted for both turning and boring in order to verify the model predictions, and overall, an acceptable agreement is observed. 01 06 2006 14 03 2007 machining chatter turning (machining) eigenvalues and eigenfunctions boring chatter insert nose radius...