Journal of Engineering for Industry

Skip Nav Destination

Volume 99, Issue 3

August 1977

This article was originally published in

ISSN 0022-0817

Research Papers

Shape and Frequency Composition of Pulses From an Impact Pair

R. G. Herbert, D. C. McWhannell

J. Eng. Ind. August 1977, 99(3): 513–518. doi: https://doi.org/10.1115/1.3439270

Abstract

View articletitled, Shape and Frequency Composition of Pulses From an Impact Pair

Open the PDF for in another window

Topics: Articulated systems , Damping , Emissions , Noise (Sound) , Reliability , Shapes , Stiffness

Tool-Life Distributions—Part 1: Single-Injury Tool-Life Model

S. Ramalingam, J. D. Watson

J. Eng. Ind. August 1977, 99(3): 519–522. doi: https://doi.org/10.1115/1.3439271

Abstract

View articletitled, Tool-Life Distributions—Part 1: Single-Injury Tool-Life Model

Open the PDF for in another window

Topics: Wounds , Design , Electromagnetic scattering , Failure , Machining , Manufacturing systems , Service life (Equipment)

Tool-Life Distributions—Part 2: Multiple-Injury Tool-Life Model

S. Ramalingam

J. Eng. Ind. August 1977, 99(3): 523–528. doi: https://doi.org/10.1115/1.3439272

Abstract

View articletitled, Tool-Life Distributions—Part 2: Multiple-Injury Tool-Life Model

Open the PDF for in another window

Topics: Wounds , Wear , Failure , Hazards

Synthesis of a Six-Link Spatial Mechanism via Screw Triangle Geometry, Successive Screw Displacements, and Pair Geometry Constraints

D. Kohli, A. H. Soni

J. Eng. Ind. August 1977, 99(3): 532–538. doi: https://doi.org/10.1115/1.3439275

Abstract

View articletitled, Synthesis of a Six-Link Spatial Mechanism via Screw Triangle Geometry, Successive Screw Displacements, and Pair Geometry Constraints

Open the PDF for in another window

Topics: Geometry , Screws , Circuits , Displacement , Kinematics

Optimum Design of a Complex Planar Mechanism

W. Mariante, K. D. Willmert

J. Eng. Ind. August 1977, 99(3): 539–546. doi: https://doi.org/10.1115/1.3439276

Abstract

View articletitled, Optimum Design of a Complex Planar Mechanism

Open the PDF for in another window

Topics: Design , Automobiles , Optimization , Chain , Computers , Linkages

A Dependable Method for Solving Matrix Loop Equations for the General Three-Dimensional Mechanism

A. S. Hall, Jr., R. R. Root, E. Sandgren

J. Eng. Ind. August 1977, 99(3): 547–550. doi: https://doi.org/10.1115/1.3439277

Abstract

View articletitled, A Dependable Method for Solving Matrix Loop Equations for the General Three-Dimensional Mechanism

Open the PDF for in another window

Topics: Linkages , Newton's method , Optimization

Optimization of Helium Refrigerators for Superconducting Power Transmission Lines in Terms of Cost and Reliability

F. J. Kadi, R. C. Longsworth

J. Eng. Ind. August 1977, 99(3): 551–557. doi: https://doi.org/10.1115/1.3439278

Abstract

View articletitled, Optimization of Helium Refrigerators for Superconducting Power Transmission Lines in Terms of Cost and Reliability

Open the PDF for in another window

Topics: Helium , Optimization , Reliability , Transmission lines , Compressors , Nitrogen

A Method for Optimal Tolerance Selection

P. F. Ostwald, J. Huang

J. Eng. Ind. August 1977, 99(3): 558–565. doi: https://doi.org/10.1115/1.3439279

Abstract

View articletitled, A Method for Optimal Tolerance Selection

Open the PDF for in another window

Topics: Algorithms , Design , Manufacturing , Optimization , Probability , Relaxation (Physics)

Influence of Flank Wear on the Stresses in a Cutting Tool

H. Chandrasekaran, R. Nagarajan

J. Eng. Ind. August 1977, 99(3): 566–577. doi: https://doi.org/10.1115/1.3439280

Abstract

View articletitled, Influence of Flank Wear on the Stresses in a Cutting Tool

Open the PDF for in another window

Topics: Cutting tools , Stress , Wear , Brittleness , Cutting , Epoxy adhesives , Epoxy resins , Machining , Structural mechanics , Transparency

Tool Life Variation and Its Influence on the Development of Tool Life Models

R. E. DeVor, D. L. Anderson, W. J. Zdeblick

J. Eng. Ind. August 1977, 99(3): 578–584. doi: https://doi.org/10.1115/1.3439281

Abstract

View articletitled, Tool Life Variation and Its Influence on the Development of Tool Life Models

Open the PDF for in another window

Topics: Clearances (Engineering) , Cutting , Optimization , Turning , Wear

A New Approach to the Analysis of Machine-Tool System Stability Under Working Conditions

F. A. Burney, S. M. Pandit, S. M. Wu

J. Eng. Ind. August 1977, 99(3): 585–590. doi: https://doi.org/10.1115/1.3439282

Abstract

View articletitled, A New Approach to the Analysis of Machine-Tool System Stability Under Working Conditions

Open the PDF for in another window

Topics: Machine tools , Stability , Cutting , Milling , Chatter , Displacement , Milling machines , Signals , Static stability , Vibration

Graphical Solution of the Branch and Order Problems of Linkage Synthesis for Multiply Separated Positions

K. J. Waldron

J. Eng. Ind. August 1977, 99(3): 591–597. doi: https://doi.org/10.1115/1.3439283

Abstract

View articletitled, Graphical Solution of the Branch and Order Problems of Linkage Synthesis for Multiply Separated Positions

Open the PDF for in another window

Topics: Linkages

Dynamic Response of a Cam-Actuated Mechanism With Pneumatic Coupling

F. Y. Chen

J. Eng. Ind. August 1977, 99(3): 598–603. doi: https://doi.org/10.1115/1.3439284

Abstract

View articletitled, Dynamic Response of a Cam-Actuated Mechanism With Pneumatic Coupling

Open the PDF for in another window

Topics: Dynamic response , Stability

Elastodynamic Analysis of a Completely Elastic System

D. Kohli, D. Hunter, G. N. Sandor

J. Eng. Ind. August 1977, 99(3): 604–609. doi: https://doi.org/10.1115/1.3439285

Abstract

View articletitled, Elastodynamic Analysis of a Completely Elastic System

Open the PDF for in another window

Topics: Approximation , Deformation , Differential equations , Equations of motion , Fourier series , Inertia (Mechanics) , Vibration , Vibration analysis

Computerized Synthesis of Straight-Line Four-Bar Linkages From Inflection Circle Properties

J. M. Simo´n

J. Eng. Ind. August 1977, 99(3): 610–614. doi: https://doi.org/10.1115/1.3439286

Abstract

View articletitled, Computerized Synthesis of Straight-Line Four-Bar Linkages From Inflection Circle Properties

Open the PDF for in another window

Topics: Linkages , Computers

On the Drawability of Sheet Metal in Noncircular Cups

T. C. Hsu, S. Y. Lee

J. Eng. Ind. August 1977, 99(3): 615–619. doi: https://doi.org/10.1115/1.3439287

Abstract

View articletitled, On the Drawability of Sheet Metal in Noncircular Cups

Open the PDF for in another window

Topics: Sheet metal , Blanks , Shapes

Design of a Viscoelastic Dynamic Absorber for Machine Tool Applications

G. L. Nessler, D. L. Brown, D. C. Stouffer, K. C. Maddox

J. Eng. Ind. August 1977, 99(3): 620–623. doi: https://doi.org/10.1115/1.3439288

Abstract

View articletitled, Design of a Viscoelastic Dynamic Absorber for Machine Tool Applications

Open the PDF for in another window

Topics: Design , Machine tools , Approximation , Boundary-value problems , Chatter , Compression , Mechanical properties , Shapes , Temperature , Viscoelasticity

On the Solution of Three-Dimensional Metal-Forming Processes

V. Nagpal

J. Eng. Ind. August 1977, 99(3): 624–629. doi: https://doi.org/10.1115/1.3439289

Abstract

View articletitled, On the Solution of Three-Dimensional Metal-Forming Processes

Open the PDF for in another window

Topics: Metalworking , Extruding , Forging , Shapes

Existence Criteria of Two-Loop Six-Link R-R-C-C-R-C-C Spatial Mechanism

R. V. Dukkipati, A. H. Soni, P. R. Pamidi

J. Eng. Ind. August 1977, 99(3): 630–636. doi: https://doi.org/10.1115/1.3439290

Abstract

View articletitled, Existence Criteria of Two-Loop Six-Link R-R-C-C-R-C-C Spatial Mechanism

Open the PDF for in another window

Topics: Geometry

A Regenerative Compressor

H. Sixsmith, H. Altmann

J. Eng. Ind. August 1977, 99(3): 637–647. doi: https://doi.org/10.1115/1.3439291

Abstract

View articletitled, A Regenerative Compressor

Open the PDF for in another window

Topics: Compressors , Flow (Dynamics) , Pressure , Blades , Design , Impellers , Rotors

On the Elastokinematics of the Involute Gear Pair

J. D. C. Crisp, B. Rebbechi

J. Eng. Ind. August 1977, 99(3): 648–655. doi: https://doi.org/10.1115/1.3439292

Abstract

View articletitled, On the Elastokinematics of the Involute Gear Pair

Open the PDF for in another window

Topics: Chain , Displacement , Elasticity , Gears , Mechanical admittance , Spur gears

A Two-Path Variable-Ratio Transmission With an Extended Range of Ratios

G. White

J. Eng. Ind. August 1977, 99(3): 656–661. doi: https://doi.org/10.1115/1.3439293

Abstract

View articletitled, A Two-Path Variable-Ratio Transmission With an Extended Range of Ratios

Open the PDF for in another window

Topics: Gear trains , Torque

On Cage-Plane Motion

O. Bottema, G. R. Veldkamp

J. Eng. Ind. August 1977, 99(3): 662–664. doi: https://doi.org/10.1115/1.3439294

Abstract

View articletitled, On Cage-Plane Motion

Open the PDF for in another window

Topics: Rolling contact

A Numerical Method for the Dynamic Analysis of Mechanical Systems in Impact

R. E. Beckett, K. C. Pan, S. C. Chu

J. Eng. Ind. August 1977, 99(3): 665–673. doi: https://doi.org/10.1115/1.3439295

Abstract

View articletitled, A Numerical Method for the Dynamic Analysis of Mechanical Systems in Impact

Open the PDF for in another window

Topics: Displacement , Dynamic analysis , Equations of motion , Hamilton's principle , Numerical analysis , Separation (Technology)

Gross Motion Analysis of Planar Linkages With Application to a Geared Five-Bar

A. F. Vadasz, A. H. Soni

J. Eng. Ind. August 1977, 99(3): 674–677. doi: https://doi.org/10.1115/1.3439296

Abstract

View articletitled, Gross Motion Analysis of Planar Linkages With Application to a Geared Five-Bar

Open the PDF for in another window

Topics: Linkages , Polynomials , Gears

Fluid Delivery and Metering for Reaction-Injection Molding

C. L. Tucker, III, N. P. Suh

J. Eng. Ind. August 1977, 99(3): 678–681. doi: https://doi.org/10.1115/1.3439297

Abstract

View articletitled, Fluid Delivery and Metering for Reaction-Injection Molding

Open the PDF for in another window

Topics: Fluids , Molding , Errors , Energy consumption , Machinery

Investigation of Surface Temperature in Electro-Discharge Machining

C. C. Marty

J. Eng. Ind. August 1977, 99(3): 682–684. doi: https://doi.org/10.1115/1.3439298

Abstract

View articletitled, Investigation of Surface Temperature in Electro-Discharge Machining

Open the PDF for in another window

Topics: Machining , Temperature , Heat , Heat conduction , Phase transition temperature , Surfaces (Materials)

Hydroforming Process for Uniform Wall Thickness Products

J. Tirosh, S. Yosifon, R. Eshel, A. A. Betser

J. Eng. Ind. August 1977, 99(3): 685–691. doi: https://doi.org/10.1115/1.3439299

Abstract

View articletitled, Hydroforming Process for Uniform Wall Thickness Products

Open the PDF for in another window

Topics: Wall thickness , Fluid pressure , Friction , Coulombs , Geometry , Stainless steel , Stress , Work hardening

Displacement Analysis of Spatial Seven-Link 5R-2P Mechanisms

J. Duffy

J. Eng. Ind. August 1977, 99(3): 692–701. doi: https://doi.org/10.1115/1.3439300

Abstract

View articletitled, Displacement Analysis of Spatial Seven-Link 5R-2P Mechanisms

Open the PDF for in another window

Topics: Displacement , Kinematics

On Wedge Indentation and Its Relationship With Incipient Plastic Deformation in Metal Cutting

K. J. Weinmann

J. Eng. Ind. August 1977, 99(3): 702–707. doi: https://doi.org/10.1115/1.3439301

Abstract

View articletitled, On Wedge Indentation and Its Relationship With Incipient Plastic Deformation in Metal Cutting

Open the PDF for in another window

Topics: Deformation , Metal cutting , Wedges , Brass (Metal) , Corners (Structural elements) , Microhardness , Plane strain

Dynamic Data System: A New Modeling Approach

S. M. Wu

J. Eng. Ind. August 1977, 99(3): 708–714. doi: https://doi.org/10.1115/1.3439302

Abstract

View articletitled, Dynamic Data System: A New Modeling Approach

Open the PDF for in another window

Topics: Modeling , Differential equations , Machine tools , Neutron flux , Systems analysis , Time series

The Theory of Torque, Shaking Force, and Shaking Moment Balancing of Four Link Mechanisms

J. L. Elliott, D. Tesar

J. Eng. Ind. August 1977, 99(3): 715–722. doi: https://doi.org/10.1115/1.3439303

Abstract

View articletitled, The Theory of Torque, Shaking Force, and Shaking Moment Balancing of Four Link Mechanisms

Open the PDF for in another window

Topics: Torque , Cycles

Free Convection at Supercritical Pressures in Cryo-Fluid Helium-I

S. Caspi, J. Y. Lee, T. H. K. Frederking

J. Eng. Ind. August 1977, 99(3): 723–726. doi: https://doi.org/10.1115/1.3439304

Abstract

View articletitled, Free Convection at Supercritical Pressures in Cryo-Fluid Helium-I

Open the PDF for in another window

Topics: Fluids , Helium , Natural convection , Convection , Geometry , Heat transfer , Phase transitions

An Analysis for Plane Strain Plastic Deformation in Metal-Working Process

Y. S. Lee, M. R. Patel

J. Eng. Ind. August 1977, 99(3): 727–732. doi: https://doi.org/10.1115/1.3439305

Abstract

View articletitled, An Analysis for Plane Strain Plastic Deformation in Metal-Working Process

Open the PDF for in another window

Topics: Deformation , Metalworking , Plane strain , Constitutive equations , Extruding , Fluid dynamics , Fluids , Inertia (Mechanics) , Navier-Stokes equations , Plasticity

Optimum Design of Ribbon and Wire Wound Cylinders for Metal Forming Dies

J. Gro̸nbaek, T. Wanheim

J. Eng. Ind. August 1977, 99(3): 733–737. doi: https://doi.org/10.1115/1.3439306

Abstract

View articletitled, Optimum Design of Ribbon and Wire Wound Cylinders for Metal Forming Dies

Open the PDF for in another window

Topics: Cylinders , Design , Metalworking , Wire , Winding (process) , Pressure , Shapes , Shear stress , Stress concentration , Tension

Deformation Modes and Lip Fracture During Hole Flanging of Circular Plates of Anisotropic Materials

W. Johnson, N. R. Chitkara, H. V. Minh

J. Eng. Ind. August 1977, 99(3): 738–748. doi: https://doi.org/10.1115/1.3439307

Abstract

View articletitled, Deformation Modes and Lip Fracture During Hole Flanging of Circular Plates of Anisotropic Materials

Open the PDF for in another window

Topics: Anisotropy , Deformation , Fracture (Materials) , Fracture (Process) , Plates (structures) , Failure , Geometry , Plasticity , Stress , Surface texture

The Thermodynamic Performance of Oil-Flooded Helium Screw Compressors

W. M. Toscano, L. C. Hoagland

J. Eng. Ind. August 1977, 99(3): 749–753. doi: https://doi.org/10.1115/1.3439308

Abstract

View articletitled, The Thermodynamic Performance of Oil-Flooded Helium Screw Compressors

Open the PDF for in another window

Topics: Compressors , Helium , Screws , Pressure , Refrigeration , Gases , Liquefaction , Performance characterization , Reliability , Separation (Technology)

Analysis of Plane-Strain Extrusion Through Arbitrarily Shaped Dies Using Flow Function

V. Nagpal

J. Eng. Ind. August 1977, 99(3): 754–758. doi: https://doi.org/10.1115/1.3439309

Abstract

View articletitled, Analysis of Plane-Strain Extrusion Through Arbitrarily Shaped Dies Using Flow Function

Open the PDF for in another window

Topics: Extruding , Flow (Dynamics) , Plane strain , Metals , Pressure , Shapes , Variational principles , Wedges

Group Scheduling Technique for Multiproduct, Multistage Manufacturing Systems

K. Hitomi, I. Ham

J. Eng. Ind. August 1977, 99(3): 759–765. doi: https://doi.org/10.1115/1.3439310

Abstract

View articletitled, Group Scheduling Technique for Multiproduct, Multistage Manufacturing Systems

Open the PDF for in another window

Topics: Manufacturing systems , Algorithms , Flow (Dynamics) , Machinery , Machining

Analysis of Transients in an Adaptive Control Servomechanism for Milling With Constant Force

J. Tlusty, M. A. A. Elbestawi

J. Eng. Ind. August 1977, 99(3): 766–772. doi: https://doi.org/10.1115/1.3439311

Abstract

View articletitled, Analysis of Transients in an Adaptive Control Servomechanism for Milling With Constant Force

Open the PDF for in another window

Topics: Adaptive control , Milling , Servomechanisms , Transients (Dynamics) , Stability , Computer simulation , Cutting , Delays , Feedback

A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems—Part 1

N. Orlandea, M. A. Chace, D. A. Calahan

J. Eng. Ind. August 1977, 99(3): 773–779. doi: https://doi.org/10.1115/1.3439312

Abstract

View articletitled, A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems—Part 1

Open the PDF for in another window

Topics: Design , Dynamic analysis , Simulation , Algorithms , Computer simulation , Aircraft , Circuits , Computer software , Dampers , Dynamic systems

A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems—Part 2

N. Orlandea, D. A. Calahan, M. A. Chace

J. Eng. Ind. August 1977, 99(3): 780–784. doi: https://doi.org/10.1115/1.3439313

Abstract

View articletitled, A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems—Part 2

Open the PDF for in another window

Topics: Design , Dynamic analysis , Simulation , Algorithms , Computer simulation , Aircraft , Circuits , Computer software , Dampers , Dynamic systems