..., and the inclination angle of the cavity. The experiments employed the technique of Mach–Zehnder interferometry as an imaging tool. A detailed quantitative and qualitative experimental analysis in a closed cavity using three different non-intrusive optical techniques for different ranges of Rayleigh number...

.... An experimental study using a Mach–Zehnder interferometer (MZI) has been performed. The measured distribution of local Nusselt number is in good agreement with numerical results in all three optimal configurations. inverse design optimization heat flux uniformity conjugate gradients interferometry...

...D. Roeleveld; D. Naylor; W. H. Leong Laser interferometry and flow visualization were used to study free convective heat transfer inside a vertical channel. Most studies in the literature have investigated buoyancy forces in a single direction. The study presented here investigated opposing...

... field and laser interferometry was used to obtain the temperature field. Based on the measured temperature field, the local and average Nusselt numbers were determined, which were compared with numerical predictions obtained using ansys fluent . A range of Rayleigh numbers were studied for air...

...M. E. Poulad; D. Naylor; P. H. Oosthuizen Laser interferometry is combined with high-speed digital cinematography to measure time-averaged transient and turbulent convective heat transfer rates. The method is applied to study free convection in a tall vertical air-filled enclosure. Measurements...

... input, time, and axial position using image analyzing interferometry. The curvatures and apparent contact angles for the evaporating film under various operating conditions were obtained from the measured film thickness profiles. Instability (oscillation) of the liquid film was observed at relatively...

... finite element analysis light interferometry Experimental Heat Transfer Interferometry Mixed Mode Modeling It is common for a louvered shading device, such as a Venetian blind, to be mounted on the indoor surface of a window to provide privacy and to control day-lighting. In addition...

...D. Naylor Laser interferometry can be used in a three dimensional temperature field to measure the average fluid temperature and heat transfer rate, integrated over the length of an experimental model. However, such measurements are inherently approximate when the surface temperature varies...

... 2 Rearranging Eq. ( 6 ) while using the negative square root, (7) y = c + r   sin   θ c − r 2 − δ − r   cos   θ c 2 For example, DasGupta et al. 68 and Karthikeyan et al. 69 used image analyzing interferometry to measure curvatures...

... numbers of order 10 4 . The application of interest is the cooling of electronic systems. This field is currently lacking in techniques that can measure the complex fluid phenomena encountered in real systems. The paper therefore begins with an experimental review of interferometry to assess its...

...Ichiro Nakane and; Akira Narumi; Takao Kashiwagi convection cooling confined flow flow measurement interferometry When water is cooled through 4°C, downward and upward convection may be produced due to its anomalous relationship between temperature and density. In the case...

... in good agreement with the experimental data, when the conjugate effects are accounted for. 08 Sept 1998 05 May 1999 05 12 2007 Experimental Heat Transfer Interferometry Radiation Thin Films Balaji C. , and Venkateshan S. P. , 1993 , “ Interaction of Surface...

... of YBCO films, including radiation modulators, detectors, and Fabry-Perot resonators. 08 Sept 1998 05 May 1999 05 12 2007 Experimental Heat Transfer Interferometry Radiation Thin Films Berberich B. , Chiusuri M. , Cunsolo S. , Dore P. , Kinder H...

... convection, and on the total heat transfer between the vertical walls, inside the enclosure. Correlations, valid for the laminar range, are proposed. 01 Oct 1998 19 Mar 1999 05 12 2007 Enclosure Flows Heat Transfer Interferometry Natural Convection Radiation Anderson R...