Because of the importance of fundamental knowledge on turbulent heat transfer for further decreasing entropy production and improving efficiency in various thermofluid systems, we revisit a classical issue whether enhancing heat transfer is possible with skin friction reduced or at least not increased as much as heat transfer. The answer that numerous previous studies suggest is quite pessimistic because the analogy concept of momentum and heat transport holds well in a wide range of flows. Nevertheless, the recent progress in analyzing turbulence mechanics and designing turbulence control offers a chance to develop a scheme for dissimilar momentum and heat transport. By reexamining the governing equations and boundary conditions for convective heat transfer, the basic strategies for achieving dissimilar control in turbulent flow are generally classified into two groups, i.e., one for the averaged quantities and the other for the fluctuating turbulent components. As a result, two different approaches are discussed presently. First, under three typical heating conditions, the contribution of turbulent transport to wall friction and heat transfer is mathematically formulated, and it is shown that the difference in how the local turbulent transport of momentum and that of heat contribute to the friction and heat transfer coefficients is a key to answer whether the dissimilar control is feasible. Such control is likely to be achieved when the weight distributions for the stress and flux in the derived relationships are different. Second, we introduce a more general methodology, i.e., the optimal control theory. The Fréchet differentials obtained clearly show that the responses of velocity and scalar fields to a given control input are quite different due to the fact that the velocity is a divergence-free vector, while the temperature is a conservative scalar. By exploiting this inherent difference, the dissimilar control can be achieved even in flows where the averaged momentum and heat transport equations have the same form.

References

1.
Begles
,
A. E.
, 1997, “
Heat Transfer Enhancement—The Encouragement and Accommodation of High Heat Fluxes
,”
ASME J. Heat Transfer
,
119
, pp.
8
19
.
2.
Bejan
,
A.
, 1978, “
General Criterion for Rating Heat-Exchanger Performance
,”
Int. J. Heat Mass Transfer
,
21
, pp.
655
658
.
3.
Reynolds
,
O.
, 1874, “
On the Extent and Action of the Heating Surface of Steam Boilers
,”
Manchester Proceedings of the Literary Philosophical Society
, 3rd ed., Vol.
14
, pp.
7
12
.
4.
Chilton
,
T. H.
, and
Colburn
,
A. P.
, 1934, “
Mass-Transfer Coefficients, Prediction From Data on Heat Transfer and Fluid Friction
,”
Ind. Eng. Chem.
,
26
, pp.
1183
1187
.
5.
Kays
,
W. M.
,
Crawford
,
M. E.
, and
Weigand
,
B.
, 2005,
Convective Heat and Mass Transfer
, 4th ed.,
McGraw-Hill
,
New York
.
6.
Cheng
,
L.
,
Craft
,
T. J.
,
Launder
,
B. E.
, and
Leschziner
,
M. A.
, 1994, “
Spirally Fluted Tubing: Prediction and Measurement
,”
Proceedings of the 10th International Heat Transfer Conference, I. Chemical Engineering
, London, Paper 13-HA-3, Vol.
6
, pp.
13
18
.
7.
Yabe
,
A.
,
Mori
,
Y.
, and
Hijikata
,
K.
, 1996, “
Active Heat Transfer Enhancement by Utilizing Electric Fields
,”
Annu. Rev. Heat Transfer
,
7
, pp.
183
244
.
8.
Benhalilou
,
M.
, and
Kasagi
,
N.
, 1999, “
Numerical Prediction of Heat and Momentum Transfer Over Micro-Grooved Surface With a Nonlinear k-ɛ Model
,”
Int. J. Heat Mass Transfer
,
42
, pp.
2525
2541
.
9.
Suzuki
,
H.
,
Suzuki
,
K.
, and
Sato
,
T.
, 1988, “
Dissimilarity Between Heat and Momentum Transfer in a Turbulent Boundary Layer Disturbed by a Cylinder
,”
Int. J. Heat Mass Transfer
,
31
, pp.
259
265
.
10.
Kong
,
H.
,
Choi
,
H.
, and
Lee
,
J. S.
, 2001, “
Dissimilarity Between the Velocity and Temperature Fields in a Perturbed Turbulent Thermal Boundary Layer
,”
Phys. Fluids
,
13
, pp.
1466
1479
.
11.
Kasagi
,
N.
,
Suzuki
,
Y.
, and
Fukagata
,
K.
, 2009, “
Microelectromechanical Systems-Based Feedback Control of Turbulence for Skin Friction Reduction
,”
Annu. Rev. Fluid Mech.
,
41
, pp.
231
251
.
12.
Kasagi
,
N.
,
Hasegawa
,
Y.
, and
Fukagata
,
K.
, 2009, “
Toward Cost-Effective Control of Wall Turbulence for Skin Friction Drag Reduction
,”
12th Euromech European Turbulence Conference
, Marburg, Germany, Sep. 7–10, 2009, Advances in Turbulence XII, Springer-Verlag, Berlin,pp. 189–200.
13.
Yokoo
,
M.
,
Kasagi
,
N.
, and
Suzuki
,
Y.
, 2000, “
Optimal Control of Heat Transfer and Skin Friction in Wall Turbulence
,”
Proceedings of the 3rd International Symposium Turbulence, Heat and Mass Transfer
, Nagoya, pp.
949
956
.
14.
Launder
,
B. E.
, 1978,
Heat and Mass Transport, Turbulence, Topics in Applied Physics: 12
,
P.
Bradshaw
, ed.,
Springer-Verlag
, Berlin, pp.
231
287
.
15.
Myong
,
H. K.
,
Kasagi
,
N.
, and
Hirata
,
M.
, 1989, “
Numerical Prediction of Turbulent Pipe Flow Heat Transfer for Various Prandtl Number Fluids With the Improved k-ɛ Turbulence Model
,”
JSME Int. J., Ser. II
,
32
, pp.
613
622
.
16.
Shaw
,
D. A.
, and
Hanratty
,
T.
, 1977, “
Influence of Schmidt Number on the Fluctuations of Turbulent Mass Transfer to a Wall
,”
AIChE J.
,
23
, pp.
160
169
.
17.
Hasegawa
,
Y.
, and
Kasagi
,
N.
, 2009,
Low-Pass Filtering Effects of Viscous Sublayer on High Schmidt Number Mass Transfer Close to a Solid Wall
,”
Int. J. Heat Fluid Flow
,
30
, pp.
525
533
.
18.
Kim
,
J.
, and
Moin
,
P.
, 1989, “
Transport of Passive Scalars in a Turbulent Channel Flow
,”
Turbulent Shear Flows VI
,
J.-C.
Andre
J.
Cousteix
, and
F.
Durst
eds.,
Springer-Verlag
,
Berlin - New York
, pp.
85
96
.
19.
Kasagi
,
N.
, and
Ohtsubo
Y.
, 1993, “
Direct Numerical Simulation of Low Prandtl Number Thermal Field in a Turbulent Channel Flow
,” Vol. 8,
Turbulent Shear Flows
,
Springer
,
Berlin
, pp. 97–119.
20.
Kawamura
,
H.
,
Ohsaka
,
K.
,
Abe
,
H.
, and
Yamamoto
,
K.
, 1998, “
DNS of Turbulent Heat Transfer in Channel Flow With Low to Medium-High Prandtl Number Fluid
,”
Int. J. Heat Fluid Flow
,
19
, pp.
482
491
.
21.
Kasagi
,
N.
,
Kuroda
,
A.
, and
Hirata
,
M.
, 1989, “
Numerical Investigation of Near-Wall Turbulent Heat Transfer Taking Into Account the Unsteady Heat Conduction in the Solid Wall
,”
ASME J. Heat Transfer
,
111
, pp.
385
392
.
22.
Kasagi
,
N.
,
Tomita
,
Y.
, and
Kuroda
,
A.
, 1992, “
Direct Numerical Simulation of Passive Scalar Field in a Two Dimensional Turbulent Channel Flow
,”
ASME J. Heat Transfer
,
114
, pp.
598
606
.
23.
Fukagata
,
K.
,
Iwamoto
,
K.
, and
Kasagi
,
N.
, 2002, “
Contribution of Reynolds Stress Distribution to the Skin Friction in Wall-Bounded Flows
,”
Phys. Fluids
,
14
, pp.
L73
L76
.
24.
Kasagi
,
N.
, and
Fukagata
,
K.
, 2006, “
The FIK Identity and Its Implication for Turbulent Skin Friction Control
,”
Transition and Turbulence Control
,
M.
Gad-el-Hak
and
H. M.
Tsai
, eds.,
World Scientific
,
Singapore
, pp.
297
324
.
25.
Kasagi
,
N.
,
Fukagata
,
K.
, and
Suzuki
,
Y.
, 2006, “
Toward Feedback Control of Wall Turbulence for Skin Friction
,”
Proceedings of Conference Active Flow Control
, Berlin, Germany, Sept. 27–29, CD-ROM, pp.
1
19
.
26.
Fukagata
,
K.
,
Iwamoto
,
K.
, and
Kasagi
,
N.
, 2005, “
Novel Turbulence Control Strategy for Simultaneously Achieving Friction Drag Reduction and Heat Transfer Augmentation
,”
Proceedings of the 4th International Symposium Turbulence and Shear Flow Phenomena
, Williamsburg, VA, June 27–29, Vol.
1
, pp.
307
312
.
27.
Iwamoto
,
K.
,
Suzuki
,
Y.
, and
Kasagi
,
N.
, 2002, “
Reynolds Number Effect on Wall Turbulence: Toward Effective Feedback Control
,”
Int. J. Heat Fluid Flow
,
23
, pp.
678
689
.
28.
Choi
,
H.
,
Moin
,
P.
, and
Kim
,
J.
, 1994, “
Active Turbulence Control for Drag Reduction in Wall-Bounded Flows
,”
J. Fluid Mech.
,
262
, pp.
75
110
.
29.
Hasegawa
,
Y.
, and
Kasagi
,
N.
, 2011, “
Dissimilar Control of Momentum and Heat Transfer in a Fully Developed Turbulent Channel Flow
,”
J. Fluid Mech.
,
683
, pp.
57
93
.
30.
Lee
,
C.
,
Kim
,
J.
, and
Choi
,
H.
, 1998, “
Suboptimal Control of Turbulent Channel Flow for Drag Reduction
,”
J. Fluid Mech.
,
358
, pp.
245
258
.
31.
Min
,
T.
,
Kang
,
S. M.
,
Speyer
,
J. L.
, and
Kim
,
J.
, 2006, “
Sustained Sublaminar Drag in a Fully Developed Channel Flow
,”
J. Fluid Mech.
,
558
, pp.
309
318
.
32.
Hœpffner
,
J.
, and
Fukagata
,
K.
, 2009, “
Pumping or Drag Reduction?
J. Fluid Mech.
,
635
, pp.
171
187
.
33.
Mamori
,
H.
,
Fukagata
,
K.
, and
Hœpffner
,
J.
, 2010, “
The Phase Relationship in Laminar Channel Flow Controlled by Traveling Wave-Like Blowing or Suction
,”
Phys. Rev. E
,
81
, p.
046304
.
You do not currently have access to this content.