If a thermal disturbance such as a step change in temperature is applied at each surface of a homogeneous slab of thickness 2L, the effect of cooling at x = +L at first has no effect at x = −L but is clearly evident after a time described by a Fourier number F0 = λt/ρcpL2 of around 0.2. To establish the time of a perceptible change the minimum value of φi − (φ1 + (φ2) is sought, where φ1 is the flux into a semi-infinite solid and φ1 and φ2 are the first and second eigenfunction contributions to the solution for a slab of finite thickness. Cooling throughout the slab is determined virtually by the first eigenfunction alone after F0 = 0.22. For a fluid-cooled slab these values are larger.
Issue Section:
Technical Briefs
1.
Bachmann, H., 1938, Tafeln u¨ber Abku¨hlungsvorga¨nge Einfacher Ko¨rper, Verlag Julius Springer, Berlin.
2.
Carslaw, H. S., and Jaeger, J. C, 1959, Conduction of Heat in Solids, Clarendon Press, Oxford, a: p. 97, Eq. (8); b: p. 61, Eq. (11); c: p. 122, Eq. (12); d: p. 59, Eq. (3);e:p. 71, Eq. (2).
3.
Davies
M. G.
1978
, “Structure of the Transient Cooling of a Slab
,” Applied Energy
, Vol. 4
, pp. 87
–126
.4.
Davies
M. G.
1986
, “The Passive Solar Heated School in Wallasey: III—Model Studies of the Thermal Response of a Passive School Building
,” Energy Research
, Vol. 10
, pp. 203
–234
.5.
Groeber
H.
1925
, “Die Erwa¨rmung und Abku¨hlung Einfacher Geometrischer Ko¨rper
,” Z. Vereines deut. Ingenieure
, Vol. 69
, pp. 705
–711
.6.
Heisler
P. M.
1947
, “Temperature Charts for Induction and Constant Temperature Heating
,” Transactions of the ASME
, Vol. 69
, pp. 227
–236
.7.
Tzou, D. Y., 1997, Macro-to-Microscale Heat Transfer—The Lagging Behavior, Taylor & Francis, Washington DC.
This content is only available via PDF.
Copyright © 1999
by The American Society of Mechanical Engineers
You do not currently have access to this content.