Abstract

In order to improve the convective heat transfer efficiency of a shell-and-tube heat exchanger, a novel ladder-shaped bridge finned tube (LBFT) is presented. The LBFT possesses outer low helical integral fins, two layers of staggered transverse bridge, upper passage, middle passage, and bottom passage. The convective heat transfer performance of the LBFT is studied and experimental results show that the Nusselt numbers outside the tube and the overall heat transfer coefficients of the LBFT are significantly greater than those of the smooth tube. The bridges, bridge roots, and pores formed on the outer fins contribute to the larger heat transfer coefficient. Both the Nusselt number and the overall heat transfer coefficient decrease, while the friction resistance coefficient increases with outer helical fin pitch increasing and bridge width increasing. As the Reynolds number increases, the comprehensive performance evaluation criterion (PEC) decreases at first and then increases. The maximum PEC occurs at the Re number of 2300 and is up to 1.34.

References

1.
Wang
,
C.
,
Zhu
,
J. G.
, and
Sang
,
Z. F.
,
2010
, “
Experimental Investigation on Heat Transfer and Frictional Characteristics of Shell-and-Tube Heat Exchangers With Different Baffles and Tubes
,”
AIP Conf. Proc.
,
1207
, pp.
429
435
.10.1063/1.3366403
2.
Thome
,
J. R.
,
2017
, “
A Review on Shell-and-Tube Heat Exchangers for the Chemical Processing Industry: Heat Transfer Augmentation
,”
J. Enhanced Heat Transfer
,
24
(
1–6
), pp.
569
586
.10.1615/JEnhHeatTransf.v24.i1-6.310
3.
Eiamsa-Ard
,
S.
,
Seemawute
,
P.
, and
Wongcharee
,
K.
,
2010
, “
Influences of Peripherally-Cut Twisted Tape Insert on Heat Transfer and Thermal Performance Characteristics in Laminar and Turbulent Tube Flows
,”
Exp. Therm. Fluid Sci.
,
34
(
6
), pp.
711
719
.10.1016/j.expthermflusci.2009.12.013
4.
Hasanpour
,
A.
,
Farhadi
,
M.
, and
Sedighi
,
K.
,
2016
, “
Experimental Heat Transfer and Pressure Drop Study on Typical, Perforated, V-Cut and U-Cut Twisted Tapes in a Helically Corrugated Heat Exchanger
,”
Int. Commun. Heat Mass Transfer
,
71
, pp.
126
136
.10.1016/j.icheatmasstransfer.2015.12.032
5.
Liu
,
P.
,
2018
, “
An Experimental and Numerical Study on the Laminar Heat Transfer and Flow Characteristics of a Circular Tube Fitted With Multiple Conical Strips Inserts
,”
Int. J. Heat Mass Transfer
,
117
, pp.
691
709
.10.1016/j.ijheatmasstransfer.2017.10.035
6.
Bhuiya
,
M. M. K.
,
Chowdhury
,
M. S. U.
,
Saha
,
M.
, and
Islam
,
M. T.
,
2013
, “
Heat Transfer and Friction Factor Characteristics in Turbulent Flow Through a Tube Fitted With Perforated Twisted Tape Inserts
,”
Int. Commun. Heat Mass Transfer
,
46
(
8
), pp.
49
57
.10.1016/j.icheatmasstransfer.2013.05.012
7.
Tu
,
W. B.
,
Wang
,
Y.
, and
Tang
,
Y.
,
2016
, “
Thermal Characteristic of a Tube Fitted With Porous Media Inserts in the Single Phase Flow
,”
Int. J. Therm. Sci.
,
110
, pp.
137
145
.10.1016/j.ijthermalsci.2016.06.035
8.
Chen
,
H. P.
,
Wan
,
Z. P.
,
Mo
,
H. J.
,
Huang
,
S. F.
, and
Tang
,
Y.
,
2019
, “
Experimental Studies on the Compound Thermo-Hydraulic Characteristics in a 3D Inner Finned Tube With Porous Copper Fiber Inserts
,”
Int. Commun. Heat Mass Transfer
,
100
, pp.
51
59
.10.1016/j.icheatmasstransfer.2018.12.007
9.
Oneissi
,
M.
,
Habchi
,
C.
,
Russeil
,
S.
,
Bougeard
,
D.
, and
Lemenand
,
T.
,
2016
, “
Novel Design of Delta Winglet Pair Vortex Generator for Heat Transfer Enhancement
,”
Int. J. Therm. Sci.
,
109
, pp.
1
9
.10.1016/j.ijthermalsci.2016.05.025
10.
Dang
,
W.
, and
Wang
,
L. B.
,
2021
, “
Convective Heat Transfer Enhancement Mechanisms in Circular Tube Inserted With a Type of Twined Coil
,”
Int. J. Heat Mass Transfer
,
169
, p.
20960
.10.1016/j.ijheatmasstransfer.2021.120960
11.
Xia
,
W.
,
Wu
,
B.
,
Tang
,
Y.
, and
Ye
,
B. Y.
,
2003
, “
On Chopping–Extrusion of Integral-Fin Copper Tubes
,”
J. Mater. Process. Technol.
,
138
, pp.
385
389
.10.1016/S0924-0136(03)00103-1
12.
Wan
,
Z. P.
, and
Tang
,
Y.
,
2010
, “
Production of Integral Serrated Outside Finned Tube Using a Combined Method of Rolling and Wedging/Extruding
,”
Int. J. Mach. Tools Manuf.
,
50
, pp.
487
490
.10.1016/j.ijmachtools.2010.02.005
13.
Rozzi
,
S.
,
Massini
,
R.
,
Paciello
,
G.
,
Pagliarini
,
G.
,
Rainieri
,
S.
, and
Trifiro
,
A.
,
2007
, “
Heat Treatment of Fluid Foods in a Shell and Tube Heat Exchanger: Comparison Between Smooth and Helically Corrugated Wall Tubes
,”
J. Food Eng.
,
79
, pp.
249
254
.10.1016/j.jfoodeng.2006.01.050
14.
Yan
,
Y. Y.
,
Neve
,
R. S.
,
Karayiannis
,
T. G.
,
Collins
,
M. W.
, and
Allen
,
P. H. G.
,
1996
, “
EHD Effects on Nucleate Boiling at Passively Enhanced Surfaces
,”
Exp. Heat Transfer
,
9
(
3
), pp.
195
211
.10.1080/08916159608946521
15.
Damianidis
,
C.
,
Karayiannis
,
T. G.
,
Al-Dadah
,
A.
,
James
,
R. W.
,
Collins
,
M. W.
, and
Allen
,
P. H. G.
,
1992
, “
EHD Boiling Enhancement in Shell and Tube Evaporators and Its Application in Refrigeration Plants
,”
ASHRAE Trans.
,
98
(
Part 2
), pp.
462
472
.https://www.researchgate.net/publication/285837285
16.
Park
,
K. J.
,
Kang
,
D. G.
, and
Jung
,
D.
,
2011
, “
Condensation Heat Transfer Coefficients of R1234yf on Plain, Low Fin, and Turbo-C Tubes
,”
Int. J. Refrig.
,
34
(
1
), pp.
317
321
.10.1016/j.ijrefrig.2010.06.010
17.
Zhang
,
Z. G.
,
Ma
,
D. B.
,
Fang
,
X. M.
, and
Gao
,
X. N.
,
2008
, “
Experimental and Numerical Heat Transfer in a Helically Baffled Heat Exchanger Combined With One Three-Dimensional Finned Tube
,”
Chem. Eng. Process.
,
47
, pp.
1738
1743
.10.1016/j.cep.2007.09.012
18.
Wang
,
X. W.
,
Wan
,
Z. P.
, and
Tang
,
Y.
,
2014
, “
Investigations on the Heat Transfer Performance of Edge-Shaped Finned-Tubes
,”
Heat Mass Transfer
,
50
(
9
), pp.
1187
1194
.10.1007/s00231-014-1331-3
19.
Wan
,
Z. P.
,
Wang
,
X. W.
, and
Tang
,
Y.
,
2015
, “
Heat Transfer Performance of an Edge-Shaped Finned Tube
,”
Heat Transfer Eng.
,
36
(
6
), pp.
574
581
.10.1080/01457632.2014.939527
20.
Filho
,
E. P. B.
,
Jabardo
,
J. M. S.
, and
Barbieri
,
P. E. L.
,
2004
, “
Convective Boiling Pressure Drop of Refrigerant R-134a in Horizontal Smooth and Microfin Tubes
,”
Int. J. Refrig.
,
27
, pp.
895
903
.10.1016/j.ijrefrig.2004.04.014
21.
Duan
,
L. F.
,
Ling
,
X.
, and
Peng
,
H.
,
2018
, “
Flow and Heat Transfer Characteristics of a Double-Tube Structure Internal Finned Tube With Blossom Shape Internal Fins
,”
Appl. Therm. Eng.
,
128
, pp.
1102
1115
.10.1016/j.applthermaleng.2017.09.026
22.
Yang
,
D.
,
Li
,
H. X.
, and
Chen
,
T. K.
,
2001
, “
Pressure Drop, Heat Transfer and Performance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes
,”
Exp. Therm. Fluid Sci.
,
24
(
3–4
), pp.
131
138
.10.1016/S0894-1777(01)00047-4
23.
Laohalertdecha
,
S.
,
Naphon
,
P.
, and
Wongwises
,
S.
,
2007
, “
A Review of Electrohydrodynamic Enhancement of Heat Transfer
,”
Renewable Sustainable Energy Rev.
,
11
(
5
), pp.
858
876
.10.1016/j.rser.2005.07.002
24.
Tusar
,
M. H.
,
Bhowmik
,
P. K.
,
Salam
,
B.
,
Ahamed
,
J. U.
, and
Kim
,
J. K.
,
2021
, “
Convective Heat Transfer and Friction Factor Characteristics of Helical Strip Inserted Annuli at Turbulent Flow
,”
Int. J. Heat Mass Transfer
,
176
, p.
121422
.10.1016/j.ijheatmasstransfer.2021.121422
25.
McCoy
,
A.
,
Constantinesc
,
G.
, and
Weber
,
L. J.
,
2008
, “
Numerical Investigation of Flow Hydrodynamics in a Channel With a Series of Groynes
,”
J. Hydraul. Eng.
,
134
(
2
), pp.
157
172
.10.1061/(ASCE)0733-9429(2008)134:2(157)
26.
Chamoli
,
S.
,
Lu
,
R. X.
, and
Yu
,
P.
,
2017
, “
Thermal Characteristic of a Turbulent Flow Through a Circular Tube Fitted With Perforated Vortex Generator Inserts
,”
Appl. Therm. Eng.
,
121
, pp.
1117
1134
.10.1016/j.applthermaleng.2017.03.145
27.
Dizaji
,
H. S.
,
Jafarmadar
,
S.
, and
Mobadersani
,
F.
,
2015
, “
Experimental Studies on Heat Transfer and Pressure Drop Characteristics for New Arrangements of Corrugated Tubes in a Double Pipe Heat Exchanger
,”
Int. J. Therm. Sci.
,
96
, pp.
211
220
.10.1016/j.ijthermalsci.2015.05.009
You do not currently have access to this content.