Magnetizing force, which acts in a magnetic field of steep gradient, was applied to air in a cube heated from above and cooled from below, and with the four vertical walls thermally insulated. A four-poles magnet was installed to apply the cusp-shaped magnetic field to air in the cubic enclosure. A simple model equation was derived for magnetizing force and numerically computed for the system. Without a magnetic field, the conduction was stable, but under the magnetizing force a strong downward flow occurred from the center of the top heated plate and the average Nusselt number attained Nu=1.17 at and γ=0.5, which is equivalent to a temperature difference of 4 [°C] between the top and bottom walls under a maximum magnetic induction of 0.9 [T] inside a cube of heated from above. The flow visualization experiment with hot incense smoke proved the downward flow from the top hot plate.
Convection Induced by a Cusp-Shaped Magnetic Field for Air in a Cube Heated From Above and Cooled From Below
Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division November 7, 2000; revision received June 12, 2001. Associate Editor: R. L. Mahajan.
- Views Icon Views
- Share Icon Share
- Search Site
Kaneda, M., Tagawa , T., and Ozoe, H. (June 12, 2001). "Convection Induced by a Cusp-Shaped Magnetic Field for Air in a Cube Heated From Above and Cooled From Below ." ASME. J. Heat Transfer. February 2002; 124(1): 17–25. https://doi.org/10.1115/1.1418369
Download citation file: