Calorimetric methods for measuring surface heat flux use Joulean heating to keep the surface isothermal. This limits them to measuring the heat flux of surfaces that are hotter than their surroundings. Presented in this paper is a method whereby reversible Peltier effect heat transfer is used to maintain this isothermality, making it suitable for surfaces that are either hotter or colder than the surroundings. The paper outlines the theory for the method and describes physical models that have been constructed, calibrated, and tested. The tested physical models were found capable of measuring heat fluxes with an absolute accuracy of 1 percent over a wide range of temperature (5–50°C) and heat flux (15–500 W/m2), while maintaining isothermality to within 0.03 K. A drawback of the method is that it appears to be suited only for measuring the heat flux from thick metallic plates.
Skip Nav Destination
Article navigation
August 1989
Research Papers
The Measurement of Surface Heat Flux Using the Peltier Effect
E. C. Shewen,
E. C. Shewen
Pavement Management Systems Ltd., Cambridge, Ontario, Canada
Search for other works by this author on:
K. G. T. Hollands,
K. G. T. Hollands
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Search for other works by this author on:
G. D. Raithby
G. D. Raithby
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Search for other works by this author on:
E. C. Shewen
Pavement Management Systems Ltd., Cambridge, Ontario, Canada
K. G. T. Hollands
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada
G. D. Raithby
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada
J. Heat Transfer. Aug 1989, 111(3): 798-803 (6 pages)
Published Online: August 1, 1989
Article history
Received:
October 26, 1987
Online:
October 20, 2009
Citation
Shewen, E. C., Hollands, K. G. T., and Raithby, G. D. (August 1, 1989). "The Measurement of Surface Heat Flux Using the Peltier Effect." ASME. J. Heat Transfer. August 1989; 111(3): 798–803. https://doi.org/10.1115/1.3250754
Download citation file:
Get Email Alerts
Cited By
Numerical Investigation of Thermal-Hydraulic Performance of U-Tubes Enhanced With Ellipsoidal 45 deg Dimples
J. Heat Transfer (August 2022)
Revisiting the Schrage Equation for Kinetically Limited Evaporation and Condensation
J. Heat Transfer (August 2022)
Related Articles
Determination of Convective Heat Flux on Steady-State Heat Transfer Surfaces With Arbitrarily Specified Boundaries
J. Heat Transfer (November,1996)
Thermal Characterization of Building Walls Under Random Boundary Conditions
J. Thermal Sci. Eng. Appl (October,2021)
Hysteresis of Thermochromic Liquid Crystal Temperature Measurement Based on Hue
J. Heat Transfer (November,1999)
Experiments on Free Convection Between Vertical Plates With Symmetric Heating
J. Heat Transfer (August,1982)
Related Proceedings Papers
Related Chapters
Thermoelectric Coolers
Thermal Management of Microelectronic Equipment
Experimental Investigation of an Improved Thermal Response Test Equipment for Ground Source Heat Pump Systems
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Pool Boiling
Thermal Management of Microelectronic Equipment, Second Edition