... systems Engines Experimental Finite element Internal combustion engines Modeling Power Thermal Turbines Control systems Co- generation Hybridized and fully electrified boosting technologies have become increasingly popular in recent years. Engine-boosting provides advantages in terms...

... and a virtual control system of IGHAT cycle is established on the Ovation distribution control platform. The model-in-loop control platform is eventually set up based on the interaction between the simulation model and the control system. A case study is implemented on this model-in-loop control platform...

... . Manuscript received August 11, 2017; final manuscript received September 29, 2017; published online June 25, 2018. Editor: David Wisler. 11 08 2017 29 09 2017 Energy systems Energy systems Turbines Control systems Engine downsizing via high throughput turbochargers (TC...

..., χ cyl . The engine model is used for evaluating the designed controllers over the federal test procedure (FTP) for heavy duty (HD) vehicles. Results indicate that the control system meets all targets, namely fast air charge and χ cyl control during torque transients, robust NO x control during...

... , “ Neural Network Tool box™ User's Guide ,” The MathWorks Inc., Natick, MA. Energy systems Gas turbine technology Modeling Neural networks Unsteady Control systems To address the challenge of modeling gas turbine (GT) start-up, white-box, gray-box, and black-box models can...

... OWER . Manuscript received July 10, 2017; final manuscript received August 29, 2017; published online January 10, 2018. Editor: David Wisler. 10 07 2017 29 08 2017 Energy systems Energy Energy systems Fuel cell applications Thermodynamics Control systems Advanced...

..., 2017; published online December 6, 2017. Editor: David Wisler. 10 07 2017 11 08 2017 Energy systems Energy Energy systems Fuel cell applications Modeling Thermodynamics Control systems The technology of solid oxide fuel cell gas turbine (SOFC/GT) hybrid systems (HSs...

.... Editor: Riccardo Da Soghe. 25 07 2017 22 08 2017 Combustors Convective heat transfer Energy systems Control systems The present paper considers simultaneous use of full-coverage effusion cooling (applied on an external plate surface) and impingement array cooling (applied...

... systems Power Unsteady Control systems Co- generation 14 07 2017 29 07 2017 Contributed by the Industrial and Cogeneration Committee of ASME for publication in the J OURNAL OF E NGINEERING FOR G AS T URBINES AND P OWER . Manuscript received July 14, 2017; final manuscript...

... Control systems A power plant operator training simulator (OTS) is, as the name suggests, generally used for training plant operators. It can also be used as a means of instrumentation and control checking. It is, however, not common to use the simulator as a tool to examine operational scenarios...

... generation Control systems Combustion of fossil fuels in oxygen results in combustion products that are primarily CO 2 and H 2 O, from which the water can be condensed to yield a reasonably high-purity CO 2 stream for use or storage. Although there are several power systems capable of operating...

... Thermocouples Thermodynamics Control systems Nuclear power generation Co- generation The dynamic modeling of power plant cycles is considered as one of the most effective tools for controller design, simulators, and fault diagnosis systems. In addition to an acceptable accuracy for a dynamic system...

... 05 2017 Combustion Computational Energy Energy systems Engines Environmental Experimental Flame Fossil power generation Fuel combustion Intelligent control Particulate Power systems Nuclear power generation Control systems Diesel engines have high fuel economy...

...; published online January 10, 2017. Assoc. Editor: Stani Bohac. 19 04 2016 25 09 2016 Energy systems Fuels Internal combustion engines Control systems Infrastructure The performance of a diesel engine in terms of pollutant emission, noise generation, and engine startup time...

... control for restarts after the 180-h cool-down Energy systems Fatigue Thermodynamics Control systems Operations of combined cycle power plants (CCPPs) are required to maintain the electric power grid stability due to the increase in power supplied from renewable sources such as wind...

...; published online August 16, 2016. Editor: David Wisler. 02 06 2016 27 06 2016 Energy Energy conversion Energy systems Fossil Gas turbine technology Heat exchangers Heat recovery Modeling Power Power systems Reliability Thermal Nuclear power generation Control systems Co...

... AND P OWER . Manuscript received February 12, 2016; final manuscript received February 19, 2016; published online April 26, 2016. Editor: David Wisler. 12 02 2016 19 02 2016 Energy systems Internal combustion engines Modeling Vibration Control systems Combustion control...

...Leonardo Pierobon; Richard Chan; Xiangan Li; Krishna Iyengar; Fredrik Haglind; Erik Ydstie The implementation of waste heat recovery units on oil and gas offshore platforms demands advances in both design methods and control systems. Model-based control algorithms can play an important role...

.... Therefore, here only gives the corresponding step responses of these three weights. where K P  = 3, K I  = 250, K D  = 0.0075, and T D  = 0.00035. The dynamic properties of the LQG-controlled system shall be compared with that of the conventional linearized PID control which is often used...

... May 12, 2015. Editor: David Wisler. 27 02 2015 30 03 2015 12 05 2015 In this paper, a systematic model-based calibration framework basing on robust design optimization technique is developed for engine control system. In this framework, the control system is calibrated...