The paper describes results of a parametric study obtained while using an analytical model described earlier (Bunama and Karim, 1997b) investigating the combined effects of mass, energy, and momentum transfer with variable transport and thermodynamic properties on the formation of fuel vapor-air mixtures above a stagnant liquid fuel surface within the confines, of a vertical cylindrical vessel. This was done mainly to examine the establishment of the formation of flammable mixtures and their changes in size and location with time within liquid fuel tanks that are partially empty. The effects of changes in the ambient and wall temperatures, presence of liquid on the walls and vessel geometry were considered. Moreover, the results of a corresponding experimental investigation are presented. Much of the data relates to the high volatility fuel n-pentane that represents the lighter fuel fractions in commercial fuels which through their early evaporation contribute much to the fire hazards in fuel tanks.

Issue Section:
Gas Turbines: Combustion and Fuels
Topics:
Fuels, Vessels, Fuel storage, Evaporation, Fire, Geometry, Hazards, Momentum, Vapors, Volatility, Wall temperature
1.
Bunama
R.
, and
Karim
G. A.
,
1997
a, “
Modeling the Transient Formation of Flammable Atmospheres Due to Convective Diffusion
,”
ASME Journal of Energy Resources Technology
, Vol.
119
, pp.
271
–
275
.
2.
Bunama, R., and Karim, G. A., 1997b, “Modeling the Transient Formation of Flammable Atmospheres Within Cylindrical Vessels Containing Some Fuel,” Proceedings, 5th Computational Fluid Dynamics Society of Canada Conference, CFD97, pp. 12.9–12.15.
3.
Bunama, R., Zhang, C., and Karim, G. A., 1995, “An Experimental and Analytical Examination of the Transient Formation of Flammable Atmospheres within Fuel Containers,” Proc. of Spring Technical Meeting, The Combustion Institute, Canadian Section, pp. 197–200.
4.
Cussler, E. L., 1992, Diffusion Mass Transfer in Fluid Systems, Cambridge, New York.
5.
Karim, G. A., and Zhang, C. Y., 1992, “Flame Propagation Within Stratified Flame Mixtures Formed by Diffusion in a Vertical Tube,” Materials and Design Against Fire, Proceedings of the Institution of Mechanical Engineers, London, U.K., pp. 75–81.
6.
Markham
B. L.
, and
Rosenberger
F.
,
1980
, “
Velocity and Concentration Distributions in a Stefan Diffusion Tube
,”
Chemical Engineering Communications
, Vol.
5
, pp.
287
–
298
.
This content is only available via PDF.
Copyright © 1999
 by The American Society of Mechanical Engineers
You do not currently have access to this content.