Abstract

In this work, the impact of small mistuning on rotor/stator contact interactions is investigated. First, a detailed study of a rotor/stator interaction between the first bending modes and the second engine order is presented in the tuned case. Then, a numerical investigation on the effect of mistuning on the studied rotor/stator contact interaction is carried out. In particular, a stochastic analysis is performed to evaluate the robustness of the interaction with respect to the mistuning level. Simulations are conducted using a reducedo rder model (ROM) of an industrial-bladed disk that combines both physical degrees-of-freedom (along blades tip for contact treatment) and modal coordinates. Mistuning is introduced in the tuned ROM by means of a modified version of the component mode mistuning method that allows to keep physical degrees-of-freedom within the reduced basis. Nonlinear amplification factors, i.e., the amplification factors in the context of contact nonlinearities, are compared with their linear counterparts, and the latter are computed using a linear forcing on each blade using a two nodal diameters traveling wave excitation on the mistuned and the tuned bladed disk. The comparison between the linear and nonlinear amplification factor for each sample highlights that no correlation exists between a mistuning pattern leading to high amplifications in a linear context or when contact nonlinearities are taken into account. Therefore, dedicated analyses on the effect of mistuning should be undertaken with contact nonlinearities considerations at the design stage especially if intentional mistuning is considered.

References

1.
Castanier
,
M. P.
, and
Pierre
,
C.
,
2006
, “
Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions
,”
J. Propul. Power
,
22
(
2
), pp.
384
396
.10.2514/1.16345
2.
Yuan
,
J.
,
Scarpa
,
F.
,
Allegri
,
G.
,
Titurus
,
B.
,
Patsias
,
S.
, and
Rajasekaran
,
R.
,
2017
, “
Efficient Computational Techniques for Mistuning Analysis of Bladed Discs: A Review
,”
Mech. Syst. Signal Process.
,
87
, pp.
71
90
.10.1016/j.ymssp.2016.09.041
3.
Ewins
,
D. J.
,
1969
, “
The Effects of Detuning Upon the Forced Vibrations of Bladed Disks
,”
J. Sound Vib.
,
9
(
1
), pp.
65
79
.10.1016/0022-460X(69)90264-8
4.
Dye
,
R. C. F.
, and
Henry
,
T. A.
,
1969
, “
Vibration Amplitudes of Compressor Blades Resulting From Scatter in Blade Natural Frequencies
,”
J. Eng. Power
,
91
(
3
), pp.
182
187
.10.1115/1.3574726
5.
Pierre
,
C.
, and
Cha
,
P. D.
,
1989
, “
Strong Mode Localization in Nearly Periodic Disordered Structures
,”
AIAA J.
,
27
(
2
), pp.
227
241
.10.2514/3.10085
6.
Whitehead
,
D. S.
,
1976
, “
Research Note: Effect of Mistuning on Forced Vibration of Blades With Mechanical Coupling
,”
J. Mech. Eng. Sci.
,
18
(
6
), pp.
306
307
.10.1243/JMES_JOUR_1976_018_049_02
7.
Martel
,
C.
, and
Corral
,
R.
,
2009
, “
Asymptotic Description of Maximum Mistuning Amplification of Bladed Disk Forced Response
,”
ASME J. Eng. Gas Turbines Power
,
131
(
2
), p.
022506
.10.1115/1.2968868
8.
Petrov
,
E.
, and
Ewins
,
D. J.
,
2005
, “
Method for Analysis of Nonlinear Multiharmonic Vibrations of Mistuned Bladed Disks With Scatter of Contact Interface Characteristics
,”
ASME J. Turbomach.
,
127
(
1
), pp.
128
136
.10.1115/1.1812781
9.
Panning
,
L.
,
Sextro
,
W.
, and
Popp
,
K.
,
2003
, “
Spatial Dynamics of Tuned and Mistuned Bladed Disks With Cylindrical and Wedge-Shaped Friction Dampers
,”
Int. J. Rotating Mach.
,
9
(
3
), pp.
219
228
.10.1155/S1023621X03000198
10.
Mitra
,
M.
,
Zucca
,
S.
, and
Epureanu
,
B. I.
,
2016
, “
Effects of Contact Mistuning on Shrouded Blisk Dynamics
,”
ASME
Paper No. GT2016-57812.10.1115/GT2016-57812
11.
Joannin
,
C.
,
Chouvion
,
B.
,
Thouverez
,
F.
,
Ousty
,
J.-P.
, and
Mbaye
,
M.
,
2017
, “
A Nonlinear Component Mode Synthesis Method for the Computation of Steady-State Vibrations in Nonconservative Systems
,”
Mech. Syst. Signal Process.
,
83
, pp.
75
92
.10.1016/j.ymssp.2016.05.044
12.
Tang
,
W.
, and
Epureanu
,
B. I.
,
2017
, “
Nonlinear Dynamics of Mistuned Bladed Disks With Ring Dampers
,”
Int. J. Non-Linear Mech.
,
97
, pp.
30
40
.10.1016/j.ijnonlinmec.2017.08.001
13.
Pourkiaee
,
M.
, and
Zucca
,
S.
,
2019
, “
Reduced Order Model for Nonlinear Dynamics of Mistuned Bladed Disks With Shroud Friction Contacts
,”
ASME J. Eng. Gas Turbines Power
,
141
(
1
), p.
011031
.10.1115/1.4041653
14.
Zhao
,
W.
,
Zhang
,
D.
, and
Xie
,
Y.
,
2019
, “
Vibration Analysis of Mistuned Damped Blades With Nonlinear Friction and Contact
,”
J. Low Freq. Noise, Vib. Active Control
,
38
(
3–4
), pp.
1505
1521
.10.1177/1461348419836352
15.
Batailly
,
A.
,
Agrapart
,
Q.
,
Millecamps
,
A.
, and
Brunel
,
J.-F.
,
2016
, “
Experimental and Numerical Simulation of a Rotor/Stator Interaction Event Localized on a Single Blade Within an Industrial High-Pressure Compressor
,”
J. Sound Vib.
,
375
, pp.
308
331
.10.1016/j.jsv.2016.03.016
16.
Joachim
,
J.
,
Nyssen
,
F.
, and
Batailly
,
A.
,
2021
, “
Numerical Investigation of a Mistuned Academic Bladed Disk Dynamics With Blade/Casing Contact
,”
ASME J. Eng. Gas Turbines Power
,
143
(
4
), p. 041028. 10.1115/1.4047780
17.
Carpenter
,
N.
,
Taylor
,
R.
, and
Katona
,
M.
,
1991
, “
Lagrange Constraints for Transient Finite Element Surface Contact
,”
Int. J. Numer. Methods Eng.
,
32
(
1
), pp.
103
128
.10.1002/nme.1620320107
18.
Legrand
,
M.
,
Batailly
,
A.
, and
Pierre
,
C.
,
2012
, “
Numerical Investigation of Abradable Coating Removal in Aircraft Engines Through Plastic Constitutive Law
,”
ASME J. Comput. Nonlinear Dyn.
,
7
(
1
), p. 011010.10.1115/1.4004951
19.
Batailly
,
A.
,
Meingast
,
M.
, and
Legrand
,
M.
,
2015
, “
Unilateral Contact Induced Blade/Casing Vibratory Interactions in Impellers: Analysis for Rigid Casings
,”
J. Sound Vib.
,
337
, pp.
244
262
.10.1016/j.jsv.2014.10.010
20.
Millecamps
,
A.
,
Brunel
,
J.-F.
,
Dufrenoy
,
P.
,
Garcin
,
F.
, and
Nucci
,
M.
,
2009
, “
Influence of Thermal Effects During Blade-Casing Contact Experiments
,”
ASME
Paper No. DETC2009-86842.10.1115/DETC2009-86842
21.
Lim
,
S.-H.
,
Bladh
,
R.
,
Castanier
,
M. P.
, and
Pierre
,
C.
,
2007
, “
Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration
,”
AIAA J.
,
45
(
9
), pp.
2285
2298
.10.2514/1.13172
22.
Joachim
,
J.
,
2020
, “
Développement de Modèles Numériques de Roues Aubagées Désaccordées Dans un Contexte Non-Linéaire
,” Ph.D. thesis,
Polytechnique Montréal
, Montréal, QC, Canada, p.
2888893
.
23.
Klauke
,
T.
,
Kühhorn
,
A.
,
Beirow
,
B.
, and
Golze
,
M.
,
2009
, “
Numerical Investigations of Localized Vibrations of Mistuned Blade Integrated Disks (Blisks)
,”
ASME J. Turbomach.
,
131
(
3
), p.
031002
.10.1115/1.2985074
You do not currently have access to this content.