Combustion in conventional fossil-fueled power plants is highly irreversible, resulting in poor overall energy conversion efficiency values (less than 40 percent in many cases). The objective of this paper is to discuss means by which this combustion irreversibility might be reduced in gas turbine power cycles, and the conversion efficiency thus improved upon. One such means is thermochemical recuperation of exhaust heat. The proposed cycle recycles part of the exhaust gases, then mixes them with fuel prior to injection into a reformer. The heat required for the endothermic reforming reactions is provided by the hot turbine exhaust gases. Assuming state-of-the-art technology, and making a number of simplifying assumptions, an overall efficiency of 65.4 percent was attained for the cycle, based on the lower heating value (LHV) of the methane fuel. The proposed cycle is compared to a Humid Air Turbine (HAT) cycle with similar features that achieves an overall efficiency of 64.0 percent. The gain in cycle efficiency that can be attributed to the improved fuel oxidation process is 1.4 percentage points. Compared to current high-efficiency gas turbine cycles, the high efficiency of both cycles studied therefore results mainly from the use of staged compression and expansion with intermediate cooling and reheating, respectively.

Issue Section:
Advanced Energy Systems
Topics:
Combustion, Gas turbines, Power stations, Recycling, Cycles, Exhaust systems, Fuels, Gases, Heat, Turbines, Compression, Cooling, Energy conversion, Heating, Methane, Oxidation, Thermodynamic power cycles
1.
Aspen, 1991, ASPEN PLUS™ Chemical Process Simulation Code, Aspen Technology Inc., Ten Canal Park, Cambridge MA.
2.
Bavaria Anlagenbau Gmbh, Fu¨rstenfeldbruck, Germany, 1990, BAVEX® plate type hybrid heat exchanger, company marketing documentation.
3.
Bolland
O.
,
1991
, “
A Comparative Evaluation of Advanced Combined Cycle Alternatives
,”
ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER
, Vol.
113
, pp.
190
–
197
.
4.
Day, W. H., and Rao, A. D., 1993, “FT4000 HAT With Natural Gas Fuel,” Turbomachinery International, Jan./Feb., pp. 22–29.
5.
Gordon, G., and McBride, B. J., 1976, “Computer Program for Calculation of Complex Chemical Equilibrium Compositions, Rocket Performance, Incident and Reflected Shocks, and Chapman-Jouguet Detonations,” NASA Sp-273, NASA Lewis Research Center.
6.
Hamann, B., and Joyce, J. S., 1989, “World’s Largest Gas Turbines for Ambarli Combined Cycle,” Modern Power Systems, May, pp. 61–74.
7.
Holt, N., 1991, “Gasification Power Plants: Highly Efficient Advanced Cycles,” EPRI Journal, Apr.–May, pp. 40–43.
8.
Kalina, A. I., 1983, “Combined Cycle and Waste-Heat Recovery Power Systems Based on a Novel Thermodyanmic Energy Cycle Utilizing Low-Temperature Heat for Power Generation,” ASME Paper No. 83-JPGC-GT-3.
9.
Kalina
A. I.
,
1984
, “
Combined Cycle System With Novel Bottoming Cycle
,”
ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER
, Vol.
112
, pp.
107
–
116
.
10.
Kalina, A. I., 1991, “Kalina Cycles and System for Direct-Fired Power Plants,” ASME Second Law Analysis—Industrial and Environmental Applications, ASME AES-Vol. 25/HTD-Vol. 191, pp. 41–47.
11.
Kalina, A. I., Leibowitz, H. M., Markus, D. W., and Pelletier, R. I., 1991, “Further Technical Aspects and Economics of a Utility-Size Kalina Bottoming Cycle,” ASME Paper No. 91-GT-365.
12.
Kalina, A. I., and Tribus, M., 1992, “Advances in Kalina Cycle Technology (1980–1991), “ presented at the Florence World Energy Research Symposium, Florence, Italy, June.
13.
Knoche, K. F., 1990, Visiting Professor at Thayer School of Engineering, Dartmouth College, personal communication.
14.
Matsuzaki, H., Shimomura, K., Fukuyama, Y., Araki, T., Ishii, J., Yamamoto, M., Shibuya, S., and Okuhara, I., 1992, “New Advanced Cooling Technology and Material of the 1500°C Class Gas Turbine,” ASME Paper No. 92-GT-240.
15.
Papalambros, X. X., and Wilde, Y. Y., 1988, Principles of Optimal Design, Cambridge University Press.
16.
Parks
W. P.
,
Ramey
R. R.
,
Rawlins
D. C.
,
Price
J. R.
, and
Van Roode
M.
,
1991
, “
Potential Applications of Structural Ceramic Composites in Gas Turbine
,”
ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER
, Vol.
113
, pp.
628
–
634
.
17.
Richter, H. J., and Knoche, K. F., 1983, “Reversibility of Combustion Processes,” Efficiency and Costing, Second Law Analysis of Processes, R. A. Gaggioli, ed., ACS Symposium Series 235, pp. 71–86.
18.
Rostrop-Nielsen, J. R., 1983, “Catalytic Steam Reforming,” Catalysis: Science & Technology, J. R. Anderson and M. Boudart, eds., Springer-Verlag, Berlin, Vol. 5, Ch. 1, pp. 1–117.
19.
Scha¨fer, B., 1991, “Energy Conversion Process,” B. E. Thesis, Thayer School of Engineering, Dartmouth College, NH.
20.
Wilson, D. G., 1984, The Design of High-Efficiency Turbomachinery and Gas Turbines, MIT Press, Cambridge, MA.
This content is only available via PDF.
Copyright © 1995
 by The American Society of Mechanical Engineers
You do not currently have access to this content.