Skip Nav Destination
Issues
May 1956
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Symposium on Design for and Operating Experience With Outdoor Power Plants: Introduction
Trans. ASME. May 1956, 78(4): 671.
doi: https://doi.org/10.1115/1.4013768
Topics:
Design
,
Power stations
Symposium on Design for and Operating Experience With Outdoor Power Plants: Outdoor-Type Steam-Electric Stations Early Types and Development
Trans. ASME. May 1956, 78(4): 671–673.
doi: https://doi.org/10.1115/1.4013769
Topics:
Design
,
Power stations
,
Steam
Symposium on Design for and Operating Experience With Outdoor Power Plants: Economic Factors in Design of Power-Station Enclosures
Trans. ASME. May 1956, 78(4): 673–675.
doi: https://doi.org/10.1115/1.4013770
Topics:
Design
,
Economics
,
Power stations
Symposium on Design for and Operating Experience With Outdoor Power Plants: Cost Data, Design Progress, and Experience Through Six Major Installations
Trans. ASME. May 1956, 78(4): 675–680.
doi: https://doi.org/10.1115/1.4013771
Topics:
Design
,
Power stations
Symposium on Design for and Operating Experience With Outdoor Power Plants: Adapting Outdoor Plants to Their Environment
Trans. ASME. May 1956, 78(4): 680–681.
doi: https://doi.org/10.1115/1.4013772
Topics:
Design
,
Power stations
Symposium on Design for and Operating Experience With Outdoor Power Plants: Survey of Equipment Placement in New Steam Central Stations—1953–1956
Trans. ASME. May 1956, 78(4): 681–683.
doi: https://doi.org/10.1115/1.4013773
Topics:
Design
,
Power stations
,
Steam
Symposium on Design for and Operating Experience With Outdoor Power Plants: Design and Experience With Outdoor Power Plants
Trans. ASME. May 1956, 78(4): 683–685.
doi: https://doi.org/10.1115/1.4013774
Topics:
Design
,
Power stations
Flow in Corners of Passages With Noncircular Cross Sections
Trans. ASME. May 1956, 78(4): 709–718.
doi: https://doi.org/10.1115/1.4013793
Laminar Pipe Flow With Injection and Suction Through a Porous Wall
Trans. ASME. May 1956, 78(4): 719–724.
doi: https://doi.org/10.1115/1.4013794
Topics:
Pipe flow
,
Suction
,
Pipes
,
Fluids
,
Friction
,
Boundary-value problems
,
Equations of motion
,
Flow (Dynamics)
,
Laminar flow
,
Navier-Stokes equations
Radiation Analysis by the Network Method
Trans. ASME. May 1956, 78(4): 725–735.
doi: https://doi.org/10.1115/1.4013795
Topics:
Radiation (Physics)
,
Heat transfer
,
Accounting
,
Energy transformation
,
Gases
,
Shapes
Self-Excited Vibrations of Systems With Two Degrees of Freedom
Trans. ASME. May 1956, 78(4): 737–747.
doi: https://doi.org/10.1115/1.4013798
Topics:
Degrees of freedom
,
Vibration
,
Cutting
A New Method of Evaluating Dynamic Response of Counterflow and Parallel-Flow Heat Exchangers
Trans. ASME. May 1956, 78(4): 749–757.
doi: https://doi.org/10.1115/1.4013802
Topics:
Dynamic response
,
Flow (Dynamics)
,
Heat exchangers
,
Frequency response
,
Transients (Dynamics)
,
Design
The Dynamic Response of Industrial Thermometers in Wells
Trans. ASME. May 1956, 78(4): 759–762.
doi: https://doi.org/10.1115/1.4013805
Topics:
Dynamic response
,
Thermometers
,
Wells
,
Capacitance
,
Heat transfer
Flow of a Compressible Fluid in a Thin Passage
Trans. ASME. May 1956, 78(4): 765–770.
doi: https://doi.org/10.1115/1.4013808
Topics:
Flow (Dynamics)
,
Fluids
,
Pressure
,
Weight (Mass)
,
Errors
,
Momentum
The Effect of Oil-Column Acoustic Resonance on Hydraulic Valve “Squeal”
Trans. ASME. May 1956, 78(4): 773–777.
doi: https://doi.org/10.1115/1.4013811
Topics:
Acoustics
,
Resonance
,
Valves
,
Oscillations
On the Maximum and Minimum Velocities and the Accelerations in Four-Link Mechanisms
Trans. ASME. May 1956, 78(4): 779–785.
doi: https://doi.org/10.1115/1.4013815
Long-Shoe Block Brake With Floating Anchor
Trans. ASME. May 1956, 78(4): 789–793.
doi: https://doi.org/10.1115/1.4013820
Topics:
Brakes
,
Design
,
Linings (Textiles)
,
Manufacturing
,
Wear
Determination of Radius of Curvature for Radial and Swinging-Follower Cam Systems
Trans. ASME. May 1956, 78(4): 795–800.
doi: https://doi.org/10.1115/1.4013823
Determination of Pressure Angles for Swinging-Follower Cam Systems
Trans. ASME. May 1956, 78(4): 803–806.
doi: https://doi.org/10.1115/1.4013826
The Relation Between Grinding Conditions and Thermal Damage in the Workpiece
Trans. ASME. May 1956, 78(4): 807–811.
doi: https://doi.org/10.1115/1.4013827
Topics:
Damage
,
Grinding
,
Heat
,
Cutting
,
Durability
,
Fracture (Materials)
,
Sharpening
,
Temperature
Measuring the Thermal Diffusivity of Metals at Elevated Temperatures
Trans. ASME. May 1956, 78(4): 813–819.
doi: https://doi.org/10.1115/1.4013831
Topics:
Metals
,
Temperature
,
Thermal diffusivity
,
Aluminum
,
Carbon
,
Copper
,
Fracture toughness
,
Heat losses
,
Heating and cooling
,
Phase shift
On the Relations Between Various Laboratory Fracture Tests
Trans. ASME. May 1956, 78(4): 823–833.
doi: https://doi.org/10.1115/1.4013835
Topics:
Disks
,
Fracture (Materials)
,
Fracture (Process)
,
Notch testing
The Effects of High-Frequency Vibrations in Grinding
Trans. ASME. May 1956, 78(4): 837–844.
doi: https://doi.org/10.1115/1.4013840
Topics:
Grinding
,
Vibration
,
Grinding wheels
,
Chatter
,
Finishes
,
Fracture (Materials)
,
Noise (Sound)
,
Temperature
,
Tool grinders
,
Ultrasonic transducers
The Role of Chip Thickness in Grinding
Trans. ASME. May 1956, 78(4): 847–857.
doi: https://doi.org/10.1115/1.4013846
Inorganic Grinding Fluids for Titanium Alloys
Trans. ASME. May 1956, 78(4): 861–867.
doi: https://doi.org/10.1115/1.4013851
Topics:
Fluids
,
Grinding
,
Titanium alloys
,
Aluminum
,
Ions
,
Titanium
,
Chain
,
Corrosion protection
,
Finishing
,
Grinding wheels
Selective Silica Carry-Over in Steam
Trans. ASME. May 1956, 78(4): 869–873.
doi: https://doi.org/10.1115/1.4013854
Topics:
Steam
,
Water
,
Boilers
,
Radioactive tracers
Demineralized Make-Up for 1250-PSI Installation at East Millinocket Mill of Great Northern Paper Company
Trans. ASME. May 1956, 78(4): 875–879.
doi: https://doi.org/10.1115/1.4013857
Topics:
Boilers
,
Feedwater
,
Flow (Dynamics)
,
Industrial capacity
,
Newsprint
,
Steam
,
Thermal power stations
,
Turbines
,
Turbogenerators
,
Water treatment
Power Removal from Boiling Nuclear Reactors
Trans. ASME. May 1956, 78(4): 881–892.
doi: https://doi.org/10.1115/1.4013860
Topics:
Boiling
,
Nuclear reactors
,
Coolants
,
Density
,
Electrical resistance
,
Fluid density
,
Fuels
,
Heating
,
Power density
,
Vapors
Discussions and Closures
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 685.
doi: https://doi.org/10.1115/1.4013775
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 685–686.
doi: https://doi.org/10.1115/1.4013776
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 686.
doi: https://doi.org/10.1115/1.4013777
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 686–687.
doi: https://doi.org/10.1115/1.4013778
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 687.
doi: https://doi.org/10.1115/1.4013779
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 688.
doi: https://doi.org/10.1115/1.4013780
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 688–689.
doi: https://doi.org/10.1115/1.4013781
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 689–691.
doi: https://doi.org/10.1115/1.4013782
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 691.
doi: https://doi.org/10.1115/1.4013783
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 691–692.
doi: https://doi.org/10.1115/1.4013784
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 692–693.
doi: https://doi.org/10.1115/1.4013785
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 693–694.
doi: https://doi.org/10.1115/1.4013786
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 694–695.
doi: https://doi.org/10.1115/1.4013787
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 695.
doi: https://doi.org/10.1115/1.4013788
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 695–697.
doi: https://doi.org/10.1115/1.4013789
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 697–700.
doi: https://doi.org/10.1115/1.4013790
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 701–702.
doi: https://doi.org/10.1115/1.4013791
Topics:
Design
,
Power stations
Discussion: “Symposium on Design for and Operating Experience With Outdoor Power Plants” (Landis, J. N., Elliott, Louis, Argue, F. W., Duffy, E. C., Friend, W. F., Skrotzki, B. G. A., and Gaffert, G. A., 1956, Trans. ASME, 78, pp. 671–685)
Trans. ASME. May 1956, 78(4): 703–707.
doi: https://doi.org/10.1115/1.4013792
Topics:
Design
,
Power stations
Discussion: “Radiation Analysis by the Network Method” (Oppenheim, A. K., 1956, Trans. ASME, 78, pp. 725–735)
Trans. ASME. May 1956, 78(4): 735.
doi: https://doi.org/10.1115/1.4013796
Topics:
Radiation (Physics)
Closure to “Discussion of ‘Radiation Analysis by the Network Method’” (1956, Trans. ASME, 78, p. 735)
Trans. ASME. May 1956, 78(4): 735.
doi: https://doi.org/10.1115/1.4013797
Topics:
Radiation (Physics)
Discussion: “Self-Excited Vibrations of Systems With Two Degrees of Freedom” (Saljé, Ernst, 1956, Trans. ASME, 78, pp. 737–747)
Trans. ASME. May 1956, 78(4): 747.
doi: https://doi.org/10.1115/1.4013799
Topics:
Degrees of freedom
,
Vibration
Discussion: “Self-Excited Vibrations of Systems With Two Degrees of Freedom” (Saljé, Ernst, 1956, Trans. ASME, 78, pp. 737–747)
Trans. ASME. May 1956, 78(4): 747–748.
doi: https://doi.org/10.1115/1.4013800
Topics:
Degrees of freedom
,
Vibration
Closure to “Discussions of ‘Self-Excited Vibrations of Systems With Two Degrees of Freedom’” (1956, Trans. ASME, 78, pp. 747–748)
Trans. ASME. May 1956, 78(4): 748.
doi: https://doi.org/10.1115/1.4013801
Topics:
Vibration
Discussion: “A New Method of Evaluating Dynamic Response of Counterflow and Parallel-Flow Heat Exchangers” (Paynter, H. M., and Takahashi, Yasundo, 1956, Trans. ASME, 78, pp. 749–757)
Trans. ASME. May 1956, 78(4): 757.
doi: https://doi.org/10.1115/1.4013803
Topics:
Dynamic response
,
Flow (Dynamics)
,
Heat exchangers
Closure to “Discussion of ‘A New Method of Evaluating Dynamic Response of Counterflow and Parallel-Flow Heat Exchangers’” (1956, Trans. ASME, 78, p. 757)
Trans. ASME. May 1956, 78(4): 757–758.
doi: https://doi.org/10.1115/1.4013804
Topics:
Dynamic response
,
Flow (Dynamics)
,
Heat
Discussion: “The Dynamic Response of Industrial Thermometers in Wells” (Linahan, T. C., 1956, Trans. ASME, 78, pp. 759–762)
Trans. ASME. May 1956, 78(4): 762–763.
doi: https://doi.org/10.1115/1.4013806
Topics:
Dynamic response
,
Thermometers
,
Wells
Closure to “Discussion of ‘The Dynamic Response of Industrial Thermometers in Wells’” (1956, Trans. ASME, 78, pp. 762–763)
Trans. ASME. May 1956, 78(4): 763.
doi: https://doi.org/10.1115/1.4013807
Topics:
Dynamic response
,
Thermometers
Discussion: “Flow of a Compressible Fluid in a Thin Passage” (Grinnell, S. K., 1956, Trans. ASME, 78, pp. 765–770)
Trans. ASME. May 1956, 78(4): 770–771.
doi: https://doi.org/10.1115/1.4013809
Topics:
Flow (Dynamics)
,
Fluids
Closure to “Discussion of ‘Flow of a Compressible Fluid in a Thin Passage’” (1956, Trans. ASME, 78, pp. 770–771)
Trans. ASME. May 1956, 78(4): 771.
doi: https://doi.org/10.1115/1.4013810
Topics:
Flow (Dynamics)
,
Fluids
Discussion: “The Effect of Oil-Column Acoustic Resonance on Hydraulic Valve “Squeal”” (Ainsworth, F. W., 1956, Trans. ASME, 78, pp. 773–777)
Trans. ASME. May 1956, 78(4): 777–778.
doi: https://doi.org/10.1115/1.4013813
Discussion: “Long-Shoe Block Brake With Floating Anchor” (Spotts, M. F., 1956, Trans. ASME, 78, pp. 789–793)
Trans. ASME. May 1956, 78(4): 793–794.
doi: https://doi.org/10.1115/1.4013821
Topics:
Brakes
Closure to “Discussion of ‘Long-Shoe Block Brake With Floating Anchor’” (1956, Trans. ASME, 78, pp. 793–794)
Trans. ASME. May 1956, 78(4): 794.
doi: https://doi.org/10.1115/1.4013822
Topics:
Brakes
Discussion: “Determination of Radius of Curvature for Radial and Swinging-Follower Cam Systems” and “Determination of Pressure Angles for Swinging-Follower Cam Systems” (Kloomok, Martin, and Muffley, R. V., 1956, Trans. ASME, 78, pp. 795–800 and 803–806)
Trans. ASME. May 1956, 78(4): 801–802.
doi: https://doi.org/10.1115/1.4013824
Topics:
Pressure
Closure to “Discussion of ‘Determination of Radius of Curvature for Radial and Swinging-Follower Cam Systems’ and ‘Determination of Pressure Angles for Swinging-Follower Cam Systems’” (1956, Trans. ASME, 78, pp. 801–802)
Trans. ASME. May 1956, 78(4): 802.
doi: https://doi.org/10.1115/1.4013825
Topics:
Pressure
Discussion: “The Relation Between Grinding Conditions and Thermal Damage in the Workpiece” (Hahn, R. S., 1956, Trans. ASME, 78, pp. 807–811)
Trans. ASME. May 1956, 78(4): 811–812.
doi: https://doi.org/10.1115/1.4013829
Discussion: “Measuring the Thermal Diffusivity of Metals at Elevated Temperatures” (El-Hifni, M. A., and Chao, B. T., 1956, Trans. ASME, 78, pp. 813–819)
Trans. ASME. May 1956, 78(4): 820.
doi: https://doi.org/10.1115/1.4013832
Topics:
Metals
,
Temperature
,
Thermal diffusivity
Discussion: “Measuring the Thermal Diffusivity of Metals at Elevated Temperatures” (El-Hifni, M. A., and Chao, B. T., 1956, Trans. ASME, 78, pp. 813–819)
Trans. ASME. May 1956, 78(4): 820.
doi: https://doi.org/10.1115/1.4013833
Topics:
Metals
,
Temperature
,
Thermal diffusivity
Closure to “Discussions of ‘Measuring the Thermal Diffusivity of Metals at Elevated Temperatures’” (1956, Trans. ASME, 78, p. 820)
Trans. ASME. May 1956, 78(4): 820–821.
doi: https://doi.org/10.1115/1.4013834
Topics:
Metals
,
Thermal diffusivity
Discussion: “On the Relations Between Various Laboratory Fracture Tests” (Lape, E. M., and Lubahn, J. D., 1956, Trans. ASME, 78, pp. 823–833)
Trans. ASME. May 1956, 78(4): 833–834.
doi: https://doi.org/10.1115/1.4013836
Topics:
Fracture (Materials)
,
Fracture (Process)
Discussion: “On the Relations Between Various Laboratory Fracture Tests” (Lape, E. M., and Lubahn, J. D., 1956, Trans. ASME, 78, pp. 823–833)
Trans. ASME. May 1956, 78(4): 834.
doi: https://doi.org/10.1115/1.4013837
Topics:
Fracture (Materials)
,
Fracture (Process)
Discussion: “On the Relations Between Various Laboratory Fracture Tests” (Lape, E. M., and Lubahn, J. D., 1956, Trans. ASME, 78, pp. 823–833)
Trans. ASME. May 1956, 78(4): 834–835.
doi: https://doi.org/10.1115/1.4013838
Topics:
Fracture (Materials)
,
Fracture (Process)
Closure to “Discussions of ‘On the Relations Between Various Laboratory Fracture Tests’” (1956, Trans. ASME, 78, pp. 833–835)
Trans. ASME. May 1956, 78(4): 835.
doi: https://doi.org/10.1115/1.4013839
Topics:
Fracture (Materials)
,
Fracture (Process)
Discussion: “The Effects of High-Frequency Vibrations in Grinding” (Colwell, L. V., 1956, Trans. ASME, 78, pp. 837–844)
Trans. ASME. May 1956, 78(4): 844–845.
doi: https://doi.org/10.1115/1.4013841
Discussion: “The Effects of High-Frequency Vibrations in Grinding” (Colwell, L. V., 1956, Trans. ASME, 78, pp. 837–844)
Trans. ASME. May 1956, 78(4): 845.
doi: https://doi.org/10.1115/1.4013842
Discussion: “The Effects of High-Frequency Vibrations in Grinding” (Colwell, L. V., 1956, Trans. ASME, 78, pp. 837–844)
Trans. ASME. May 1956, 78(4): 845.
doi: https://doi.org/10.1115/1.4013843
Discussion: “The Effects of High-Frequency Vibrations in Grinding” (Colwell, L. V., 1956, Trans. ASME, 78, pp. 837–844)
Trans. ASME. May 1956, 78(4): 845–846.
doi: https://doi.org/10.1115/1.4013844
Closure to “Discussions of ‘The Effects of High-Frequency Vibrations in Grinding’” (1956, Trans. ASME, 78, pp. 844–846)
Trans. ASME. May 1956, 78(4): 846.
doi: https://doi.org/10.1115/1.4013845
Topics:
Vibration
Discussion: “The Role of Chip Thickness in Grinding” (Reichenbach, G. S., Mayer, J. E., Kalpakcioglu, S., and Shaw, M. C., 1956, Trans. ASME, 78, pp. 847–857)
Trans. ASME. May 1956, 78(4): 857–858.
doi: https://doi.org/10.1115/1.4013847
Topics:
Grinding
Discussion: “The Role of Chip Thickness in Grinding” (Reichenbach, G. S., Mayer, J. E., Kalpakcioglu, S., and Shaw, M. C., 1956, Trans. ASME, 78, pp. 847–857)
Trans. ASME. May 1956, 78(4): 858.
doi: https://doi.org/10.1115/1.4013848
Topics:
Grinding
Discussion: “The Role of Chip Thickness in Grinding” (Reichenbach, G. S., Mayer, J. E., Kalpakcioglu, S., and Shaw, M. C., 1956, Trans. ASME, 78, pp. 847–857)
Trans. ASME. May 1956, 78(4): 858–859.
doi: https://doi.org/10.1115/1.4013849
Topics:
Grinding
Closure to “Discussions of ‘The Role of Chip Thickness in Grinding’” (1956, Trans. ASME, 78, pp. 857–859)
Trans. ASME. May 1956, 78(4): 859.
doi: https://doi.org/10.1115/1.4013850
Discussion: “Inorganic Grinding Fluids for Titanium Alloys” (Shaw, M. C., and Yang, C. T., 1956, Trans. ASME, 78, pp. 861–867)
Trans. ASME. May 1956, 78(4): 867–868.
doi: https://doi.org/10.1115/1.4013852
Topics:
Fluids
,
Grinding
,
Titanium alloys
Closure to “Discussion of ‘Inorganic Grinding Fluids for Titanium Alloys’” (1956, Trans. ASME, 78, pp. 867–868)
Trans. ASME. May 1956, 78(4): 868.
doi: https://doi.org/10.1115/1.4013853
Discussion: “Selective Silica Carry-Over in Steam” (Coulter, E. E., Pirsh, E. A., and Wagner, Jr., E. J., 1956, Trans. ASME, 78, pp. 869–873)
Trans. ASME. May 1956, 78(4): 873.
doi: https://doi.org/10.1115/1.4013855
Topics:
Steam
Closure to “Discussion of ‘Selective Silica Carry-Over in Steam’” (1956, Trans. ASME, 78, p. 873)
Trans. ASME. May 1956, 78(4): 873.
doi: https://doi.org/10.1115/1.4013856
Email alerts
RSS Feeds
A Multi-GPU Based Real-Time Large-Eddy Simulation of Urban Wind in Seoul
J. Fluids Eng (July 2024)
Boundary-Layer Agitator for Advanced Convective Mixing
J. Fluids Eng (July 2024)
Passively Enhanced Vortex-Induced Vibration Response of Side-by-Side Cylinders in Turbulent Flow
J. Fluids Eng (July 2024)
Morphological Features of a Splashing Drop Extracted Using Explainable AI
J. Fluids Eng (July 2024)