Large-scale power generation and delivery to remote locales is often prohibitively expensive, due in part to the excessive costs of delivering the materials required to build the necessary infrastructure. In addition, these facilities can have deleterious effects on the local ecosystem. With their reduced physical and environmental footprints, small-scale run-of-river hydroelectric facilities capable of generating power from the modest head provided by streams and rivers are attractive alternatives. Concern remains, however, for the health and safety of the local fish population in these waterways. In order to further reduce the impact of small-scale axial turbine-based hydroelectric facilities on the local fauna, AlfaStar Hydro has proposed a vaneless swirl injector to replace traditional inlet guide vanes (IGVs), as well as a “fish-friendly” rotor designed to rotate relatively slowly and with wide passages between the blades to enable the safe egress of fish drawn into the turbine. Herein, we perform a numerical study of the flow development in the vaneless swirl injector as a function of the number of revolutions and the pitch angle of the rifling in the absence of a rotor toward maximizing turbine efficiency. Swirl intensity, pressure loss in the injector, and axial and circumferential velocity distributions are incorporated as performance metrics into an objective function to optimize the casing design. Results indicate that the number of revolutions of the injector has considerably less influence on overall injector performance than does pitch angle. The casing with the best predicted performance consists of four revolutions at a pitch angle of 25 deg.
Skip Nav Destination
Article navigation
September 2017
Research-Article
Design Optimization of a Vaneless “Fish-Friendly” Swirl Injector for Small Water Turbines
Ajith Airody,
Ajith Airody
Mechanical and Mechatronics Engineering,
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: aairody@uwaterloo.ca
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: aairody@uwaterloo.ca
Search for other works by this author on:
Sean D. Peterson
Sean D. Peterson
Mechanical and Mechatronics Engineering,
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: peterson@mme.uwaterloo.ca
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: peterson@mme.uwaterloo.ca
Search for other works by this author on:
Ajith Airody
Mechanical and Mechatronics Engineering,
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: aairody@uwaterloo.ca
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: aairody@uwaterloo.ca
David De Montmorency
Sean D. Peterson
Mechanical and Mechatronics Engineering,
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: peterson@mme.uwaterloo.ca
University of Waterloo,
200 University Avenue West,
Waterloo, ON N2L 3G1, Canada
e-mail: peterson@mme.uwaterloo.ca
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received February 3, 2016; final manuscript received April 6, 2017; published online June 28, 2017. Assoc. Editor: Elias Balaras.
J. Fluids Eng. Sep 2017, 139(9): 091105 (6 pages)
Published Online: June 28, 2017
Article history
Received:
February 3, 2016
Revised:
April 6, 2017
Citation
Airody, A., De Montmorency, D., and Peterson, S. D. (June 28, 2017). "Design Optimization of a Vaneless “Fish-Friendly” Swirl Injector for Small Water Turbines." ASME. J. Fluids Eng. September 2017; 139(9): 091105. https://doi.org/10.1115/1.4036667
Download citation file:
Get Email Alerts
Cited By
Large Eddy Simulation of Separated Flows on Unconventionally Coarse Grids
J. Fluids Eng (September 2024)
Related Articles
Coupled Multipoint Shape Optimization of Runner and Draft Tube of Hydraulic Turbines
J. Fluids Eng (November,2015)
Numerical Modeling of a Wave Turbine and Estimation of Shaft Work
J. Fluids Eng (October,2018)
On the History, Science, and Technology Included in the Moody Diagram
J. Fluids Eng (March,2017)
Modeling the Flow of Non-Newtonian Fluids Through Sharp
Orifices
J. Fluids Eng (May,2018)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Introduction
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition