One of the forces that act on a pig while in operation in a pipeline is that due to the layer of wax deposited on the pipeline wall. Therefore, if the motion of a pig or its cleaning efficiency are to be determined, this resistive force must be known as a function of the relevant parameters. The goal of this paper is to present a procedure for evaluating this force in situations of engineering interest. In essence, the procedure consists of the following steps: (i) determine the wax shear strength according to an experimental procedure developed for this purpose; (ii) from finite-element results, obtain the maximum stress in wax; (iii) with the foregoing information, calculate the pressure required for the pig to cause a maximum stress on wax equal to its shear strength. This pressure value is the threshold below which no wax removed can occur, according to the present simple approach. In this paper, each of these steps is described in detail and exemplified.

Issue Section:
Technical Papers
Topics:
Finite element analysis, Pipelines, Pressure, Shear strength, Stress
1.
Addison, G. E., 1984, “Paraffin Control More Cost-Effective,” Eastern Regional Meeting of the AIME Society of Petroleum Engineers, SPE Report No. 13391, 203–210, Charleston, WV.
2.
Bern
P. A.
,
Withers
V. R.
, and
Roger
J. R.
,
1980
, “
Wax Deposition in Crude Oil Pipelines
,”
Proceedings, European Offshore Petroleum Conference and Exhibition
, London, U.K., Vol.
1
, pp.
571
–
578
.
3.
Brown, T. S., Niesen, V. G., and Erickson, D. D., 1993, “Measurement and Prediction of the Kinetics of Paraffin Deposition,” SPE Report No. 26548, pp. 353–368.
4.
Burger
E. D.
,
Perkins
T. K.
, and
Striegler
J. H.
,
1981
, “
Studies of Wax Deposition in the Trans Alaska Pipeline
,”
SPE Journal of Petroleum Technology
, Vol.
33
(
6
), pp.
1075
–
1086
.
5.
Hsu
J. J. C.
, and
Brubaker
J. P.
,
1995
, “
Wax Deposition Scale-Up Modeling for Waxy Production Lines
,”
Proceedings, Offshore Technology Conference
, Houston, TX, Vol.
2
, pp.
731
–
740
.
6.
Juvinall, R. C., 1967, Enginneering Considerations of Stress, Strain, and Strength, McGraw-Hill, New York, NY.
7.
Kershaw
C. F.
, and
Kershaw
B. G.
,
1997
, “
Scale Removal in Pipelines
,”
Journal of Offshore Technology
, Vol.
5
(
4
), pp.
37
–
38
.
8.
Lino, A. C. F., Mastrangelo, C., Pereira, F. B., and Gomes, M. G. F., 1997, “Engineering of the Pigging Equipment for Subsea Systems in Campos Basin,” Proceedings, 29th Annual Offshore Technology Conference, Houston, TX, Vol. 4.
9.
Majeed
A.
,
Bringedal
B.
, and
Overa
S.
,
1990
, “
Model Calculates Wax Deposition for North Sea Oils
,”
Oil and Gas Journal
, Vol.
88
(
25
), pp.
63
–
69
.
10.
Ribeiro, F. S., 1996, “Paraffin Deposition in Petroleum Pipelines” (in Portuguese), M.S. thesis, Pontifi´cia Universidade Cato´lica do Rio de Janeiro, Rio de Janeiro, Brazil.
11.
Ribeiro
F. S.
,
Souza Mendes
P. R.
, and
Braga
S. L.
,
1997
, “
Obstruction of Pipelines Due to Paraffin Deposition During the Flow of Crude Oils
,”
International Journal of Heat Mass Transfer
, Vol.
40
(
18
), pp.
4219
–
4328
.
12.
Singh
P.
, and
Fogler
H. S.
,
1998
, “
Fused Chemical Reactions: The Use of Dispersion to Delay Reaction Time in Tubular Reactors
,”
Industrial & Engineering Chemistry Research
, Vol.
37
(
6
), pp.
2203
–
2207
.
13.
Souza Mendes
P. R.
, and
Braga
S. L.
,
1996
, “
Gradual Obstruction of Circular Conduits During the Flow of Waxy Crude Oils
,”
ASME Journal of Fluids Engineering
, Vol.
118
, pp.
722
–
728
.
This content is only available via PDF.
Copyright © 1999
 by The American Society of Mechanical Engineers
You do not currently have access to this content.