This paper presents results for the minimization of fuel consumption in a batch furnace. Several different criteria are used and minimized with respect to time-dependent process and control variables. As would be expected, the results show that globally there is no significant difference between the solutions found (i.e., the same minimum fuel consumption results) when the choice of criterion is either energy, exergy, exergy destruction, entropy creation of the system and entropy creation of the system plus environment. However, the specific details or local results of each solution (i.e., the heating strategies) are, in fact, quite different. These differences cannot simply be attributed to numerical error (round-off and truncation). What they show is that multiple optimum strategies satisfy the same global optimum. The advantage of one over the other may simply be that from a practical standpoint some are easier to implement than others. Nonetheless, regardless of the strategy used, employing an optimum one raises the possibility of significant reductions in overall fuel consumption in these and other types of furnaces.

Issue Section:
Technical Papers
Topics:
Fuels, Furnaces, Fuel consumption, Entropy, Exergy, Errors, Heating
1.
Ames, W. F., 1977, Numerical Methods for Partial Differential Equations, Computer Science & Mathematics Series, W. Rheinboldt, ed., Application of Mathematics Series, A. Jeffrey ed., Academic Press, 2nd Edition, New York, NY.
2.
Bejan, A., 1996, Entropy Generation Minimization, CRC Press, Boca Raton, FL.
3.
Carnahan, B., Luther, H. A., and Wilkes, J. O., 1969, Applied Numerical Methods, John Wiley & Sons, New York, NY.
4.
El-Sayed
Y. M.
,
1996
,
ASME Journal of Engineering for Gas Turbines and Power
, Vol.
118
, p.
693
693
.
5.
Evans
R. B.
, and
von Spakovsky
M. R.
,
1993
,
ASME JOURNAL OF ENERGY RESOURCES TECHNOLOGY
, Vol.
115
, pp.
93
–
99
.
6.
Frangopoulos
C. A.
,
1994
,
Energy: The International Journal
, Vol.
19
, No.
3
, pp.
323
–
342
.
7.
Gaggioli
R. A.
, and
El-Sayed
Y. M.
,
1987
,
Proceedings, IVth International Symposium on Second Law Analysis of Thermal Systems
, Rome, Italy, ASME Vol.
1
, pp.
59
–
73
.
8.
Geskin, E. S., 1966, “The Application of Variational Methods to the Optimal Heating of Metals,” doctoral dissertation (in Russian), Moscow Institute of Steel and Alloys, Russia.
9.
Geskin, E. S., 1980, “The Optimization of Energy Consumption in Batch Furnaces,” The Metallurgical Society of the AIME, TMS Paper Selection, Pa. A80-11, Chicago, IL.
10.
Geskin, E. S., Youssef, M. A., and Kiper, A. M., 1989, “Optimization of Fuel Utilization in Continuous Heating Furnaces,” Thermodynamic Analysis and Improvement of Energy Systems, ed., C. Ruixian and M. J. Moran, International Academic Publishers, Beijing, China.
11.
Pontryagin, L. S., Bolyanskii, V. G., Gamkrelidze, R. V., and Mishchenko, E. F., 1964, The Mathematical Theory of Optimal Processes, transl. from Russian, D. E. Brown, Pergamon Press, Oxford, England.
12.
Tegner, J., 1994, “Shooting Method Based Computer Program,” private communication, IMEHF, De´pt. de Ge`nie Me`canique, E´cole Polytechnique Fe´de´rale, Lausanne, Switzerland.
13.
Tsatsaronis
G.
, and
Pisa
J.
,
1994
,
Energy: The International Journal
, Vol.
19
, No.
3
, pp.
287
–
321
.
14.
Valero
A.
,
Serra
L.
,
Lozano
M. A.
, and
Torres
C.
,
1994
,
Energy: The International Journal
, Vol.
19
, No.
3
, pp.
365
–
381
.
15.
von Spakovsky
M. R.
,
1994
,
Energy: The International Journal
, Vol.
19
, No.
3
, pp.
343
–
364
.
16.
von Spakovsky
M. R.
, and
Evans
R. B.
,
1993
,
ASME JOURNAL OF ENERGY RESOURCES TECHNOLOGY
, Vol.
115
, pp.
86
–
92
.
17.
von Spakovsky, M. R., and Geskin E., 1995, Workshop on Thermodynamics and Energy Systems: Towards the 21st Century, ASME, University di Roma, Rome, Italy, pp. 335–348.
18.
Youssef, M. A., Kiper, A. M., and Geskin, E. S., 1987, “Optimal Control of Energy Utilization in Heating Furnaces,” The Metallurgical Society of the AIME, TMS Pa. A87-27, CO.
19.
Zebib, A., 1994, “Newton Linearization Method Based Computer Program,” private communication, Department of Mechanical and Aero Engineering, Rutgers University, NJ.
This content is only available via PDF.
Copyright © 1998
 by The American Society of Mechanical Engineers
You do not currently have access to this content.