Control problems in dynamic systems require an optimal selection of input trajectories and system parameters. In this paper, a novel procedure for optimization of a linear dynamic system is proposed that simultaneously solves the parameter design problem and the optimal control problem using a specific system state transformation. Also, the proposed procedure includes structural design constraints within the control system. A direct optimal control method is also examined to compare it with the proposed method. The limitations and advantages of both methods are discussed in terms of the number of states and inputs. Consequently, linear dynamic system examples are optimized under various constraints and the merits of the proposed method are examined.
Skip Nav Destination
Article navigation
January 2014
Research-Article
Parameter Design in Optimal Control Problems for Linear Dynamic Systems Using a Canonical Form
Ui-Jin Jung,
Ui-Jin Jung
Department of Mechanical Engineering,
e-mail: christmas@hanyang.ac.kr
Hanyang University
,Seoul
, South Korea
, 133-791e-mail: christmas@hanyang.ac.kr
Search for other works by this author on:
Gyung-Jin Park,
Gyung-Jin Park
Professor
Department of Mechanical Engineering,
e-mail: gjpark@hanyang.ac.kr
Department of Mechanical Engineering,
Hanyang University
,Ansan
, South Korea
, 426-791e-mail: gjpark@hanyang.ac.kr
Search for other works by this author on:
Sunil K. Agrawal
Sunil K. Agrawal
1
Professor
Department of Mechanical Engineering,
e-mail: Sunil.Agrawal@columbia.edu
Department of Mechanical Engineering,
Columbia University
,New York, NY 10027
e-mail: Sunil.Agrawal@columbia.edu
1Corresponding author.
Search for other works by this author on:
Ui-Jin Jung
Department of Mechanical Engineering,
e-mail: christmas@hanyang.ac.kr
Hanyang University
,Seoul
, South Korea
, 133-791e-mail: christmas@hanyang.ac.kr
Gyung-Jin Park
Professor
Department of Mechanical Engineering,
e-mail: gjpark@hanyang.ac.kr
Department of Mechanical Engineering,
Hanyang University
,Ansan
, South Korea
, 426-791e-mail: gjpark@hanyang.ac.kr
Sunil K. Agrawal
Professor
Department of Mechanical Engineering,
e-mail: Sunil.Agrawal@columbia.edu
Department of Mechanical Engineering,
Columbia University
,New York, NY 10027
e-mail: Sunil.Agrawal@columbia.edu
1Corresponding author.
Contributed by the Dynamic Systems Division of ASME for publication in the Journal of Dynamic Systems, Measurement, and Control. Manuscript received October 27, 2011; final manuscript received July 22, 2013; published online October 15, 2013. Assoc. Editor: Nader Jalili.
J. Dyn. Sys., Meas., Control. Jan 2014, 136(1): 011014 (8 pages)
Published Online: October 15, 2013
Article history
Received:
October 27, 2011
Revision Received:
July 22, 2013
Citation
Jung, U., Park, G., and Agrawal, S. K. (October 15, 2013). "Parameter Design in Optimal Control Problems for Linear Dynamic Systems Using a Canonical Form." ASME. J. Dyn. Sys., Meas., Control. January 2014; 136(1): 011014. https://doi.org/10.1115/1.4025455
Download citation file:
58
Views
Get Email Alerts
Cited By
Offset-Free Koopman Model Predictive Control of Thermal Comfort Regulation for A VRF-DOAS Combined System
J. Dyn. Sys., Meas., Control
Rejection of Sinusoidal Disturbances With Unknown Slowly Time-Varying Frequencies for Linear Time-Varying Systems
J. Dyn. Sys., Meas., Control (July 2024)
Using Control Barrier Functions to Incorporate Observability: Application to Range-Based Target Tracking
J. Dyn. Sys., Meas., Control (July 2024)
Gas Path Fault Diagnosis of Turboshaft Engine Based on Novel Transfer Learning Methods
J. Dyn. Sys., Meas., Control (May 2024)
Related Articles
A Switching Scheme for Mixed PZT-Based/Jet Thrusters Control of a Large Flexible Structure
J. Dyn. Sys., Meas., Control (December,2001)
Using Constrained Bilinear Quadratic Regulator for the Optimal Semi-Active Control Problem
J. Dyn. Sys., Meas., Control (November,2017)
Adjoint-Based Optimization Procedure for Active Vibration Control of Nonlinear Mechanical Systems
J. Dyn. Sys., Meas., Control (August,2017)
Minimum Move-Vibration Control for Flexible Structures
J. Dyn. Sys., Meas., Control (May,2008)
Related Proceedings Papers
Related Chapters
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution
Research on Energy-Saving Optimal Control for Trains in a Following Operation under a Moving Autoblock System Based on GA
International Conference on Computer Engineering and Technology, 3rd (ICCET 2011)
An Optimal Control Strategy for Water-Cooled Direct Expansion System in Real-World Application
International Conference on Measurement and Control Engineering 2nd (ICMCE 2011)