The general formulation for the milling chatter prediction developed in Part I of the paper is applied to common milling systems. Three cases are considered: a workpiece with single-degree-of-freedom, a face milling cutter with two-degree-of-freedom, and peripheral milling of a cantilevered thin web. The general milling stability formulation is further simplified for the less complicated models. For each case, an analytical expression which explicitly relate the chatter limit to the milling conditions and tool-workpiece dynamics are derived. The analytical predictions are compared with numerical and time domain solutions proposed by previous research. It is shown that the proposed method can accurately predict the chatter limits in milling and thus eliminates the time consuming numerical solutions.
Skip Nav Destination
Article navigation
March 1998
Technical Papers
Analytical Prediction of Chatter Stability in Milling—Part II: Application of the General Formulation to Common Milling Systems
E. Budak,
E. Budak
Department of Mechanical Engineering, The University of British Columbia, Vancouver, B.C., Canada V6T 1Z4
Search for other works by this author on:
Y. Altintas¸
Y. Altintas¸
Department of Mechanical Engineering, The University of British Columbia, Vancouver, B.C., Canada V6T 1Z4
Search for other works by this author on:
E. Budak
Department of Mechanical Engineering, The University of British Columbia, Vancouver, B.C., Canada V6T 1Z4
Y. Altintas¸
Department of Mechanical Engineering, The University of British Columbia, Vancouver, B.C., Canada V6T 1Z4
J. Dyn. Sys., Meas., Control. Mar 1998, 120(1): 31-36 (6 pages)
Published Online: March 1, 1998
Article history
Received:
January 4, 1995
Online:
December 3, 2007
Connected Content
This is a companion to:
Analytical Prediction of Chatter Stability in Milling—Part I: General Formulation
Citation
Budak, E., and Altintas¸, Y. (March 1, 1998). "Analytical Prediction of Chatter Stability in Milling—Part II: Application of the General Formulation to Common Milling Systems." ASME. J. Dyn. Sys., Meas., Control. March 1998; 120(1): 31–36. https://doi.org/10.1115/1.2801318
Download citation file:
Get Email Alerts
Offset-Free Koopman Model Predictive Control of Thermal Comfort Regulation for A VRF-DOAS Combined System
J. Dyn. Sys., Meas., Control
Rejection of Sinusoidal Disturbances With Unknown Slowly Time-Varying Frequencies for Linear Time-Varying Systems
J. Dyn. Sys., Meas., Control (July 2024)
Using Control Barrier Functions to Incorporate Observability: Application to Range-Based Target Tracking
J. Dyn. Sys., Meas., Control (July 2024)
Gas Path Fault Diagnosis of Turboshaft Engine Based on Novel Transfer Learning Methods
J. Dyn. Sys., Meas., Control (May 2024)
Related Articles
Analytical Prediction of the Critical Depth of Cut and Worst Spindle Speeds for Chatter in End Milling
J. Manuf. Sci. Eng (February,2014)
A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram
J. Manuf. Sci. Eng (April,2014)
Time Domain Study on the Construction Mechanism of Milling Stability Lobe Diagrams With Multiple Modes
J. Manuf. Sci. Eng (February,2022)
Effects of Varying Dynamics of Flexible Workpieces in Milling Operations
J. Manuf. Sci. Eng (January,2020)
Related Chapters
Research on Autobody Panels Developmental Technology Based on Reverse Engineering
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)
Dynamic Behavior in a Singular Delayed Bioeconomic Model
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Effects of Network Structure on Public Opinion Development (PSAM-0116)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)