Abstract
In this technical brief, the resonance problem of a robot joint is analyzed. By establishing the electromechanical coupling dynamic equation of the robot joint, the natural vibration characteristics of the electromechanical coupling system are calculated, and the resonance is analyzed by combining the modal energy and Campbell diagram. It is found that when the meshing frequency coincides with the seventh- and eighth-order natural frequencies, resonance is easy to occur. The influence of different parameters on natural characteristics is analyzed. The increase of torsional stiffness and meshing stiffness will increase the natural frequency. Different control algorithms will have different impacts on the transmission system, and fuzzy control is better than double closed-loop control.
Issue Section:
Technical Brief
References
1.
Pupa
, A.
, Arrfou
, M.
, Andreoni
, G.
, and Secchi
, C.
, 2021
, “A Safety-Aware Kinodynamic Architecture for Human–Robot Collaboration
,” IEEE Robot. Autom. Lett.
, 6
(3
), pp. 4465
–4471
. 2.
Grushko
, S.
, Vysocký
, A.
, Oščádal
, P.
, Vocetka
, M.
, Novák
, P.
, and Bobovský
, Z.
, 2021
, “Improved Mutual Understanding for Human–Robot Collaboration: Combining Human-Aware Motion Planning With Haptic Feedback Devices for Communicating Planned Trajectory
,” Sensors
, 21
(11
), pp. 1
–23
. 3.
Day
, C. P.
, 2018
, “Robotics in Industry—Their Role in Intelligent Manufacturing
,” Engineering
, 4
(4
), pp. 440
–445
. 4.
Yin
, H. Q.
, Yi
, W. J.
, Wang
, K. J.
, Guan
, J.
, and Wu
, J. T.
, 2020
, “Research on Brushless DC Motor Control System Based on Fuzzy Parameter Adaptive PI Algorithm
,” AIP Adv.
, 10
(10
), pp. 1
–13
.5.
Wang
, T. T.
, Wang
, H. Z.
, Hu
, H. S.
, and Wang
, C. H.
, 2020
, “LQR Optimized BP Neural Network PI Controller for Speed Control of Brushless DC Motor
,” Adv. Mech. Eng.
, 12
(10
), pp. 1
–13
. 6.
Gobinath
, S.
, and Madheswaran
, M.
, 2020
, “Deep Perceptron Neural Network With Fuzzy PID Controller for Speed Control and Stability Analysis of BLDC Motor
,” Soft Comput.
, 24
(13
), pp. 10161
–10180
. 7.
Wang
, J. L.
, Ding
, J. L.
, Cao
, W. D.
, Li
, Q. F.
, and Zhao
, H.
, 2018
, “Neural Network Fuzzy Control for Enhancing the Stability Performance of Quad-Rotor Helicopter
,” Trans. Inst. Meas. Control
, 40
(11
), pp. 3333
–3344
. 8.
Dong
, B.
, An
, T. J.
, Zhu
, X. Y.
, Li
, Y. C.
, and Liu
, K. P.
, 2021
, “Zero-Sum Game-Based Neuro-Optimal Control of Modular Robot Manipulators With Uncertain Disturbance Using Critic Only Policy Iteration
,” Neurocomputing
, 450
(1
), pp. 183
–196
. 9.
Sun
, T.
, Liu
, C. Y.
, Lian
, B. B.
, Wang
, P. F.
, and Song
, Y. M.
, 2021
, “Calibration for Precision Kinematic Control of an Articulated Serial Robot
,” IEEE Trans. Ind. Electron.
, 68
(7
), pp. 6000
–6009
. 10.
Wang
, J. G.
, Lv
, B.
, Sun
, R.
, and Zhao
, Y. X.
, 2020
, “Resonance and Stability Analysis of a Cracked Gear System for Railway Locomotive
,” Appl. Math. Model.
, 77
(1
), pp. 253
–266
. 11.
Liu
, X. C.
, Sun
, Q.
, and Chen
, C. J.
, 2018
, “Damage Degree Detection of Cracks in a Locomotive Gear Transmission System
,” Shock Vib.
, 2018
(1
), pp. 1
–15
.12.
Yao
, Y.
, Xie
, B.
, Lei
, L.
, Li
, Y. S.
, and Yin
, Q.
, 2021
, “Signal Enhancement Method for Mechanical Fault Diagnosis in Flexible Drive-Train
,” IEEE Trans. Ind. Electron.
, 68
(3
), pp. 2554
–2563
. 13.
Brethee
, K. F.
, Zhen
, D.
, Gu
, F. S.
, and Ball
, A. D.
, 2017
, “Helical Gear Wear Monitoring: Modelling and Experimental Validation
,” Mech. Mach. Theory
, 117
(1
), pp. 210
–229
. 14.
Liu
, C. Z.
, Qin
, D. T.
, and Liao
, Y. H.
, 2015
, “Electromechanical Dynamic Analysis for the Drum Driving System of the Long-Wall Shearer
,” Adv. Mech. Eng.
, 7
(10
), pp. 1
–14
.15.
Liu
, C. Z.
, Qin
, D. T.
, and Liao
, Y. H.
, 2017
, “Electromechanical Dynamic Analysis for the Cutting Transmission System of the Unmanned Long-Wall Shearer Under Variable Speed Process
,” J. VibroEng.
, 19
(5
), pp. 3191
–3206
. 16.
Wang
, Y.
, Liu
, C. Z.
, and Liao
, Y. H.
, 2019
, “Electromechanical Dynamic Analysis for the DTC Induction Motor Driving System of the Unmanned Long-Wall Shearer Drum
,” Clust. Comput.
, 22
(6
), pp. 13325
–13336
. 17.
Kurrek
, P.
, Zoghlami
, F.
, Jocas
, M.
, Stoelen
, M.
, and Salehi
, V.
, 2020
, “Q-Model: An Artificial Intelligence Based Methodology for the Development of Autonomous Robots
,” ASME J. Comput. Inf. Sci. Eng.
, 20
(6
), p. 061006
. 18.
Yi
, Y. Y.
, Qin
, D. T.
, and Liu
, C. Z.
, 2018
, “Investigation of Electromechanical Coupling Vibration Characteristics of an Electric Drive Multistage Gear System
,” Mech. Mach. Theory
, 121
(1
), pp. 446
–459
. 19.
Hu
, Z. H.
, Tang
, J. Y.
, and Chen
, S. Y.
, 2018
, “Analysis of Coupled Lateral-Torsional Vibration Response of a Geared Shaft Rotor System With and Without Gyroscopic Effect
,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.
, 232
(24
), pp. 4550
–4563
. 20.
Wang
, D. Y.
, Hu
, M. H.
, Li
, B. G.
, Qin
, D. T.
, and Sun
, D. Y.
, 2021
, “Modular Modeling and Dynamic Response Analysis of a Driveline System During Start-Up Process
,” Mech. Mach. Theory
, 156
(1
), pp. 1
–17
. 21.
Chen
, S. Y.
, Chiang
, H. H.
, Liu
, T. S.
, and Chang
, C. H.
, 2019
, “Precision Motion Control of Permanent Magnet Linear Synchronous Motors Using Adaptive Fuzzy Fractional-Order Sliding-Mode Control
,” IEEE-ASME Trans. Mechatron.
, 24
(2
), pp. 741
–752
. 22.
Yan
, H.
, Xu
, Y. X.
, Cai
, F. Y.
, Zhang
, H.
, Zhao
, W. D.
, and Gerada
, C.
, 2019
, “PWM-VSI Fault Diagnosis for a PMSM Drive Based on the Fuzzy Logic Approach
,” IEEE Trans. Power Electron.
, 34
(1
), pp. 759
–768
. 23.
Shen
, F.
, Langari
, R.
, and Yan
, R. Q.
, 2020
, “Exploring Sample/Feature Hybrid Transfer for Gear Fault Diagnosis Under Varying Working Conditions
,” ASME J. Comput. Inf. Sci. Eng.
, 20
(4
), p. 041009
. 24.
He
, B.
, Liu
, L.
, and Zhang
, D.
, 2021
, “Digital Twin-Driven Controller Tuning Method for Dynamics
,” ASME J. Comput. Inf. Sci. Eng.
, 21
(3
), p. 031010
. Copyright © 2023 by ASME
You do not currently have access to this content.
