Operating unmanned aerial vehicles (UAVs) over inhabited areas requires mitigating the risk to persons on the ground. Because the risk depends upon the flight path, UAV operators need approaches that can find low-risk flight paths between the mission's start and finish points. Because the flight paths with the lowest risk could be excessively long and indirect, UAV operators are concerned about the tradeoff between risk and flight time. This paper presents a risk assessment technique and bi-objective optimization methods to find low-risk and time (flight path) solutions and computational experiments to evaluate the relative performance of the methods (their computation time and solution quality). The methods were a network optimization approach that constructed a graph for the problem and used that to generate initial solutions that were then improved by a local approach and a greedy approach and a fourth method that did not use the network solutions. The approaches that improved the solutions generated by the network optimization step performed better than the optimization approach that did not use the network solutions.
Skip Nav Destination
Article navigation
June 2016
Research-Article
Risk-Based Path Planning Optimization Methods for Unmanned Aerial Vehicles Over Inhabited Areas1
Eliot Rudnick-Cohen,
Eliot Rudnick-Cohen
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Search for other works by this author on:
Jeffrey W. Herrmann,
Jeffrey W. Herrmann
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Search for other works by this author on:
Shapour Azarm
Shapour Azarm
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Search for other works by this author on:
Eliot Rudnick-Cohen
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Jeffrey W. Herrmann
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Shapour Azarm
Department of Mechanical Engineering,
University of Maryland,
College Park, MD 20742
University of Maryland,
College Park, MD 20742
Contributed by the Design Engineering Division of ASME for publication in the JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING. Manuscript received June 3, 2015; final manuscript received March 22, 2016; published online April 27, 2016. Editor: Bahram Ravani.
J. Comput. Inf. Sci. Eng. Jun 2016, 16(2): 021004 (7 pages)
Published Online: April 27, 2016
Article history
Received:
June 3, 2015
Revised:
March 22, 2016
Citation
Rudnick-Cohen, E., Herrmann, J. W., and Azarm, S. (April 27, 2016). "Risk-Based Path Planning Optimization Methods for Unmanned Aerial Vehicles Over Inhabited Areas." ASME. J. Comput. Inf. Sci. Eng. June 2016; 16(2): 021004. https://doi.org/10.1115/1.4033235
Download citation file:
Get Email Alerts
Cited By
Special Issue: Symbiotic Human–Artificial Intelligence Partnership for Next-Generation Factories
J. Comput. Inf. Sci. Eng (October 2022)
Data-Driven Approaches for Characterization of Aerodynamics on Super High-Speed Elevators
J. Comput. Inf. Sci. Eng
A hybrid algorithm based on GRNN and GOA for welding nugget diameter prediction
J. Comput. Inf. Sci. Eng
Related Articles
Distributed Detect-and-Avoid for Multiple Unmanned Aerial Vehicles in National Air Space
J. Dyn. Sys., Meas., Control (July,2019)
Multi-UAV Cooperative Search Using an Opportunistic Learning Method
J. Dyn. Sys., Meas., Control (September,2007)
Narrower System Reliability Bounds With Incomplete Component Information and Stochastic Process Loading
J. Comput. Inf. Sci. Eng (December,2017)
Robust Attitude Control for Quadrotors Based on Parameter Optimization of a Nonlinear Disturbance Observer
J. Dyn. Sys., Meas., Control (August,2019)
Related Proceedings Papers
Related Chapters
A PIC32 Based Flight Control System Design for an UAV
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Active Disturbance Rejection Controll of Attitude Stability for UAV Flight Control System
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution