To understand the wear mechanism of the ultrahigh molecular weight polyethylene (UHMWPE) articular plate used in artificial knee joints, the cyclic contact behavior of the plate during gait movement was analyzed using the constitutive equation for cyclic plasticity. In this study, two-dimensional plane strain model was employed and the contact behavior of femoral and tibial components was simulated by translating the contact stress distribution which was calculated from elasto-plastic indentation analysis of two components. For analytical model, the anatomical type artificial knee joint was employed and the effect of the shape of contact surface on the wear behavior of the plate was investigated. As a result, it was clarified that the wear of the plate should occur both from the surface and the subsurface of the plate and the wear behavior of the plate should be closely related with the shape of contact surface. Then the optimum shape of contact surface could be designed using this method.

Issue Section:
Technical Papers
Topics:
Knee joint prostheses, Molecular weight, Wear, Shapes, Plane strain, Plasticity, Stress concentration
1.
Atkinson
J. R.
,
Brown
K. J.
, and
Dowson
D.
,
1978
, “
The Wear of High Molecular Weight Polyethylene-PART I: The Wear of Isotropic Polyethylene Against Dry Stainless Steel in Unidirectional Motion
,”
ASME Journal of Lubrication Technology
, Vol.
100
, pp.
208
–
218
.
2.
Bartel
D. L.
,
Burstein
A. M.
,
Toda
M. D.
, and
Edwards
D. L.
,
1985
, “
The Effect of Conformity and Plastic Thickness on Contact Stresses in Metal-Backed Plastic Implants
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
107
, pp.
193
–
199
.
3.
Bartel
D. L.
,
Bicknell
V. L.
, and
Wright
T. M.
,
1986
, “
The Effect of Conformity, Thickness, and Material on Stresses in Ultra-High Molecular Weight Components for Total Joint Replacement
,”
The Journal of Bone and Joint Surgery
, Vol.
68-A
, pp.
1041
–
1051
.
4.
Blunn, G. W., Walker, P. S., Joshi, A., Hardinge, K., 1991, “The Dominance of Cyclic Sliding in Producing Wear in Total Knee Replacements,” Clinical Orthopaedics and Related Research, No. 273, pp. 253–260.
5.
Blunn
G. W.
,
Joshi
A. B.
,
Liley
P. A.
,
Engelbrecht
E.
,
Ryd
L.
,
Lidgren
L.
,
Hardinge
K.
,
Nieder
E.
, and
Walker
P. S.
,
1992
, “
Polyethylene Wear in Unicondylar Knee Prostheses: 106 Retrieved Marmor, PCA, and St Georg Tibial Components Compared
,”
Acta Orthop Scand
, Vol.
63
, pp.
247
–
255
.
6.
Cheng
W.
,
Cheng
H. S.
,
Mura
T.
, and
Keer
L. M.
,
1994
, “
Micromechanics Modeling of Crack Initiation Under Contact Fatigue
,”
ASME Journal of Tribology
, Vol.
116
, pp.
2
–
8
.
7.
Drucker
D. C.
, and
Palgen
L.
,
1981
, “
On Stress-Strain Relation Suitable for Cyclic and Other Loading
,”
ASME Journal of Applied Mechanics
, Vol.
48
, pp.
479
–
485
.
8.
Engh
G. A.
,
Dwyer
K. A.
, and
Hanes
C. K.
,
1992
, “
Polyethylene Wear of Metal-Backed Tibial Components in Total and Unicompartmental Knee Prostheses
,”
The Journal of Bone and Joint Surgery
, Vol.
74-B
, pp.
9
–
17
.
9.
Fisher
J.
,
Dowson
D.
,
Hamdzah
H.
, and
Lee
H. L.
,
1994
, “
The Effect of Sliding Velocity on the Friction and Wear of UHMWPE for Use in Total Artificial Joints
,”
Wear
, Vol.
175
, pp.
219
–
225
.
10.
Ishikawa, H., and Sasaki, K., 1987, “Constitutive Model of Cyclic Plasticity Considering Induced Anisotropy,” Constitutive Laws for Engineering Materials, ed. by Desai, C. S., et al., Elsevier, pp. 581–587.
11.
McKellop
H.
,
Clarke
I.
,
Markolf
K.
, and
Amstutz
H.
,
1981
, “
Friction and Wear Properties of Polymer, Metal, and Ceramic Prosthetic Joint Materials Evaluated on a Multichannel Screening Device
,”
Journal of Biomedical Materials Research
, Vol.
15
, pp.
619
–
653
.
12.
Morrison
J. B.
,
1968
, “
Bioengineering Analysis of Force Actions Transmitted by the Knee Joint
,”
Bio-Medical Engineering
, Vol.
3
, pp.
164
–
170
.
13.
Murakami, T., Ohtsuki, N., and Higaki, H., 1993, “The Adaptive Multimode Lubrication in Knee Prostheses with Compliant Layer During Walking Motion,” Thin Films in Tribology, ed. by Dowson, D. et al., Elsevier, pp. 673–682.
14.
Lafortune
M. A.
,
Cavanagh
P. R.
,
Sommer
H. J.
, and
Kalenak
A.
,
1992
, “
Three-Dimensional Kinematics of the Human Knee During Walking
,”
Journal of Biomechanics
, Vol.
25
, pp.
347
–
357
.
15.
Landy
M. M.
, and
Walker
P. S.
,
1988
, “
Wear of Ultra-High-Molecular-Weight Polyethylene Components of 90 Retrieved Knee Prostheses
,”
The Journal of Arthroplasty
, Vol.
3
, pp.
S73–S85
S73–S85
.
16.
Lausmaa
J.
,
Rostlund
T.
, and
McKellop
H.
,
1991
, “
Wear of Ion Implanted Pure Titanium and Ti6A14V Alloy Against Ultrahigh Molecular Weight Polyethylene
,”
Surface Engineering
, Vol.
7
, pp.
311
–
317
.
17.
Ohkoshi
Y.
,
Yasuda
K.
,
Kaneda
K.
,
Wada
T.
, and
Yamanaka
M.
,
1991
, “
Biomechanical Analysis of Rehabilitation in the Standing Position
,”
The American Journal of Sports Medicine
, Vol.
19
, pp.
605
–
611
.
18.
Oka
M.
,
Noguchi
T.
,
Kumar
P.
,
Ikeuchi
K.
,
Yamamuro
T.
,
Hyon
S. H.
, and
Ikada
Y.
,
1990
, “
Development of an Artificial Articular Cartilage
,”
Clinical Materials
, Vol.
6
, pp.
361
–
381
.
19.
Rose
R. M.
,
Ries
M. D.
,
Paul
I. L.
,
Crugnola
A. M.
, and
Ellis
E.
,
1984
, “
On the True Wear Rate of Ultrahigh Molecular Weight Polyethylene in the Total Knee Prosthesis
,”
Journal of Biomedical Materials Research
, Vol.
18
, pp.
207
–
224
.
20.
Tateishi
T.
, and
Fukubayashi
T.
,
1988
, “
Advanced Biocomposite Material and Application to the Artificial Joint
,”
Bioceramics
, Vol.
1
, pp.
48
–
53
.
21.
Wright
T. M.
,
Rimnac
C. M.
,
Faris
P. M.
, and
Bansal
M.
,
1988
, “
Analysis of Surface Damage in Retrieved Carbon Fiber-Reinforced and Plain Polyethylene Tibial Components from Posterior Stabilized Total Knee Replacements
,”
The Journal of Bone and Joint Surgery
, Vol.
70-A
, pp.
1312
–
1319
.
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.