A metallic cellular materials containing polymer was fabricated by the penetrating polymer into metal foam. The aluminum and stainless steel foams were selected for the metal foam and epoxy resin and polyurethane resin were selected for the penetrated polymer. The mechanical, damping shock absorbing properties of this material were measured. The results of the compressive tests show that this material has different stress-strain curves among the specimens that include different materials in the cells. Also, these results show that this material has high-energy absorption. The internal friction of this material was measured and the result shows that the internal friction of this material is larger than that of pure aluminum closed cellular material without any polymer and change with increasing of temperature. The shock absorbability of this material is larger than that of polymer and smaller than that of metallic cellular material.
- Aerospace Division
Mechanical Properties of Metallic Cellular Materials With Polymer
- Views Icon Views
- Share Icon Share
- Search Site
Kishimoto, S, Naito, K, Shimizu, T, & Yin, F. "Mechanical Properties of Metallic Cellular Materials With Polymer." Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1. Philadelphia, Pennsylvania, USA. September 28–October 1, 2010. pp. 171-177. ASME. https://doi.org/10.1115/SMASIS2010-3725
Download citation file: