A relatively recent and non invasive method for characterizing thermal fields generated by high intensity focused ultrasound (HIFU) transducers is Magnetic Resonance (MR) Thermometry method. However, noise signals generated by external RF sources infiltrate the scanner orifice and limit its ability to measure temperature rise during the heating or ablation phase. In this study, MRI monitored HIFU ablations are performed on freshly excised porcine liver samples, at varying sonication times, 20, 30 and 40 s at a constant acoustic intensity level of 1244 W/cm2. Temperature rise during the procedure is measured using Proton Resonant Frequency MR thermometry. Preliminary experiments without an adequate noise filter, failed to record temperature rise during the heating phase. A low pass R-C filter circuit is subsequently incorporated into the experimental set up to prevent infiltration of noise signals in the MRI orifice. This modified RC filter enables measurement of temperature rise during the heating phase followed by temperature decay during cooling. The measured data is within 12% agreement with the temperature rise computed by solving the acoustic and heat equations.
- Bioengineering Division
Delineation of Noise Signals From MRI Measured Temperature Rise During HIFU Ablation Procedure
- Views Icon Views
- Share Icon Share
- Search Site
Dasgupta, S, Dibaji, SA, Wansapura, J, Myers, MR, & Banerjee, RK. "Delineation of Noise Signals From MRI Measured Temperature Rise During HIFU Ablation Procedure." Proceedings of the ASME 2011 Summer Bioengineering Conference. ASME 2011 Summer Bioengineering Conference, Parts A and B. Farmington, Pennsylvania, USA. June 22–25, 2011. pp. 113-114. ASME. https://doi.org/10.1115/SBC2011-53814
Download citation file: