... cooling channels provide an effective cooling solution that can be optimized and incorporated within standard industry cooling solutions. This paper compares cooling channel performance in several different configurations using design of experiments (DoE) and computational fluid dynamic (CFD) software...

... Abstract In this study, a computational fluid dynamics (CFD) model was developed to model the motion of a solid cold cap in a waste glass melter. Forced convection bubblers at the base of the melter release air into the molten glass, which forms large bubbles that travel upwards to the cold cap...

... reflector.. In this work, a comparison between four different geometries of the secondary reflector of an LFR by means of Computational Fluid Dynamics (Ansys Fluent®) is carried out. It is taking into account the variation of the tilt angle of 45°, 50°. 60° and 70° in the trapezoidal geometry...

...) in the wake modeling domain; second, reducing the computational cost by demanding either smaller or no simulation dataset. Keywords: offshore renewable energy systems, turbulent flow field, GAN, CNN, computational fluid dynamics, reduced-order modeling, unsupervised learning 1. INTRODUCTION Quantifying...

... melters. A high-fidelity, computational fluid dynamics (CFD) model of the pilot-scale DM1200 melter has been developed to provide an understanding of the heat transfer and fluid dynamics within the WTP melters. Monitoring of the non-radioactive pilot-scale system has been primarily done through visual...

... (ORNL), in collaboration with Eaton Corporation, has performed computational research and development to design an innovative, direct-contact heat exchanger (DCHE) that is optimized for a low-temperature organic Rankine cycle. A computational fluid dynamics (CFD) model of DCHE was developed in STAR-CCM...

... 22 09 2010 Application of two mayor design tools, Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD), for the performance improvement of a 76 MW Francis turbine runner is presented. In order to improve the performance of the runner, not only a CFD based optimization...

... operating conditions was evaluated. Results have shown that application of CFD based optimization can modify and improve runners design so as to increase the efficiency and power of installed hydraulic power stations. KEYWORDS Hydraulic Turbine, Francis Runner, Computational Fluid Dynamics, Optimization...

... 04 05 2009 Computational Fluid Dynamic (CFD) models give good predictions of coal combustion in utility boilers if the coal combustion kinetic parameters are known. We developed a three-step methodology to provide reliable prediction of the behavior of a coal in a utility boiler: (1...

... fan centrifugal fan computational fluid dynamics fan curve PWR2005-50132 Proceedings of PWR2005 ASME Power April 5-7, 2005, Chicago, Illinois PWR2005-50132 NUMERICAL SIMULATION PRESSURE DROP THROUGH A ROTATING PLENUM FAN John P. Borg, P.E. Marquette University Dept. of Mechanical Engineering...