Boiling heat transfer is widely used in industry and aerospace, and it can be enhanced by surface structure treatment. Here, two types of Micro-Nano bi-porous copper surfaces (MNBPCS) were prepared by hydrogen bubble template method and then sintered in reducing atmosphere. The effect of surface morphology on the saturated pool boiling of ultrapure water was investigated. Results show that, both NMBPCS have superior heat transfer performance to the plain copper surface. When the heat flux is 100W/cm2, the wall superheat of the two MNBPCS are about 7 and 9 °C lower than the plain copper surface respective. When the heat flux is lower than 130W/cm2, the wall superheat of the mono-layer MNBPCS is lower than that of the multi-layer one, because the bubbles formed on the mono-layer MNBPCS can departure more easily than those on the multi-layer one. When the heat flux is higher than 130W/cm2, the multi-layer MNBPCS has lower wall superheat than that of the mono-layer one, own to its better liquid accommodation from the morphology structure. Significant hysteresis phenomenon was only found on the Multi-layer MNBPCS. Its wall superheat keeps almost the same at about 13°C for its bottom layer structure with smaller cave diameter, when the heat flux is higher than 75W/cm2. The CHF of each MNBPCS is higher than 200W/cm2, and the multi-layer one is higher than the mono-layer one own to its better liquid accommodation from the morphology structure.
Skip Nav Destination
ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer
January 4–6, 2016
Biopolis, Singapore
Conference Sponsors:
- Heat Transfer Division
ISBN:
978-0-7918-4965-1
PROCEEDINGS PAPER
Enhanced Pool Boiling Heat Transfer on Mono and Multi-Layer Micro-Nano Bi-Porous Copper Surfaces
Ya-Qiao Wang,
Ya-Qiao Wang
Sun Yat-sen University, Guangzhou, China
Search for other works by this author on:
Dong-Chuan Mo,
Dong-Chuan Mo
Sun Yat-sen University, Guangzhou, China
Search for other works by this author on:
Shu-shen Lyu
Shu-shen Lyu
Sun Yat-sen University, Guangzhou, China
Search for other works by this author on:
Ya-Qiao Wang
Sun Yat-sen University, Guangzhou, China
Dong-Chuan Mo
Sun Yat-sen University, Guangzhou, China
Shu-shen Lyu
Sun Yat-sen University, Guangzhou, China
Paper No:
MNHMT2016-6544, V001T04A005; 4 pages
Published Online:
March 15, 2016
Citation
Wang, Y, Mo, D, & Lyu, S. "Enhanced Pool Boiling Heat Transfer on Mono and Multi-Layer Micro-Nano Bi-Porous Copper Surfaces." Proceedings of the ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer. Volume 1: Micro/Nanofluidics and Lab-on-a-Chip; Nanofluids; Micro/Nanoscale Interfacial Transport Phenomena; Micro/Nanoscale Boiling and Condensation Heat Transfer; Micro/Nanoscale Thermal Radiation; Micro/Nanoscale Energy Devices and Systems. Biopolis, Singapore. January 4–6, 2016. V001T04A005. ASME. https://doi.org/10.1115/MNHMT2016-6544
Download citation file:
53
Views
Related Proceedings Papers
Related Articles
Nucleate Boiling Comparison between Teflon-Coated Plain Copper and Cu-HTCMC in Water
J. Heat Transfer (August,2018)
Characterization and Pool Boiling Heat Transfer Studies of Nanofluids
J. Heat Transfer (August,2009)
Microporous Coatings to Maximize Pool Boiling Heat Transfer of Saturated R-123 and Water
J. Heat Transfer (August,2015)
Related Chapters
Post-CHF Heat Transfer in Flow Boiling
Two-Phase Heat Transfer
Critical Heat Flux in Flow Boiling
Two-Phase Heat Transfer
Template-Based Evaluation of High Speed Video Recording of Bubble Formation with Pool Boiling of Propane
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)