The CO2 transcritical Rankine power cycle has been widely investigated recently, because of its better temperature glide matching between sensible heat source and working fluid in vapor generator, and its desirable qualities, such as moderate critical point, little environment impact and low cost. A reheat CO2 transcritical power cycle with two stage expansion is presented to improve baseline cycle performance in this paper. Energy and exergy analysis are carried out to investigate parametric effects on cycle performance. The main results show that reheat cycle performance is sensitive to the medium pressures and the optimum pressures exist for maximizing net work output and thermal efficiency, respectively. Reheat cycle is compared to baseline cycle under the same conditions. More significant improvements by reheat are obtained at lower turbine inlet temperatures and/or larger high cycle pressure. Work output improvement is much higher than thermal efficiency improvement, because extra waste heat is required to reheat CO2. Based on second law analysis, exergy efficiency of reheat cycle is also higher than that of baseline cycle, because more useful work is converted from waste heat. Reheat with two stage expansion has great potential to improve thermal efficiency and especially net work output of a CO2 transcritical power cycle using a low-grade heat source.
Skip Nav Destination
ASME 2011 International Mechanical Engineering Congress and Exposition
November 11–17, 2011
Denver, Colorado, USA
Conference Sponsors:
- ASME
ISBN:
978-0-7918-5490-7
PROCEEDINGS PAPER
Analysis of a Reheat Carbon Dioxide Transcritical Power Cycle Using a Low Temperature Heat Source
Hanfei Tuo
Hanfei Tuo
University of Illinois Urbana Champaign, Urbana, IL
Search for other works by this author on:
Hanfei Tuo
University of Illinois Urbana Champaign, Urbana, IL
Paper No:
IMECE2011-65000, pp. 219-225; 7 pages
Published Online:
August 1, 2012
Citation
Tuo, H. "Analysis of a Reheat Carbon Dioxide Transcritical Power Cycle Using a Low Temperature Heat Source." Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition. Volume 4: Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy, Parts A and B. Denver, Colorado, USA. November 11–17, 2011. pp. 219-225. ASME. https://doi.org/10.1115/IMECE2011-65000
Download citation file:
24
Views
Related Proceedings Papers
Related Articles
A New Reactor Concept for Efficient Solar-Thermochemical Fuel Production
J. Sol. Energy Eng (August,2013)
Condensation Heat Transfer of Carbon Dioxide Inside Horizontal Smooth and Microfin Tubes at Low Temperatures
J. Heat Transfer (February,2009)
Renewable Energy Based Dimethyl-Ether Production System Linked With Industrial Waste Heat
J. Energy Resour. Technol (December,2019)
Related Chapters
Studies Performed
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Modeling of Electrode Processes and Surface Chemistry in Carbon Dioxide Containing Solutions
Computer Modeling in Corrosion
Thermodynamic Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential