In military aircraft and helicopter seat design, the seat system must be provided with an energy absorber (EA) to attenuate the acceleration level sustained by the occupants. Because of the limited stroke available for the seat structure, the design of the energy absorber becomes a trade-off problem between the seat stroke and the impact energy absorption. The available stroke must be used to prevent bottoming out of the seat, and also to absorb as much impact energy as possible to protect the occupant. In this study, the energy absorbing systems in civil and military aircraft seat design are evaluated and improved using a mathematical model of the occupant/seat system. Three load-limit design curves, namely, simple EA, two-stage EA, and two-stage EA with initial spike, are modeled, examined, and compared. A model of the load limiter is recommended to minimize the load sustained by the occupant by limiting the relative velocity between the seat pan and the occupant pelvis. Experimental responses of seat system and occupant from literature are utilized to validate the results from this study for civil and military helicopters. A modified energy-absorber/load-limiter is then implemented for the seat structure so that it absorbs the impact energy in an effective manner below the tolerable limit for the occupant and within a minimum stroke. Results from this study indicate that for a designed stroke, the occupant pelvic/lumbar spine injury level is significantly attenuated using the modified energy-absorber system.
Skip Nav Destination
ASME 2012 International Mechanical Engineering Congress and Exposition
November 9–15, 2012
Houston, Texas, USA
Conference Sponsors:
- ASME
ISBN:
978-0-7918-4517-2
PROCEEDINGS PAPER
Crash Energy Management of Rotorcraft Seat Based on Limit Load Curves and Corresponding Occupant Pelvic Load
Rohit Jategaonkar,
Rohit Jategaonkar
TASS Americas, Livonia, MI
Search for other works by this author on:
Hamid M. Lankarani
Hamid M. Lankarani
Wichita State University, Wichita, KS
Search for other works by this author on:
Rasoul Moradi
TASS Americas, Livonia, MI
Tony Bromwell
TASS Americas, Livonia, MI
Rohit Jategaonkar
TASS Americas, Livonia, MI
Hamid M. Lankarani
Wichita State University, Wichita, KS
Paper No:
IMECE2012-88467, pp. 193-202; 10 pages
Published Online:
October 8, 2013
Citation
Moradi, R, Bromwell, T, Jategaonkar, R, & Lankarani, HM. "Crash Energy Management of Rotorcraft Seat Based on Limit Load Curves and Corresponding Occupant Pelvic Load." Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition. Volume 1: Advances in Aerospace Technology. Houston, Texas, USA. November 9–15, 2012. pp. 193-202. ASME. https://doi.org/10.1115/IMECE2012-88467
Download citation file:
13
Views
Related Proceedings Papers
Related Articles
Implications of Turbine Erosion for an Aero-Engine’s
High-Pressure-Turbine Blade’s Low-Cycle-Fatigue Life-Consumption
J. Eng. Gas Turbines Power (September,2009)
A Pseudo-Rigid-Body Model of the Human Spine to Predict Implant-Induced Changes on Motion
J. Mechanisms Robotics (November,2011)
String Instabilities in Formation Flight: Limitations Due to Integral Constraints
J. Dyn. Sys., Meas., Control (December,2004)
Related Chapters
Piston Aeroengines
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Mechanical Construction
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
On the Design of Smart Wireless Power Outlet Towards Intelligent Home Energy Management
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)