Fuel cells represent a promising energy alternative to the traditional combustion of fossil fuels. In particular, solid oxide fuel cells (SOFCs) have been of interest due to their high energy densities and potential for stationary power applications. One of the key obstacles precluding the maturation and commercialization of planar SOFCs has been the lack of a robust sealant. This paper presents a computational model of leakage with the utilization of mica-based compressive seals. A finite element model is developed to ascertain the macroscopic stresses and deformations in the interface. In conjunction with the finite element model is a microscale contact mechanics model that accounts for the role of surface roughness in determining the mean interfacial gap at the interface. An averaged Reynolds equation derived from mixed lubrication theory is applied to model the leakage flow across the rough, annular interface. The composite model is applied as a predictive tool for assessing how certain physical parameters (i.e., seal material composition, compressive applied stress, surface finish, and interfacial conformity) affect seal leakage rates.

Volume Subject Area:
Tribology
Topics:
Leakage, Modeling, Solid oxide fuel cells, Finite element model, Sealants, Stress, Surface roughness, Combustion, Composite materials, Contact mechanics, Deformation, Finishes, Fossil fuels, Fuel cells, Leakage flows, Lubrication theory, Microscale devices
1.
S. C. Singhal, “Progress in tubular solid oxide fuel cell technology,” presented at Proceedings of Solid Oxide Fuel Cells, 17–22, Honolulu, HI, USA, Oct. 1999.
2.
Minh
N. Q.
, “
Ceramic fuel cells
,”
Journal of the American Ceramic Society
, vol.
76
, pp.
563
–
588
,
1993
.
3.
J. Larminie, Fuel Cells Explained. Chichester: Wiley, 2003.
4.
Chou
Y.-S.
,
Stevenson
J. W.
, and
Chick
L. A.
, “
Ultralow leak rate of hybrid compressive mica seals for solid oxide fuel cells
,”
Journal of Power Sources
, vol.
112
, pp.
130
–
6
,
2002
.
5.
Chou
Y.-S.
and
Stevenson
J. W.
, “
Long-term thermal cycling of Phlogopite mica-based compressive seals for solid oxide fuel cells
,”
Journal of Power Sources
, vol.
140
, pp.
340
–
5
,
2005
.
6.
Y.-S. Chou and J. W. Stevenson, “Compressive mica seals for solid oxide fuel cells,” presented at Joining of Advanced and Specialty Materials VII, Oct 18–20 2004, Columbus, OH, United States, 2005.
7.
Greenwood
J. A.
and
Williamson
J. B. P.
, “
Contact of Nominally Flat Rough Surfaces
,”
Proceedings of the Royal Society of London
, vol.
A295
, pp.
300
–
319
,
1966
.
8.
N. Patir and H. S. Cheng, “Average flow model for determining the effect of three-dimensional roughness on partial hydrodynamic lubrication,” vol. 100, pp. 12–17, 1978.
9.
Chou
Y.-S.
and
Stevenson
J. W.
, “
Thermal cycling and degradation mechanisms of compressive mica-based seals for solid oxide fuel cells
,”
Journal of Power Sources
, vol.
112
, pp.
376
–
83
,
2002
.
10.
K. L. Johnson, Contact Mechanics, Ninth printing ed. Cambridge, United Kingdom: Cambridge University Press, 2003.
11.
J.L. Streator, “A model of mixed lubrication with capillary effects,” Proceedings of the 28th Leeds-Lyon Symposium on Tribology-Boundary and Mixed Lubrication: Science and Applications, D. Dowson et al, eds., London, England, p. 121–128, 2002.
This content is only available via PDF.
Copyright © 2006
 by ASME
You do not currently have access to this content.