We present results from a new procedure developed to quantify the pull-off force and strain energy release rates associated with stiction-failure in microdevices. The method is analogous to a standard, macro-scale peel test, but carried out using micro-scale devices. Adhesion is initiated by lowering an array of microcantilevers that protrude from a substrate into contact with a separate substrate. Displacement is controlled by a piezo-actuator with sub-nm resolution while alignment is controlled using linear and tilt stages. An interferometric microscope is used to align the array and the substrate and to record deflection profiles and adhesion lengths during peel-off. This geometry is accurately modeled using linear elastic fracture mechanics, creating a robust, reliable, standard method for measuring adhesion energies in stiction-failed microdevices.

Volume Subject Area:
Microelectromechanical Systems
Topics:
Adhesion, Stiction, Deflection, Displacement, Failure, Fracture mechanics, Geometry, Microcantilevers, Microscale devices, Microscopes, Piezoelectric actuators, Resolution (Optics)
1.
T. Abe, W.C. Messner, and M.L. Reed, “Effective methods to prevent stiction during post-release-etch processing,” Proceedings of IEEE Micro Electro Mechanical Systems Conference, pp. 94–99, 1995.
2.
R. Legtenberg, A.C. Tilmans, J. Elders, and M. Elwenspoek, “Stiction of surface microstructures after rinsing and drying: Model and investigation of adhesion mechanisms,” Proceedings of Transducers 93, the 7th International Conference on Solid-State Sensors and Actuators, pp. 198–201, 1993.
3.
Maboudian
R.
and
Howe
R. T.
, “
Critical Review: Adhesion in surface micromechanical structures
,”
Journal of Vacuum Science Technology B
, vol.
15
, pp.
1
–
20
,
1997
.
4.
C. H. Mastrangelo and C. H. Hsu, “A simple experimental technique for the measurement of the work of adhesion of microstructures,” in Int. Workshop Solid State Sensors and Actuators (Hilton Head ‘92), 1992, pp. 208–212.
5.
Mastrangelo
C. H.
and
Hsu
C. H.
, “
Mechanical stability and adhesion of microstructures under capillary forces-part I: Basic theory
,”
Journal of Microelectromechanical Systems
, vol.
2
, pp.
33
–
43
,
1993
.
6.
Mastrangelo
C. H.
and
Hsu
C. H.
, “
Mechanical stability and adhesion of microstructures under capillary forces-part II: Experiments
,”
Journal of Microelectromechanical Systems
, vol.
2
, pp.
44
–
55
,
1993
.
7.
de Boer
M.
and
Michalske
T.
, “
Accurate method for determining adhesion of cantilever beams
,”
Journal of Applied Physics
, vol.
86
, pp.
817
–
827
,
1999
.
8.
Jones
E.
,
Begley
M.
, and
Murphy
K.
, “
Adhesion of micro-cantilevers subjected to mechanical point-loading: modeling and experiments
,”
Journal of the Mechanics and Physics of Solids
, vol.
51
(
8)
, pp.
1601
–
1622
,
1993
.
9.
Z. C. Leseman, S. Carlson, and T. J. Mackin, “Experimental Measurements of the Strain Energy Release Rate for Stiction-Failed Microcantilevers Using a Single-Cantilever Beam Peel Test,” Journal of Microelectromechanical Systems, to appear.
10.
Sniegowski
J. J.
and
de Boer
M. P.
, “
IC-compatible polysilicon surface micromachining
,”
Annual Review of Material Science
, vol.
30
, pp.
299
–
333
,
2000
.
11.
C. D. Bain, E. B. Troughton, Y. T. Tao, J. Evall, and G. M. Whitesides, “Formation of monolayer films by the spontaneous assembly of oraganic thiols from solution onto gold,” NTIS Report TR-8, 1988.
12.
Bain
C. D.
,
Troughton
E. B.
,
Tao
Y. T.
,
Evall
J.
, and
Whitesides
G. M.
, and
Nuzzo
G.
, “
Formation of monolayer films by the spontaneous assembly of oraganic thiols from solution onto gold
,”
J. Am. Chem. Soc.
,
111
, pp.
321
–
335
,
1989
.
13.
P. Davies, Protocols for Interlaminar Fracture Testing of Composites. European Structural Integrity Society (ESIS) Polymer and Composites Track Group, Sept. 1993.
14.
H.L. Ewalds and R.J.H. Wanhill, Fracture Mechanics, Edward Arnold Press, New York, 1993.
15.
de Boer
M. P.
,
Clews
P. J.
,
Smith
B. K.
, and
Michalske
T. A.
, “
Adhesion of polysilicon microbeams in controlled humidity ambients
,”
MRS Symposuim Proceedings
, vol.
518
, pp.
131
–
136
,
1998
.
16.
Bhushan
B.
, “
Nanoscale tribophysics and tribomechanics
”,
Wear
, vol.
225–229
, pp.
465
–
492
,
1999
.
17.
G. Horn, T. Mackin, and J. Lesniak, “Trapped Particle Detection in Bonded Semiconductors using Grey-Field Photoelastic Imaging”, Experimental Mechanics, to appear.
18.
Bhushan
B.
, “
Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction
,”
Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures
, vol.
21
, pp.
2262
–
2296
,
2003
.
19.
Srinivasan
U.
,
Houston
M. R.
,
Howe
R. T.
, and
Maboudian
R.
, “
Alkyltrichlorosilane-based self-assembled monolayer films for stiction reduction in silicon micromachines
,”
Journal of Microelectromechanical Systems
, vol.
7
, pp.
252
–
260
,
1998
.
This content is only available via PDF.
Copyright © 2006
 by ASME
You do not currently have access to this content.