Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Helical gears , Vibration , Bearings , Stress , Degrees of freedom , Boundary-value problems , Couplings , Equations of motion , Errors , Excitation

Modified Surface Topology of Involute Helical Gears Developed for Improvement of Bearing Contact and Reduction of Transmission Errors

Ignacio Gonzalez-Perez, Alfonso Fuentes, Faydor L. Litvin, Kenichi Hayasaka, Kenji Yukishima

IDETC-CIE 2005; 571-584doi:https://doi.org/10.1115/DETC2005-84012

Abstract

View Article

PDF

Topics: Bearings , Errors , Helical gears , Topology , Gear teeth , Mechanical drives , Stress , Cutting , Finite element methods , Finite element model

Design, Manufacture, and Evaluation of Prototypes of Low-Noise High-Endurance Spiral Bevel Gear Drives

Alfonso Fuentes, Ignacio Gonzalez-Perez, Faydor L. Litvin, Kenichi Hayasaka, Kenji Yukishima

IDETC-CIE 2005; 585-595doi:https://doi.org/10.1115/DETC2005-84013

Abstract

View Article

PDF

Topics: Design , Engineering prototypes , Noise (Sound) , Spiral bevel gears , Bearings , Errors , Mechanical drives , Stress , Stress analysis (Engineering) , Blades

Modeling and Control for Launch and Shift of Dual-Clutch Transmission Vehicles

Manish Kulkarni, Taehyun Shim, Yi Zhang

IDETC-CIE 2005; 597-604doi:https://doi.org/10.1115/DETC2005-84048

Abstract

View Article

PDF

Topics: Control modeling , Vehicles , Pressure , Traction , Dynamic models , Gears , Matlab , Simulation , Simulation analysis , Simulation models

The Tooth Contact Analysis of Round Pin Jointed Silent Chains

Chintien Huang, Leo Kosasih, Chao-Chuan Huang

IDETC-CIE 2005; 605-613doi:https://doi.org/10.1115/DETC2005-84065

Abstract

View Article

PDF

Topics: Chain , Design , Kinematics

A New Orthogonal Skew-Axis Drive With Face Gear and Cylindrical Worm: Mathematical Model, Geometric Synthesis and Generation Method

Ileana D. Napau, Vistrian Maties, Ioan Napau, Radu C. Napau-Stoica, Mircea Napau

IDETC-CIE 2005; 615-624doi:https://doi.org/10.1115/DETC2005-84084

Abstract

View Article

PDF

Topics: Gears , Mechanical drives , Design , Kinematics , Load bearing capacity , Mass production , Simulation , Three-dimensional computer-aided design , Wheels , Worm gears

Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process

Qi Fan

IDETC-CIE 2005; 625-636doi:https://doi.org/10.1115/DETC2005-84085

Abstract

View Article

PDF

Topics: Modeling , Simulation , Spiral bevel gears

Design and Analysis of Transmission Spline and Key Profiles

Shih-Hsi Tong, Daniel C. H. Yang

IDETC-CIE 2005; 637-640doi:https://doi.org/10.1115/DETC2005-84086

Abstract

View Article

PDF

Topics: Design , Splines

The Mathematical Model and Tooth Surface Deviations of Internal Conical Gears

Chia-Chang Liu

IDETC-CIE 2005; 641-646doi:https://doi.org/10.1115/DETC2005-84097

Abstract

View Article

PDF

Topics: Gears , Bearings , Computers , Geometry , Machinery

A General Method of Kinematic Analysis of Parallel Axes Epicyclic Gear Trains Based on Graph-Cycle Matroid Theory

Ilie Talpasanu, T. C. Yih, P. A. Simionescu

IDETC-CIE 2005; 647-656doi:https://doi.org/10.1115/DETC2005-84119

Abstract

View Article

PDF

Topics: Cycles , Kinematic analysis , Planetary gears , Trains , Circuits , Gears , Degrees of freedom , Equations of motion

Friction Loss of Non-Involute Tooth Profile Gears

Kiyotaka Ikejo, Kazutero Nagamura, Florin Gabriel Tutulan

IDETC-CIE 2005; 657-663doi:https://doi.org/10.1115/DETC2005-84148

Abstract

View Article

PDF

Topics: Friction , Gears , Composite materials , Spur gears , Bending strength , Durability , Machinery , Mechanical drives , Temperature , Testing

Characteristic Analysis and Experiment Study of the Closed Planetary Gear Transmission

Hui Wu Wang, Long Quan Xue, Ya Hui Cui, Xiang Ru Xi

IDETC-CIE 2005; 665-670doi:https://doi.org/10.1115/DETC2005-84205

Abstract

View Article

PDF

Topics: Bifurcation , Design , Flow (Dynamics) , Kinematics , Locks (Waterways) , Mechanical drives , Planetary gears

Undercutting and Contact Characteristics of Cylindrical Gears With Curvilinear Shaped Teeth Generated by Hobbing

Jui-Tang Tseng, Chung-Biau Tsay

IDETC-CIE 2005; 671-680doi:https://doi.org/10.1115/DETC2005-84228

Abstract

View Article

PDF

Topics: Gears , Errors , Manufacturing , Design , Kinematics , Topology

Classification and Synthesis of Planetary Gear Trains

Long Quan Xue, You Ming Wang, Hui Wu Wang, Rong Chang Liu

IDETC-CIE 2005; 681-688doi:https://doi.org/10.1115/DETC2005-84231

Abstract

View Article

PDF

Topics: Planetary gears , Trains

Bidirectional Mesh Model for Spur Gear Systems

Yu-Xin Wang

IDETC-CIE 2005; 689-697doi:https://doi.org/10.1115/DETC2005-84244

Abstract

View Article

PDF

Topics: Spur gears , Gears , Dynamic response , Deflection , Nonlinear vibration , Stiffness , Vibration

Power Loss Predictions in a 6-Speed Manual Gearbox Using Thermal Networks

C. Changenet, X. Oviedo-Marlot, P. Velex

IDETC-CIE 2005; 699-709doi:https://doi.org/10.1115/DETC2005-84290

Abstract

View Article

PDF

Topics: Manual transmissions , Mechanical drives , Temperature , Convection , Die cutting , Energy dissipation , Friction , Heat conduction , Radiation (Physics) , Rolling bearings

Modeling of Spur and Helical Gear Planetary Drives With Flexible Ring-Gears and Planet Carriers

V. Abousleiman, P. Velex, S. Becquerelle

IDETC-CIE 2005; 711-722doi:https://doi.org/10.1115/DETC2005-84292

Abstract

View Article

PDF

Topics: Gears , Helical gears , Modeling , Deflection , Algorithms , Condensation , Equations of motion , Finite element model , Lumped parameter models , Planetary gears

Modeling of a New Hydraulic Control System for a Belt-Type Continuously Variable Transmission

Norman K. Bucknor

IDETC-CIE 2005; 723-733doi:https://doi.org/10.1115/DETC2005-84342

Abstract

View Article

PDF

Topics: Belts , Hydraulic control , Modeling , Pumps , Flow (Dynamics) , Pulleys , Corporate average fuel economy , Fuel efficiency , Pressure , Design

Influence of the Nonlinear Dynamic Behavior of Journal Bearings on Gear-Bearing Assemblies

Se´bastien Baguet, Philippe Velex

IDETC-CIE 2005; 735-745doi:https://doi.org/10.1115/DETC2005-84383

Abstract

View Article

PDF

Topics: Bearings , Gears , Journal bearings , Algorithms , Stiffness , Contact mechanics , Damping , Excitation , Finite element model , Lubricants

Results From a New Separation Algorithm for Planetary Gear System Vibration Measurements

Marianne Mosher

IDETC-CIE 2005; 747-754doi:https://doi.org/10.1115/DETC2005-84404

Abstract

View Article

PDF

Topics: Algorithms , Planetary gears , Separation (Technology) , Signals , Vibration , Vibration measurement

Measurement and Validation of Dynamic Bending Stresses in Spur Gear Teeth

Suren B. Rao, Vernon Schwanger, Douglas R. McPherson, Clay Rudd

IDETC-CIE 2005; 755-764doi:https://doi.org/10.1115/DETC2005-84419

Abstract

View Article

PDF

Topics: Bending (Stress) , Spur gears , Stress , Gear teeth , Design , Gears , Bending strength , Calibration , Data acquisition , Instrumentation

Balancing Dynamic Strength of Gears Operated at Reduced Center Distance

Hsiang Hsi Lin, Gous Mohammed

IDETC-CIE 2005; 765-780doi:https://doi.org/10.1115/DETC2005-84429

Abstract

View Article

PDF

Topics: Gears , Stress , Design , Dynamics (Mechanics) , Gear teeth , NASA , Spur gears

Kinematic Synthesis and Design of Non-Circular Gears Through a Symbolic-Numeric Modeling Approach

Pietro Fanghella

IDETC-CIE 2005; 781-789doi:https://doi.org/10.1115/DETC2005-84458

Abstract

View Article

PDF

Topics: Design , Gears , Kinematics , Modeling

Gear Coordinate Measurement Onboard CNC Machine With Touch-Trigger Probe

Jie Tan

IDETC-CIE 2005; 791-799doi:https://doi.org/10.1115/DETC2005-84606

Abstract

View Article

PDF

Topics: Computer numerical control machine tools , Gears , Machinery , Probes

Effects of Assembly Errors on Hypoid Gear Mesh and Dynamic Response

Teik C. Lim, Jun Wang

IDETC-CIE 2005; 801-806doi:https://doi.org/10.1115/DETC2005-84638

Abstract

View Article

PDF

Topics: Dynamic analysis , Dynamic response , Errors , Manufacturing , Spiral bevel gears

Active Shaft Transverse Vibration Control of a Spur Gear Pair System

Teik C. Lim, Mingfeng Li

IDETC-CIE 2005; 807-813doi:https://doi.org/10.1115/DETC2005-84640

Abstract

View Article

PDF

Topics: Actuators , Gears , Spur gears , Vibration control , Vibration , Algorithms , Bearings , Computer software , Control equipment , Damping

Fillet Shape Optimization for Gear Teeth

Hansong Xiao, Jean W. Zu, Wieslaw Zaton

IDETC-CIE 2005; 815-820doi:https://doi.org/10.1115/DETC2005-84657

Abstract

View Article

PDF

Topics: Bending (Stress) , Boundary element methods , B-splines , Gear teeth , Shape optimization

Load Sharing of a Worm Gear With a Plastic Wheel

Yann Hiltcher, Miche`le Guingand, Jean-Pierre de Vaujany

IDETC-CIE 2005; 821-827doi:https://doi.org/10.1115/DETC2005-84670

Abstract

View Article

PDF

Topics: Stress , Wheels , Worm gears , Computation , Damping , Deformation , Displacement , Errors , Gears , Hooke's law

Effect of Tooth Load Distribution on Bull Gear Vibration

Paul B. Talbert, Edward M. Jankowich

IDETC-CIE 2005; 829-841doi:https://doi.org/10.1115/DETC2005-84686

Abstract

View Article

PDF

Topics: Gears , Stress , Vibration , Helical gears , Spur gears , Traveling waves , Wear , Cycles , Finite element model , Gear teeth

Efficiency in Spatial Gearing

David B. Dooner

IDETC-CIE 2005; 843-851doi:https://doi.org/10.1115/DETC2005-84696

Abstract

View Article

PDF

Topics: Friction , Gears , Lubricants , Pressure , Spiral bevel gears , Traction , Worm gears

Influence of Planetary Needle Bearings on the Performance of Single and Double Pinion Planetary Systems

Avinash Singh

IDETC-CIE 2005; 853-862doi:https://doi.org/10.1115/DETC2005-84728

Abstract

View Article

PDF

Topics: Bearings , Needles , Gears , Stress , Deflection , Planetary gears , Aerospace industry , Bending (Stress) , Computer simulation , Design

Improvement of Efficiency of Shaft Drive CVT by Backup Roller

Masashi Yamanaka, Yukihito Narita, Katsumi Inoue

IDETC-CIE 2005; 863-868doi:https://doi.org/10.1115/DETC2005-84797

Abstract

View Article

PDF

Topics: Rollers , Disks , Torque , Bearings

Three Dimensional Calculation of Meshing Stiffness for Spur Gears

Mohammad Durali, Mariam Gh. Saryazdi

IDETC-CIE 2005; 869-873doi:https://doi.org/10.1115/DETC2005-84821

Abstract

View Article

PDF

Topics: Spur gears , Stiffness , Deflection , Dimensional analysis , Gear teeth , Gears , Springs , Stress

Design of Shaft Drive CVT: Calculation of Transmitted Torque and Efficiency

Yukihito Narita, Masashi Yamanaka, Katsumi Inoue

IDETC-CIE 2005; 875-881doi:https://doi.org/10.1115/DETC2005-84841

Abstract

View Article

PDF

Topics: Design , Torque , Disks , Rollers , Bearings , Shear (Mechanics) , Traction

Dynamic Behavior Simulation of a Worm Gear

Ce´line Bordegaray, Guy Ferraris, Miche`le Guingand, Jean-Pierre de Vaujany

IDETC-CIE 2005; 883-890doi:https://doi.org/10.1115/DETC2005-85198

Abstract

View Article

PDF

Topics: Simulation , Worm gears , Damping , Excitation , Gears , Stiffness , Electricity (Physics) , Errors , Spur gears , Transients (Dynamics)

A New Cycloid Drive With Ceramic Balls as Its Gear Teeth

Jianjun Zhou

IDETC-CIE 2005; 891-895doi:https://doi.org/10.1115/DETC2005-85211

Abstract

View Article

PDF

Topics: Ceramics , Gear teeth

A Frictional Efficiency Loss Model for Helical Gears

Hai Xu, Ahmet Kahraman

IDETC-CIE 2005; 897-908doi:https://doi.org/10.1115/DETC2005-85243

Abstract

View Article

PDF

Topics: Helical gears , Friction , Mechanical efficiency , Stress , Computation , Gears , Design , Disks , Elastohydrodynamic lubrication , Lubricants

Numerical and Experimental Study of the Loaded Transmission Error of a Spiral Bevel Gear

Jean-Pierre de Vaujany, Miche`le Guingand, Didier Remond, Yvan Icard

IDETC-CIE 2005; 909-915doi:https://doi.org/10.1115/DETC2005-85254

Abstract

View Article

PDF

Topics: Errors , Spiral bevel gears , Gears , Computer simulation , Deformation , Computation , Cutting , Design , Finite element model , Torque

A Study of the Relationship Between the Dynamic Factor and the Dynamic Transmission Error of Spur Gear Pairs

V. K. Tamminana, A. Kahraman, S. Vijayakar

IDETC-CIE 2005; 917-927doi:https://doi.org/10.1115/DETC2005-85309

Abstract

View Article

PDF

Topics: Errors , Spur gears , Stress , Bending (Stress) , Dynamic models , Gears

Design System for Composite Transmission Error Prediction for Automatic Transmission

V. Sundararajan, Daniel Antonetti, Paul K. Wright, Sameer Gudal, Shounak Athavale, Yong Pan, Shuh-Yuan Liou

IDETC-CIE 2005; 929-936doi:https://doi.org/10.1115/DETC2005-85497

Abstract

View Article

PDF

Topics: Composite materials , Design , Errors , Noise (Sound) , Gears , Automotive transmissions , Mathematical analysis , Planetary gears , Vehicles

Torsional Vibration Response of Helical Gears Under Non-Linear Time-Varying Parameters Using HBM

Chinmaya Kar, A. R. Mohanty

IDETC-CIE 2005; 937-944doi:https://doi.org/10.1115/DETC2005-85551

Abstract

View Article

PDF

Topics: Helical gears , Vibration , Mechanical drives , Gears , Algorithms , Automotive transmissions , Constitutive equations , Damping , Fourier series , Friction