Skip Nav Destination
Proceedings Papers
In This Volume
Volume 1B: 16th Biennial Conference on Mechanical Vibration and Noise
Symposium on Vibration Analysis of Rotating Systems and Machinery
Torsional Vibration
Analysis of Models for Torsional Vibration of Shaft System With Planetary Gearing
IDETC-CIE 1997; V01BT07A001https://doi.org/10.1115/DETC97/VIB-4036
Topics:
Planetary gears
,
Vibration
A Comprehensive Torsional Vibration Analysis Procedure: Part I
IDETC-CIE 1997; V01BT07A003https://doi.org/10.1115/DETC97/VIB-4048
Topics:
Vibration analysis
,
Design
,
Turbomachinery
,
Vibration
,
Failure
,
Gear teeth
A Comprehensive Torsional Vibration Analysis Procedure: Part II
IDETC-CIE 1997; V01BT07A004https://doi.org/10.1115/DETC97/VIB-4173
Topics:
Design
,
Trains
,
Turbomachinery
,
Vibration
,
Vibration analysis
Unbalance Response
The Estimation of Rotor Unbalance
IDETC-CIE 1997; V01BT07A005https://doi.org/10.1115/DETC97/VIB-4039
Topics:
Rotors
,
Bearings
,
Computer simulation
,
Machinery
,
Mode shapes
PC Based Nonlinear Dynamic Simulation and Animation of the Tilting Pad Guide Bearing in Large Hydro-Unit
IDETC-CIE 1997; V01BT07A006https://doi.org/10.1115/DETC97/VIB-4040
Topics:
Bearings
,
Simulation
,
Computers
,
Displacement
,
Rotation
Active Bearings
Levitation and Torque Control of PM Synchronous and Induction Type Bearingless Motor
IDETC-CIE 1997; V01BT07A009https://doi.org/10.1115/DETC97/VIB-4032
Topics:
Electromagnetic induction
,
Engines
,
Levitation
,
Motors
,
Torque control
,
Stress
,
Magnetic flux
,
Poles (Building)
,
Rotors
,
Stators
Experimental Investigation of a Piezoelectrically Actuated Rotating Parts Feeder
IDETC-CIE 1997; V01BT07A010https://doi.org/10.1115/DETC97/VIB-4034
Topics:
Actuators
,
Antiresonance
,
Displacement
,
Electronic systems
,
Excitation
,
Interferometers
,
Lasers
,
Manufacturing
,
Piezoelectric actuators
,
Resonance
A Study on Electro-Magnetic Auto-Balancing System and its Balancing Method
IDETC-CIE 1997; V01BT07A011https://doi.org/10.1115/DETC97/VIB-4053
Topics:
Electromagnetic force
,
Plates (structures)
,
Rotors
,
Sensors
,
Stators
Evaluation of AMB Turbomachinery Auxiliary Bearings
IDETC-CIE 1997; V01BT07A012https://doi.org/10.1115/DETC97/VIB-4059
Topics:
Bearings
,
Turbomachinery
,
Rotors
,
Design
,
Machinery
,
Transients (Dynamics)
,
Compressors
,
Magnetic bearings
,
Stress
,
Thrust
Bearings and Seals
Vibration Analysis of High Speed Stepped Thrust Gas Film Bearings With Inertia Effects
IDETC-CIE 1997; V01BT07A013https://doi.org/10.1115/DETC97/VIB-4047
Topics:
Bearings
,
Inertia (Mechanics)
,
Thrust
,
Vibration
,
Vibration analysis
Instability — I
Rotor Instability Due to Coupled Effect of Lateral and Torsional Modes and Improper Bearing Design
IDETC-CIE 1997; V01BT07A016https://doi.org/10.1115/DETC97/VIB-4031
Topics:
Bearing design
,
Rotors
,
Vibration
,
Stability
,
Vibration analysis
,
Bearings
,
Dampers
,
Gears
,
Generators
,
Stators
Spontaneous Sidebanding at Subharmonic Peaks of Rotordynamic Nonlinear Response
IDETC-CIE 1997; V01BT07A017https://doi.org/10.1115/DETC97/VIB-4041
Topics:
Clearances (Engineering)
,
Computer simulation
,
Machinery
,
Nonlinear systems
,
Rotordynamics
,
Rotors
,
Stators
,
Vibration
Clearance Effects on Spiral Vibrations due to Rubbing
IDETC-CIE 1997; V01BT07A018https://doi.org/10.1115/DETC97/VIB-4058
Topics:
Clearances (Engineering)
,
Vibration
,
Engineering simulation
,
Simulation
,
Stability
Instability — II
Prevention of Low-Frequency Vibration of High-Capacity Steam Turbine Units
IDETC-CIE 1997; V01BT07A019https://doi.org/10.1115/DETC97/VIB-4035
Topics:
Steam turbines
,
Vibration
,
Countermeasures
,
Excitation
,
High pressure (Physics)
,
Rotors
,
Turbines
,
Dampers
,
Damping
,
Flow (Dynamics)
Thermally Induced Synchronous Instability of a Radial Inflow Overhung Turbine: Part I
IDETC-CIE 1997; V01BT07A020https://doi.org/10.1115/DETC97/VIB-4063
Topics:
Inflow
,
Turbine components
,
Turbochargers
,
Wheels
,
Turbines
,
Rotors
,
Bearings
,
Dynamic analysis
,
Dynamics (Mechanics)
,
Rotordynamics
Thermally Induced Synchronous Instability of a Radial Inflow Overhung Turbine: Part II
IDETC-CIE 1997; V01BT07A021https://doi.org/10.1115/DETC97/VIB-4174
Topics:
Inflow
,
Turbine components
,
Turbochargers
,
Wheels
,
Turbines
,
Rotors
,
Bearings
,
Dynamic analysis
,
Dynamics (Mechanics)
,
Rotordynamics
Modeling — I
Wave Propagation Analysis of an Axially Strained, Rotating Timoshenko Shaft: Part I
IDETC-CIE 1997; V01BT07A022https://doi.org/10.1115/DETC97/VIB-4038
Topics:
Deformation
,
Reflection
,
Rotation
,
Rotational inertia
,
Shear deformation
,
Spectra (Spectroscopy)
,
Stress
,
Vibration
,
Wave propagation
,
Waves
Distributed Transfer Function Synthesis of Multi-Body Flexible Rotor Systems
IDETC-CIE 1997; V01BT07A023https://doi.org/10.1115/DETC97/VIB-4046
Topics:
Rotors
,
Transfer functions
,
Boundary-value problems
,
Modeling
Analysis of Fabricated Gear Wheels Using Cyclic Symmetry in a PC Environment
IDETC-CIE 1997; V01BT07A024https://doi.org/10.1115/DETC97/VIB-4051
Topics:
Eigenvalues
,
Gears
,
Wheels
Disks and Blades
Effect of Crack on the Natural Frequency of Rotating Twisted Blades
IDETC-CIE 1997; V01BT07A026https://doi.org/10.1115/DETC97/VIB-4050
Topics:
Blades
,
Fracture (Materials)
,
Rotation
Gyroscopic Effects of a Vibrationally Isolated Rotating Disk and Shaft
IDETC-CIE 1997; V01BT07A027https://doi.org/10.1115/DETC97/VIB-4062
Topics:
Acoustics
,
Aircraft engines
,
Design
,
Machinery
,
Noise (Sound)
,
Radiation (Physics)
,
Rotating disks
Modal Analysis of a Rotating Shaft-Disk-Blades System With a Cracked Blade
IDETC-CIE 1997; V01BT07A028https://doi.org/10.1115/DETC97/VIB-4064
Topics:
Blades
,
Disks
,
Modal analysis
,
Fracture (Materials)
,
Torsion
,
Bifurcation
,
Equations of motion
Coriolis Effect on Mode Localization in a Rotating Bladed Disk
IDETC-CIE 1997; V01BT07A029https://doi.org/10.1115/DETC97/VIB-4065
Topics:
Coriolis force
,
Disks
,
Blades
,
Cantilever beams
,
Centrifugal force
,
Galerkin method
,
Periodic structures
Modeling — II
Analysis of Ball Bearing Vibrations Caused by Outer Race Waviness
IDETC-CIE 1997; V01BT07A030https://doi.org/10.1115/DETC97/VIB-4033
Topics:
Ball bearings
,
Vibration
,
Bearings
,
Manufacturing
,
Machinery
,
Noise (Sound)
,
Numerical analysis
,
Vibrational spectra
Dynamics of a Rotating System With a Nonlinear Eddy-Current Damper
IDETC-CIE 1997; V01BT07A031https://doi.org/10.1115/DETC97/VIB-4054
Topics:
Dampers
,
Dynamics (Mechanics)
,
Eddies (Fluid dynamics)
Vibrations: Noises Produced by Rotors and Eddy Current Probes
IDETC-CIE 1997; V01BT07A032https://doi.org/10.1115/DETC97/VIB-4055
Topics:
Eddies (Fluid dynamics)
,
Eddy currents (Electricity)
,
Noise (Sound)
,
Probes
,
Rotors
,
Vibration
,
Machinery
,
Signals
,
Transducers
,
Uncertainty
Analysis and Synthesis of Dynamic Response of a Flexibly Coupled Rotor Assembly
IDETC-CIE 1997; V01BT07A033https://doi.org/10.1115/DETC97/VIB-4066
Topics:
Couplings
,
Dynamic response
,
Rotor assembly
,
Vibration
,
Machinery
,
Design
,
Differential equations
,
Equations of motion
,
Excitation
,
Passive control
Symposium on Active Vibration Control, Structural Control and Intelligent Structures
Modeling and Control in AVC
Modeling and Feedback Control of Flexible Plate With Focus on the Modes Highly Coupled to Radiation Field
IDETC-CIE 1997; V01BT08A001https://doi.org/10.1115/DETC97/VIB-3811
Topics:
Feedback
,
Modeling
,
Radiation (Physics)
,
Vibration
,
Design
,
Actuators
,
Control equipment
,
Discrete systems
,
Lumped parameter models
,
Modal analysis
Solving Vibration Control Problems Using Reduced Order Models for Flexible Structures: A Genetic Algorithm Approach
IDETC-CIE 1997; V01BT08A003https://doi.org/10.1115/DETC97/VIB-3817
Topics:
Flexible structures
,
Genetic algorithms
,
Vibration control
,
Design
,
Algorithms
,
Control equipment
,
Damping
,
Feedback
,
Modeling
,
Optimal control
Control Devices and Control Techniques
Regenerative Damper With an Optimally Tuned Resonant Circuit
IDETC-CIE 1997; V01BT08A005https://doi.org/10.1115/DETC97/VIB-3804
Topics:
Circuits
,
Dampers
,
Resonance
,
Damping
,
Actuators
,
Suspension systems
,
Vibration dampers
Centrifugal Delayed Resonator: Theory and Experiments
IDETC-CIE 1997; V01BT08A006https://doi.org/10.1115/DETC97/VIB-3829
Topics:
Absorption
,
Control algorithms
,
Delays
,
Dynamics (Mechanics)
,
Failure
,
Feedback
,
Mechanical properties
,
Mechanical structures
,
Oscillations
,
Pendulums
Control Devices and Application in AVC
Application of Dynamic Vibration Absorbers to Mass Measurement
IDETC-CIE 1997; V01BT08A007https://doi.org/10.1115/DETC97/VIB-3803
Topics:
Mass measurement
,
Vibration absorbers
,
Rotors
,
Vibration
,
Centrifugal force
,
Excitation
,
Measurement systems
,
Rotation
,
Space stations
High Performance Damping With a Semi-Active Spring
IDETC-CIE 1997; V01BT08A009https://doi.org/10.1115/DETC97/VIB-3826
Topics:
Damping
,
Springs
,
Actuators
,
Dampers
,
Engineering simulation
,
Feedback
,
Fluids
,
Hardware
,
Heat
,
Shock isolation
Vibration Isolation Control in AVC
Vibration Reduction and Isolation by On-Off Control of Friction Force at Spring Support
IDETC-CIE 1997; V01BT08A011https://doi.org/10.1115/DETC97/VIB-3802
Topics:
Friction
,
Springs
,
Vibration
,
Variable structure systems
,
Brakes
,
Computer simulation
,
Control theory
,
Displacement
,
Energy dissipation
,
Machinery
On an Improvement of Hybrid Vibration Isolation System
IDETC-CIE 1997; V01BT08A012https://doi.org/10.1115/DETC97/VIB-3805
Topics:
Vibration isolation
,
Vibration
,
Control systems
,
Dampers
,
Engineering simulation
,
Optimization
,
Random excitation
,
Simulation
,
Springs
Semi-Active Vibration Isolation Control Using Feedforward Information of Disturbance
IDETC-CIE 1997; V01BT08A013https://doi.org/10.1115/DETC97/VIB-3820
Topics:
Dampers
,
Feedforward control
,
Vibration isolation
Robotics, Manipulators and Piping Control in AVC
Actuator Selection for Vibration Control With Control Energy Constraints
IDETC-CIE 1997; V01BT08A015https://doi.org/10.1115/DETC97/VIB-3832
Topics:
Actuators
,
Vibration control
,
Design
,
Sensors
,
Algorithms
,
Control equipment
,
Engineering simulation
,
Flexible structures
,
Optimization
,
Simulation
Bridge Tower Control in AVC
Modeling and Active Vibration Control for Bridge Tower Structures Under Construction
IDETC-CIE 1997; V01BT08A017https://doi.org/10.1115/DETC97/VIB-3808
Topics:
Bridges (Structures)
,
Construction
,
Modeling
,
Vibration control
Structural Vibration Control for Bridge Towers and its Effect Under Wind Excitation Using a Wind Tunnel
IDETC-CIE 1997; V01BT08A018https://doi.org/10.1115/DETC97/VIB-3809
Topics:
Bridges (Structures)
,
Excitation
,
Vibration control
,
Wind
,
Wind tunnels
,
Control theory
,
Displacement
,
Electromagnetic actuators
,
Flexible structures
,
Lasers
Active Vibration Control of Bridge Tower Under Construction
Toshihiro Tamaki, Hiroaki Kagaya, Fujikazu Sakai, Kazushi Ogawa, Yoshikazu Nishi, Masatoshi Sasaki, Kazunori Yamaguchi
IDETC-CIE 1997; V01BT08A019https://doi.org/10.1115/DETC97/VIB-3822
Topics:
Bridges (Structures)
,
Construction
,
Robust control
,
Vibration control
Semi-Active Structural Control in AVC
Design of Shape Memory Alloy Damper for Base Isolated Structure
IDETC-CIE 1997; V01BT08A021https://doi.org/10.1115/DETC97/VIB-3824
Topics:
Dampers
,
Design
,
Shape memory alloys
,
Bearings
,
Rubber
,
Damping
,
Earthquakes
,
Excitation
,
Hazards
Vibration Control by Active Tuned Liquid Damper Using Magnetic Fluid
IDETC-CIE 1997; V01BT08A022https://doi.org/10.1115/DETC97/VIB-3825
Topics:
Dampers
,
Magnetic fluids
,
Sloshing
,
Vibration control
Full-Scale Applications of Structural Control in AVC
Development of an Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane
IDETC-CIE 1997; V01BT08A023https://doi.org/10.1115/DETC97/VIB-3816
Topics:
Crane barges
,
Dampers
,
Stress
,
Oscillations
,
Ocean waves
,
Seas
,
Theoretical analysis
,
Vessels
Development and Testing of Variable Gain Control Algorithms for Seismic Response Control of a Full-Scale Structure
IDETC-CIE 1997; V01BT08A024https://doi.org/10.1115/DETC97/VIB-3823
Topics:
Control algorithms
,
Testing
,
Earthquakes
,
Excitation
,
Dampers
,
Displacement
,
Emergency management
,
Steel
On the Efficacy of Magnetorheological Dampers for Seismic Response Reduction
IDETC-CIE 1997; V01BT08A025https://doi.org/10.1115/DETC97/VIB-3828
Topics:
Dampers
,
Earthquakes
,
Control systems
,
Excitation
Symposium on Mechatronics, Structronics, and Smart Structures
Smart Materials and Applications
Light-Induced Non-Contact Actuation and Control With Photostrictive Actuators
IDETC-CIE 1997; V01BT09A001https://doi.org/10.1115/DETC97/VIB-3930
Topics:
Actuators
,
Shells
,
Circular cylindrical shells
,
Constitutive equations
,
Couplings
,
Elasticity
,
Feedback
,
Lasers
,
Membranes
,
Modeling
Smart Structures and Structronic Systems
Shell Transformations and Distributed Sensing/Control Characteristics
IDETC-CIE 1997; V01BT09A004https://doi.org/10.1115/DETC97/VIB-3935
Vibration Control of a Multi-Layer Piezoelectric Cylindrical Shell
IDETC-CIE 1997; V01BT09A005https://doi.org/10.1115/DETC97/VIB-3936
Topics:
Pipes
,
Vibration control
,
Sensors
,
Actuators
,
Equations of motion
,
Feedback
,
Feedforward control
,
Simulation
,
Vibration
Actuator Placement in Smart Structures by Discrete-Continuous Optimization
IDETC-CIE 1997; V01BT09A006https://doi.org/10.1115/DETC97/VIB-3937
Topics:
Actuators
,
Optimization
,
Smart structures
,
Sensors
,
Bearings
,
Composite materials
,
Control systems
,
Damping
,
Design
,
Geometry
Control Effectiveness of Segmented Actuators Laminated on Ring-Shells
IDETC-CIE 1997; V01BT09A007https://doi.org/10.1115/DETC97/VIB-3938
Topics:
Actuators
,
Shells
,
Finite element analysis
,
Piezoelectric actuators
,
Shear (Mechanics)
On Experiments of Adaptive Control for Structure Vibration
IDETC-CIE 1997; V01BT09A008https://doi.org/10.1115/DETC97/VIB-3939
Topics:
Adaptive control
,
Vibration
,
Vibration control
,
Computers
,
Data acquisition
,
Random vibration
,
Actuators
,
Adaptive structures
,
Aeronautics
,
Computer control
Special Lecture: Sliding Mode Control of Mechatronic Systems
Gain-Scheduled Hyperplane Design for Sliding Mode Control via LMI
IDETC-CIE 1997; V01BT09A009https://doi.org/10.1115/DETC97/VIB-3940
Topics:
Design
,
Sliding mode control
,
Bearings
,
Dynamics (Mechanics)
,
Pumps
,
Robustness
,
Rotors
,
Stability
,
Turbochargers
,
Uncertainty
Optimal Tracking Servo-System by Means of Sliding Mode Control
IDETC-CIE 1997; V01BT09A010https://doi.org/10.1115/DETC97/VIB-3942
Topics:
Servomechanisms
,
Sliding mode control
,
Tracking control
,
Design methodology
,
Simulation
,
Trajectories (Physics)
,
Delays
,
Design
,
Robots
Sliding Mode Control of Motion and Vibration Without Sensors
IDETC-CIE 1997; V01BT09A011https://doi.org/10.1115/DETC97/VIB-3943
Topics:
Sensors
,
Sliding mode control
,
Vibration
,
Vibration control
,
Actuators
,
Computer simulation
,
Control systems
,
Motion control
,
Robots
,
Robust control
Control of Mechatronic Systems
Dynamic Vibration Absorber for a Ropeway Carrier
IDETC-CIE 1997; V01BT09A012https://doi.org/10.1115/DETC97/VIB-3944
Topics:
Bridges (Structures)
,
Damping
,
Oscillations
,
Pendulums
,
Ropes
,
Ships
,
Transportation systems
,
Vibration
,
Vibration absorbers
,
Weight (Mass)
Control System Design of Frequency-Feedback Magnetic Bearings
IDETC-CIE 1997; V01BT09A014https://doi.org/10.1115/DETC97/VIB-3947
Topics:
Control systems
,
Design
,
Feedback
,
Magnetic bearings
,
Circuits
,
Signals
,
Displacement
,
Electromagnets
,
Sensors
,
Signal processing
Realization of Controllers for DC and Vector Controlled Induction Motors
IDETC-CIE 1997; V01BT09A015https://doi.org/10.1115/DETC97/VIB-4170
Symposium on Finite Element Model Updating
Model Updating — I
Some Recent Advances in Model Updating
IDETC-CIE 1997; V01BT10A001https://doi.org/10.1115/DETC97/VIB-4142
Topics:
Construction
,
Errors
,
Excitation
,
Nonlinear equations
,
Signal processing
Generalized Reference Basis Model Updating in Structural Dynamics
IDETC-CIE 1997; V01BT10A002https://doi.org/10.1115/DETC97/VIB-4151
Topics:
Optimization
,
Structural dynamics
Direct Estimation of Nonlinear Joint Parameters
IDETC-CIE 1997; V01BT10A003https://doi.org/10.1115/DETC97/VIB-4157
The Application of Probability Theory to Model Updating
IDETC-CIE 1997; V01BT10A004https://doi.org/10.1115/DETC97/VIB-4168
Topics:
Aluminum
,
Cantilevers
,
Eigenvalues
,
Engineering simulation
,
Errors
,
Finite element model
,
Mode shapes
,
Probability
,
Simulation
,
Statistics
Model Updating — II
Simultaneous Stiffness and Mass Change Detection Based on Reduced Measurements
IDETC-CIE 1997; V01BT10A005https://doi.org/10.1115/DETC97/VIB-4143
Topics:
Stiffness
,
Damping
,
Frequency response
Damage Detection Based on Vibration Measurements and Inaccurate Models
IDETC-CIE 1997; V01BT10A006https://doi.org/10.1115/DETC97/VIB-4156
Topics:
Damage
,
Errors
,
Vibration measurement
Updating of Non-Conservative Systems Using Inverse Methods
IDETC-CIE 1997; V01BT10A007https://doi.org/10.1115/DETC97/VIB-4158
Finite Element Error Localization Using the Error Matrix Method
IDETC-CIE 1997; V01BT10A008https://doi.org/10.1115/DETC97/VIB-4169
Model Updating — III
On Updating of Finite Element Model Using Optimization Method
IDETC-CIE 1997; V01BT10A009https://doi.org/10.1115/DETC97/VIB-4149
Topics:
Finite element model
,
Optimization
,
Errors
,
Stress
,
Deflection
,
Mode shapes
,
Sensors
,
Stiffness
,
Testing
A Singular-Value Decomposition Method for Updating the Analytical Model
IDETC-CIE 1997; V01BT10A010https://doi.org/10.1115/DETC97/VIB-4152
Topics:
Algorithms
,
Approximation
,
Concrete forms
,
Errors
Evaluation of Different Strategies in the Parametric Identification of Dynamic Models
IDETC-CIE 1997; V01BT10A011https://doi.org/10.1115/DETC97/VIB-4154
Topics:
Dynamic models
,
Errors
,
Genetic algorithms
Updating Rotor-Bearing Finite Element Models
IDETC-CIE 1997; V01BT10A012https://doi.org/10.1115/DETC97/VIB-4155
Topics:
Bearings
,
Finite element model
,
Rotors
,
Algorithms
,
Damping
,
Errors
,
Frequency response
,
Genetic algorithms
,
Stiffness
Model Updating — IV
Reliable Mode Shape Expansion Method for Error Localisation and Model Updating
IDETC-CIE 1997; V01BT10A014https://doi.org/10.1115/DETC97/VIB-4145
Topics:
Errors
,
Mode shapes
,
Cantilever beams
,
Constitutive equations
,
Failure
,
Reliability
Combining Subset Selection and Parameter Constraints in Model Updating
IDETC-CIE 1997; V01BT10A015https://doi.org/10.1115/DETC97/VIB-4147
Topics:
Errors
Model Updating — V
Updating of Impact Models for Vibrating Cantilever Beams
IDETC-CIE 1997; V01BT10A019https://doi.org/10.1115/DETC97/VIB-4150
Email alerts
Most Read Proceedings Papers in IDETC-CIE
Case Study Method for Design Research: A Justification
IDETC-CIE2008