Efficient mixing at the microscale remains a formidable engineering challenge. Recent advancement and proliferation of Lab-on-a-Chip (LOC) and Micro Total Analysis Systems (μTAS) has demanded accelerated development and demonstration of novel micromixers as successful mixing is critical to device performance. Passive techniques such as chaotic advection and shear thinning as well as active methods utilizing electric fields show great promise at meeting these requirements. A new droplet-based mixing technique currently being developed aims at improving micromixer rates passively by increasing the Reynolds number in the microchannel. High speed gaseous flows with Reynolds numbers from 1 to 300 are used to detach and transport discrete droplets to a collision zone where droplet interaction and subsequent mixing is achieved under highly inertial conditions. The design utilizes variants of the standard T-junction arrangement for both the detachment and collision process. A fluorescing and non-fluorescing droplet pair are brought into contact in a collision zone and allowed to interact with relative velocities in the 0.1 to 5m/s range. Mixing rates are quantified using an optical based measurement technique that examines temporal changes in droplet intensity as mixing progresses. Both the detachment and collision processes are captured using a high speed camera capable of frame rates in excess of 10MHz. Experimental results are obtained for different collision zone geometry arrangements and microchannel aspect ratios to assess mixing performance. A description and sufficient explanation of the optical measurement techniques used to quantify mixing rates is provided, including limitations and shortcomings of this simplified approach. Analytical models are developed to gain better understanding of the key physical mechanisms driving droplet mixing and experimental results are correlated against this order of magnitude model. Based on these results, recommendations are made for potential design improvements and issues are addressed concerning mixing using two-phase gas/liquids flows.
Skip Nav Destination
ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting
August 1–5, 2010
Montreal, Quebec, Canada
Conference Sponsors:
- Fluids Engineering Division
ISBN:
978-0-7918-5450-1
PROCEEDINGS PAPER
Quantification of Inertial Droplet Collision Mixing Rates in Confined Microchannel Flows Using Differential Fluorescence Measurements
Brian Carroll,
Brian Carroll
The University of Texas at Austin, Austin, TX
Search for other works by this author on:
Carlos Hidrovo
Carlos Hidrovo
The University of Texas at Austin, Austin, TX
Search for other works by this author on:
Brian Carroll
The University of Texas at Austin, Austin, TX
Carlos Hidrovo
The University of Texas at Austin, Austin, TX
Paper No:
FEDSM-ICNMM2010-30667, pp. 1273-1283; 11 pages
Published Online:
March 1, 2011
Citation
Carroll, B, & Hidrovo, C. "Quantification of Inertial Droplet Collision Mixing Rates in Confined Microchannel Flows Using Differential Fluorescence Measurements." Proceedings of the ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting. ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels: Parts A and B. Montreal, Quebec, Canada. August 1–5, 2010. pp. 1273-1283. ASME. https://doi.org/10.1115/FEDSM-ICNMM2010-30667
Download citation file:
8
Views
Related Proceedings Papers
Related Articles
Modeling of Heat Transfer in Microchannel Gas Flow
J. Heat Transfer (February,2011)
Droplet Formation in a Microchannel T-Junction With Different Step Structure Position
J. Energy Resour. Technol (July,2021)
The UGKS Simulation of Microchannel Gas Flow and Heat Transfer Confined Between Isothermal and Nonisothermal Parallel Plates
J. Heat Transfer (December,2020)
Related Chapters
Towards Real-Time Optical Measurement of Microbubble Content in Hydrodynamic Test Facilities
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)