Skip Nav Destination
Proceedings Papers
In This Volume
ASME 2014 Gas Turbine India Conference
Compressors
Numerical Studies on the Effect of Gurney Flap on Aerodynamic Performance and Stall Margin of a Transonic Axial Compressor Rotor
GTINDIA 2014; V001T01A001https://doi.org/10.1115/GTINDIA2014-8130
Topics:
Compressors
,
Rotors
,
Blades
,
Pressure
,
Flow (Dynamics)
,
Computer software
,
Computational fluid dynamics
,
Deflection
,
Design
,
Engineering simulation
CFD-Modeling of Powerful Screw Centrifugal Kerosene Pump
GTINDIA 2014; V001T01A002https://doi.org/10.1115/GTINDIA2014-8145
Topics:
Computational fluid dynamics
,
Modeling
,
Pumps
,
Screws
,
Design
,
Errors
,
Fuel pumps
Analysis of Flow Through a Twisted Vaned Diffuser
GTINDIA 2014; V001T01A004https://doi.org/10.1115/GTINDIA2014-8163
Topics:
Diffusers
,
Flow (Dynamics)
,
Impellers
,
Compressors
,
Rotation
,
Computational fluid dynamics
,
Design
,
Pressure
,
Vaneless diffusers
Experimental Investigation of Unsteady Flow in a Transonic Uni-Stage Axial Compressor
S. Satish Kumar, Dilipkumar Bhanudasji Alone, Shobhavathy M. Thimmaiah, Janaki Rami Reddy Mudipalli, Ranjan Ganguli, S. B. Kandagal, Soumendu Jana
GTINDIA 2014; V001T01A005https://doi.org/10.1115/GTINDIA2014-8167
Topics:
Compressors
,
Unsteady flow
,
Flow (Dynamics)
,
Probes
,
Rotors
,
Annulus
,
Clearances (Engineering)
,
Blades
,
Boundary layers
,
Fast Fourier transforms
Numerical Investigation of Crosswind Effect on Different Rear Mounted Engine Installations
GTINDIA 2014; V001T01A006https://doi.org/10.1115/GTINDIA2014-8171
Topics:
Engines
,
Flow (Dynamics)
,
Wings
,
Wind
,
Aircraft
,
Computational fluid dynamics
,
Pressure
,
Regulations
,
Aerodynamics
,
Aircraft engines
Performance Enhancement of the Centrifugal Compressor Stage With a Rotating Vaneless Diffuser: A Numerical Study
GTINDIA 2014; V001T01A007https://doi.org/10.1115/GTINDIA2014-8179
Topics:
Compressors
,
Vaneless diffusers
,
Flow (Dynamics)
,
Impellers
,
Pressure
,
Design
,
Diffusers
,
Blades
,
Diffusion (Physics)
,
Disks
Nacelle: Air Intake Aerodynamic Design and Inlet Compatibility
GTINDIA 2014; V001T01A008https://doi.org/10.1115/GTINDIA2014-8182
Topics:
Design
,
Engines
,
Pressure
,
Electromagnetic induction
,
Flow (Dynamics)
,
Wings
,
Computational fluid dynamics
,
Computer simulation
,
Computer software
,
Flight
Techniques and Methods to Improve the Dynamic Strength of Gas Turbine Engines Compressor Rotor Wheels
GTINDIA 2014; V001T01A009https://doi.org/10.1115/GTINDIA2014-8203
Topics:
Compressors
,
Gas turbines
,
Rotors
,
Wheels
,
Blades
,
Stress
,
Resonance
,
Computational fluid dynamics
,
Computational methods
,
Flow (Dynamics)
Numerical Analysis to Investigate the Effect of Swept Rotor on the Overall Performance of a Transonic Compressor Stage
GTINDIA 2014; V001T01A010https://doi.org/10.1115/GTINDIA2014-8216
Topics:
Compressors
,
Numerical analysis
,
Rotors
,
Design
,
Stability
,
Flow (Dynamics)
,
Pressure
,
Axial flow
,
Computational fluid dynamics
,
Geometry
Study of Simulated Distortion Waves in an Axial Flow Fan
GTINDIA 2014; V001T01A011https://doi.org/10.1115/GTINDIA2014-8219
Topics:
Axial flow
,
Waves
,
Compressors
,
Flow (Dynamics)
,
Design
,
Blades
,
Flight
,
Inflow
,
Sustainability
,
Wire mesh
Prediction of Fatigue and Fracture Life of an Autofrettaged Turbine Compressor Disc Using Finite Element Analysis
Suman Mittemari Lakshminarayan Jagannath, Srikari Srinivasan, Mahesh Gopalakrishnan, Vinod Kumar Banthia
GTINDIA 2014; V001T01A012https://doi.org/10.1115/GTINDIA2014-8243
Topics:
Autofrettage
,
Compressors
,
Disks
,
Fatigue
,
Finite element analysis
,
Fracture (Materials)
,
Fracture (Process)
,
Turbines
,
Stress
,
Failure
Prediction and Comparison of Critical Speeds and Potential Excitation Using In-House Developed Software for an Integrally Geared Centrifugal Air Compressor
GTINDIA 2014; V001T01A013https://doi.org/10.1115/GTINDIA2014-8247
Topics:
Air compressors
,
Computer software
,
Excitation
,
Impellers
,
Shorelines
,
Bearings
,
Compressors
,
Design
,
Noise (Sound)
,
Steady state
Turbines
Studies on Transitional Heat Transfer Characteristics Over Turbine Vane Surface Using a High Order LES Approach
GTINDIA 2014; V001T02A001https://doi.org/10.1115/GTINDIA2014-8138
Topics:
Heat transfer
,
Turbines
,
Boundary layers
,
Turbulence
,
Gas turbines
,
Airfoils
,
Flow (Dynamics)
,
Pressure
,
Suction
,
High pressure (Physics)
Reduction in Secondary Losses in Turbine Cascade Using Contoured Boundary Layer Fence
GTINDIA 2014; V001T02A002https://doi.org/10.1115/GTINDIA2014-8175
Topics:
Boundary layers
,
Cascades (Fluid dynamics)
,
Turbines
,
Airfoils
,
Pressure
,
Pressure gradient
,
Suction
,
Vortices
,
Flow (Dynamics)
,
Kinetic energy
Studies on the Impact of Choice of Gas Models in an Un-Cooled Turbine Stage
GTINDIA 2014; V001T02A003https://doi.org/10.1115/GTINDIA2014-8212
Topics:
Turbines
,
Computational fluid dynamics
,
Steady state
,
Design
,
Fluids
,
Modeling
,
Simulation
,
Turbomachinery
Effect of Manufacturing Tolerances on the Turbine Blades
GTINDIA 2014; V001T02A004https://doi.org/10.1115/GTINDIA2014-8253
Topics:
Airfoils
,
Blades
,
Boundary-value problems
,
Computational fluid dynamics
,
Errors
,
Flow (Dynamics)
,
Geometry
,
Manufacturing
,
Nozzles
,
Simulation
Combustion, Fuels and Emissions
System Level Performance and Emissions Evaluation of Renewable Fuels for Jet Engines
GTINDIA 2014; V001T03A001https://doi.org/10.1115/GTINDIA2014-8107
Topics:
Emissions
,
Fuels
,
Jet engines
,
Engines
,
Aircraft
,
Biofuel
,
Nitrogen oxides
,
Trajectories (Physics)
,
Carbon dioxide
,
Combustion
Structure of the Velocity and Soot Concentration Fields of a Swirl Stabilized Turbulent Non-Premixed Flame in a Gas Turbine Model Combustor
GTINDIA 2014; V001T03A002https://doi.org/10.1115/GTINDIA2014-8114
Topics:
Combustion chambers
,
Flames
,
Gas turbines
,
Soot
,
Turbulence
,
Flow (Dynamics)
,
Combustion
,
Fuels
,
Lasers
,
Light emission
Plasma-Fuel Systems for Fuel Preparation, Ignition, Combustion and Gasification
GTINDIA 2014; V001T03A003https://doi.org/10.1115/GTINDIA2014-8124
Topics:
Combustion
,
Fuel gasification
,
Fuels
,
Ignition
,
Plasmas (Ionized gases)
,
Coal
,
Gases
,
Carbon black pigments
,
Catalysts
,
Chemical industry
Axial and Radial Variation of Spray Characteristics of a Small-Scale Simplex Atomizer
Muthuselvan Govindaraj, Muralidhara Halebidu Suryanarayana, Vinod Kumar Vyas, Jeyaseelan Rajendran, Rajeshwari Natarajan, Anurag Pradhan, Chaithra Perdoor, Prarthana Pattil, Mohammed Sameer
GTINDIA 2014; V001T03A004https://doi.org/10.1115/GTINDIA2014-8148
Topics:
Sprays
,
Surface mount devices
,
Drops
,
Pressure
,
Water
,
Aerodynamics
,
Aerospace industry
,
Combustion
,
Energy generation
,
Evaporation
Numerical Simulation of Inclined Injection of Polydisperse Polykinetic Spray in a Crossflow Using Quadrature Method of Moments
GTINDIA 2014; V001T03A005https://doi.org/10.1115/GTINDIA2014-8209
Topics:
Computer simulation
,
Method of moments
,
Sprays
,
Particulate matter
,
Combustion
,
Combustion chambers
,
Fuels
,
Gas turbines
,
Momentum
,
Ramjets
Modeling of Particle Wall Interaction and Film Transport Using Eulerian Wall Film Model
GTINDIA 2014; V001T03A006https://doi.org/10.1115/GTINDIA2014-8230
Topics:
Modeling
,
Particulate matter
,
Fuels
,
Gas turbines
,
Shear (Mechanics)
,
Sprays
,
Combustion
,
Nozzles
,
Accounting
,
Blades
Numerical Investigation of Soot Formation in Turbulent Diffusion Flames Using Moss-Brookes Model
GTINDIA 2014; V001T03A007https://doi.org/10.1115/GTINDIA2014-8233
Topics:
Flames
,
Soot
,
Turbulent diffusion
,
Oxidation
,
Turbulence
,
Absorption
,
Chemistry
,
Gases
,
Radiative heat transfer
,
Shapes
Numerical Investigation of Pilot-Stabilized Turbulent Flames Using Steady Flamelet Model
GTINDIA 2014; V001T03A008https://doi.org/10.1115/GTINDIA2014-8234
Topics:
Flames
,
Turbulence
,
Fuels
,
Carbon dioxide
,
Density
,
Engineering simulation
,
Kinetic energy
,
Probability
,
Reynolds-averaged Navier–Stokes equations
,
Simulation
Effect of Flow Pulsations in Premixed, Swirl Stabilized Combustor
GTINDIA 2014; V001T03A009https://doi.org/10.1115/GTINDIA2014-8246
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Gas turbines
,
Combustion
,
Computer simulation
,
Air flow
,
Fluid dynamics
,
Temperature
Effect of Flow Pulsation on Transport and Secondary Atomization of a Polydisperse Evaporating Spray
GTINDIA 2014; V001T03A010https://doi.org/10.1115/GTINDIA2014-8250
Topics:
Evaporation
,
Flow (Dynamics)
,
Sprays
,
Drops
,
Acoustics
,
Air flow
,
Combustion chambers
,
Modeling
,
Particulate matter
,
Surface mount devices
Experimental Investigation of a Hybrid Atomizer’s Spray Characteristics in Variable Flow Condition by Using Alcohol Blended Diesel Fuel
GTINDIA 2014; V001T03A011https://doi.org/10.1115/GTINDIA2014-8260
Topics:
Diesel
,
Ethanol
,
Flow (Dynamics)
,
Sprays
,
Fuels
,
Air flow
,
Combustion chambers
,
Gas turbines
,
Marine gas turbines
,
Turbulence
Investigation of Combustion Instability in a Swirl-Stabilized Combustor Using Symbolic Time Series Analysis
GTINDIA 2014; V001T03A012https://doi.org/10.1115/GTINDIA2014-8280
Topics:
Combustion
,
Combustion chambers
,
Time series
,
Fuels
,
Pressure
,
Air flow
,
Algebra
,
Filtration
,
Heat
,
Reynolds number
Investigation of Combustion Oscillations of Premixed Dump Combustor Using Time-Resolved Particle Image Velocimetry
GTINDIA 2014; V001T03A013https://doi.org/10.1115/GTINDIA2014-8288
Topics:
Combustion
,
Combustion chambers
,
Oscillations
,
Particulate matter
,
Vortices
,
Acoustics
,
Pressure
,
Flames
,
Fluctuations (Physics)
,
Excitation
Characterization of Mixing and Flow Properties From Numerical Simulation of Cold Flow in Non-Premixed Combustor
GTINDIA 2014; V001T03A014https://doi.org/10.1115/GTINDIA2014-8306
Topics:
Combustion chambers
,
Computer simulation
,
Flow (Dynamics)
,
Fuels
,
Vortices
,
Cross-flow
,
Dynamics (Mechanics)
,
Large eddy simulation
,
Wakes
Analysis of Different Radiation Models in a Swirl Stabilized Combustor
GTINDIA 2014; V001T03A015https://doi.org/10.1115/GTINDIA2014-8318
Topics:
Combustion chambers
,
Radiation (Physics)
,
Heat transfer
,
Modeling
,
Soot
,
Combustion
,
Computational fluid dynamics
,
Computer simulation
,
Evaporation
,
Fuels
Turbulence-Transport-Chemistry Interaction in Statistically Planar Premixed Flames and Ignition Kernels in Near Isotropic Turbulence
GTINDIA 2014; V001T03A016https://doi.org/10.1115/GTINDIA2014-8340
Topics:
Chemistry
,
Flames
,
Ignition
,
Turbulence
,
Particulate matter
,
Chemical kinetics
,
Displacement
,
Scalars
,
Accounting
,
Combustion chambers
Investigation of Flame Dynamics in a V - Flame Combustor During Combustion Instability
GTINDIA 2014; V001T03A017https://doi.org/10.1115/GTINDIA2014-8345
Topics:
Combustion
,
Combustion chambers
,
Dynamics (Mechanics)
,
Flames
,
Oscillations
,
Heat
,
Acoustics
,
Fluctuations (Physics)
,
Stability
,
Damage
Assessment of CFD Approaches for Next-Generation Combustor Design
GTINDIA 2014; V001T03A018https://doi.org/10.1115/GTINDIA2014-8361
Topics:
Combustion chambers
,
Computational fluid dynamics
,
Design
,
Computation
,
Engineering simulation
,
Modeling
,
Simulation
,
Temperature
,
Combustion
,
Ejectors
Heat Transfer
Inverse Heat Transfer Study of a Nonlinear Straight Porous Fin Using Hybrid Optimization
GTINDIA 2014; V001T04A001https://doi.org/10.1115/GTINDIA2014-8101
Topics:
Heat transfer
,
Optimization
,
Natural language processing
,
Nonlinear programming
,
Temperature distribution
,
Algorithms
,
Blades
,
Fins
,
Cooling
,
Errors
Numerical Study on Heat Transfer and Fluid Flow in Pin Fin-Dimple Channels With Fillet on Dimple Edge
GTINDIA 2014; V001T04A002https://doi.org/10.1115/GTINDIA2014-8103
Topics:
Fluid dynamics
,
Heat transfer
,
Blades
,
Cooling
,
Fins
,
Friction
,
Gas turbines
,
Heat flux
,
Pressure drop
,
Turbines
Gas Turbine Compartment Ventilation System
GTINDIA 2014; V001T04A003https://doi.org/10.1115/GTINDIA2014-8161
Topics:
Gas turbines
,
Ventilation
,
Computational fluid dynamics
,
Temperature
,
Turbines
,
Flow (Dynamics)
,
Heating
,
Pressure
,
Air conditioning
,
Databases
Influence of Labyrinth Seal Leakage on the Turbine Support Cooling
GTINDIA 2014; V001T04A004https://doi.org/10.1115/GTINDIA2014-8172
Topics:
Cooling
,
Leakage
,
Turbines
,
Heat
,
Engines
,
Temperature
,
Air flow
,
Aircraft engines
,
Aviation
,
Compressors
Heat Transfer and Flow Studies of Different Cooling Configurations for Gas Turbine Rotor Blade
GTINDIA 2014; V001T04A006https://doi.org/10.1115/GTINDIA2014-8214
Topics:
Blades
,
Cooling
,
Flow (Dynamics)
,
Gas turbines
,
Heat transfer
,
Rotors
,
Temperature
,
Pressure
,
Coolants
,
Film cooling
Computational Study of Flow and Heat Transfer in Matrix Cooling Channels
GTINDIA 2014; V001T04A007https://doi.org/10.1115/GTINDIA2014-8252
Topics:
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Pressure drop
,
Flow turning
,
Fluid dynamics
,
Friction
,
Reynolds number
,
Simulation
,
Vortices
Experimental Investigations on Heat Transfer Enhancement in a Horizontal Tube Using Converging and Diverging Conical Strips
Naga Sarada Somanchi, Sri Rama Devi Rangisetty, Sudheer PremKumar Bellam, Ravi Gugulothu, Samuel Bellam
GTINDIA 2014; V001T04A008https://doi.org/10.1115/GTINDIA2014-8287
Topics:
Heat transfer
,
Strips
,
Fluids
,
Friction
,
Geometry
,
Pressure drop
,
Reynolds number
,
Turbulence
Unsteady and Transitional Flows in Turbomachinery
Unsteady Flow Analysis Around an Elliptic-Bladed Savonius-Style Wind Turbine
GTINDIA 2014; V001T05A001https://doi.org/10.1115/GTINDIA2014-8141
Topics:
Savonius wind turbines
,
Unsteady flow
,
Wind turbines
,
Blades
,
Design
,
Turbines
,
Wind energy
,
Air flow
,
Engineering simulation
,
Flow (Dynamics)
Understanding the Steady and Transient Behavior of the Moderately Loaded High Speed Axial Flow Compressor Stage at Off-Design Conditions
Dilipkumar B. Alone, Subramani Satish Kumar, Shobhavathy M. Thimmaiah, Janaki Rami Reddy Mudipalli, A. M. Pradeep, Srinivasan Ramamurthy, Venkat S. Iyengar
GTINDIA 2014; V001T05A002https://doi.org/10.1115/GTINDIA2014-8144
Topics:
Axial flow
,
Design
,
Transients (Dynamics)
,
Compressors
,
Rotors
,
Pressure
,
Flow (Dynamics)
,
Probes
,
Aircraft engines
,
Engines
Prediction of Gas Turbine Oil Scoop Capture Efficiency
GTINDIA 2014; V001T05A004https://doi.org/10.1115/GTINDIA2014-8329
Topics:
Gas turbines
,
Blades
,
Computational fluid dynamics
,
Bearings
,
Industrial lubrication systems
,
Nozzles
,
Sprays
,
Blood
,
Cardiovascular system
,
Computer software
Structure and Dynamics
Yield Surface Investigation of Alloys During Model Disk Spin Tests
GTINDIA 2014; V001T06A001https://doi.org/10.1115/GTINDIA2014-8119
Topics:
Alloys
,
Disks
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
,
Hardening
,
Stress
,
Computer simulation
,
Displacement measurement
,
Eddies (Fluid dynamics)
Design Modification to Enhance Fatigue Life of an Aero-Engine Heat Shield
GTINDIA 2014; V001T06A002https://doi.org/10.1115/GTINDIA2014-8136
Topics:
Aircraft engines
,
Design
,
Fatigue life
,
Heat shielding
,
Engines
,
Fracture (Materials)
,
Vibration
,
Corrosion resistance
,
Exhaust systems
,
Failure
Simulation of Accessory Drives Bevel Gears Dynamic Conditions
GTINDIA 2014; V001T06A003https://doi.org/10.1115/GTINDIA2014-8139
Topics:
Bevel gears
,
Simulation
,
Gears
,
Stress
,
Errors
,
Oscillations
,
Spectra (Spectroscopy)
,
Stress concentration
,
Torque
,
Aviation
Novel Approach Towards Thrust Bearing Pad Cooling
GTINDIA 2014; V001T06A004https://doi.org/10.1115/GTINDIA2014-8165
Topics:
Cooling
,
Thrust bearings
,
Temperature
,
Circuits
,
Babbitt metal
,
Bearings
,
Cooling systems
,
Deformation
,
Failure
,
Film thickness
A Theoretical and Computational Analysis of the Bolted Joint: A Sensitivity Study of Temperature Effect on the Turbocharger Inlet Bolted Joint in Locomotive Engines
GTINDIA 2014; V001T06A005https://doi.org/10.1115/GTINDIA2014-8196
Topics:
Bolted joints
,
Engines
,
Locomotives
,
Temperature
,
Turbochargers
,
Stress
,
Design
,
Failure
,
Safety
,
Machine design
High Cycle Fatigue Life Assessment of Compressor Blades Under Multi-Axial Fatigue Mode
Sri Shanti Potluri, Ananda Mohan Bommakanti Srinivasa, Isai Thamizh Ramasamy, Srinivasa Rao Potu, Ananda Rao Patnaik Balivada Venkata
GTINDIA 2014; V001T06A006https://doi.org/10.1115/GTINDIA2014-8222
Topics:
Blades
,
Compressors
,
Fatigue
,
High cycle fatigue
,
Stress
,
Excitation
,
Stators
,
Engines
,
Resonance
,
Anisotropy
Residual Life Estimation of Axial Compressor Blade of a Turbo-Shaft Engine
GTINDIA 2014; V001T06A007https://doi.org/10.1115/GTINDIA2014-8241
Topics:
Blades
,
Compressors
,
Engines
,
Turbochargers
,
High cycle fatigue
,
Testing
,
Aircraft engines
,
Flight
,
Safety
,
Stress
Validation of LCF Life of Turbine Rotor Assembly of a Turbo-Shaft Engine Through Cyclic Spin Test
GTINDIA 2014; V001T06A008https://doi.org/10.1115/GTINDIA2014-8245
Topics:
Engines
,
Particle spin
,
Rotation
,
Rotor assembly
,
Spin (Aerodynamics)
,
Turbines
,
Turbochargers
,
Rotors
,
Stress
,
Low cycle fatigue
Three-Dimensional Finite Element Analysis of Bolted Joint With Helical Thread Connection
GTINDIA 2014; V001T06A009https://doi.org/10.1115/GTINDIA2014-8249
Topics:
Bolted joints
,
Finite element analysis
,
Thread
,
Stress
,
Pressure
,
Bolted flanges
,
Flanges
,
Geometry
,
Optimization
,
Stiffness
An Investigation in to the Rotordynamics Behavior of Mechanically Coupled Turbo Expander
GTINDIA 2014; V001T06A010https://doi.org/10.1115/GTINDIA2014-8256
Topics:
Rotordynamics
,
Turbochargers
,
Vibration
,
Bearings
,
Gears
,
Damping
,
Modeling
,
Stiffness
Bolted Joint Simulation Techniques in Gas Turbine Components
Kuberappa Jalammanavar, Lakshman Kasina, Raghavan Kotur Srinivasan, Prasanna Shivaramaiah, Ramakrishnayya Gupta Kuncham
GTINDIA 2014; V001T06A011https://doi.org/10.1115/GTINDIA2014-8262
Topics:
Bolted joints
,
Gas turbines
,
Simulation
,
Manufacturing
,
Design
,
Durability
,
Finite element model
,
Flanges
,
Friction
,
Machinery
A Balanced IIRS Model for Investigating the Dynamics of Damped Rotor Bearing System
GTINDIA 2014; V001T06A014https://doi.org/10.1115/GTINDIA2014-8279
Topics:
Bearings
,
Dynamics (Mechanics)
,
Rotors
,
Damping
Structural Assessment of Torque Converter at Operating Conditions: A Numerical Study
GTINDIA 2014; V001T06A015https://doi.org/10.1115/GTINDIA2014-8372
Topics:
Torque converters
,
Stress
,
Pumps
,
Turbines
,
Deformation
,
Blades
,
Fluid pressure
,
Transmission fluids
,
Engines
,
Failure
Controls, Diagnostics and Instrumentation
Development of a Damper Control System for Combined Cycle Thermal Gas Power Plant
GTINDIA 2014; V001T07A001https://doi.org/10.1115/GTINDIA2014-8118
Topics:
Combined cycles
,
Control systems
,
Dampers
,
Power stations
,
Solenoids
,
Energy dissipation
,
Gas turbines
,
Heat
,
Pulse width modulation
,
Valves
A New Real Time Path Planning for Mobile Robot Navigation Using Invasive Weed Optimization Algorithm
GTINDIA 2014; V001T07A002https://doi.org/10.1115/GTINDIA2014-8166
Topics:
Mobile robots
,
Navigation
,
Optimization algorithms
,
Path planning
,
Algorithms
,
Robots
,
Bacteria
,
Genetic algorithms
,
Optimization
,
Robustness
Experimental Investigation of Squeeze Film Damper Characteristics at High Speed Rotor Configurations
GTINDIA 2014; V001T07A003https://doi.org/10.1115/GTINDIA2014-8186
Topics:
Dampers
,
Rotors
,
Bearings
,
Vibration
,
Machinery
,
Turbochargers
,
Advanced materials
,
Damping
,
Dynamic stability
,
Dynamic testing (Materials)
Reynolds Number Effects on the Calibration of a Subminiature Four Hole Three Dimensional Wake Probe
GTINDIA 2014; V001T07A004https://doi.org/10.1115/GTINDIA2014-8215
Topics:
Calibration
,
Probes
,
Reynolds number
,
Wakes
,
Errors
,
Pressure
,
Yaw
,
Blades
,
Dimensions
,
Flow (Dynamics)
Neural Predictive Controller for Hydraulic Power Transmission in Wind Turbine
Akshan Paresh Mehta, Ganesh Ram Ramanujam Karthikeyan, Kalaichelvi Venkatesan, Karthikeyan Ramanujam
GTINDIA 2014; V001T07A005https://doi.org/10.1115/GTINDIA2014-8293
Topics:
Control equipment
,
Wind turbines
,
Fluids
,
Torque
,
Artificial neural networks
,
Blades
,
Circuits
,
Computer software
,
Design
,
Dynamic models
GT Cycle Innovations, Renewable Applications
Aerodynamic Performance Evaluation of a Novel Savonius-Style Wind Turbine Under an Oriented Jet
GTINDIA 2014; V001T08A001https://doi.org/10.1115/GTINDIA2014-8152
Topics:
Performance evaluation
,
Savonius wind turbines
,
Wind turbines
,
Turbines
,
Design
,
Stress
,
Wind tunnels
,
Wind velocity
,
Blades
,
Electric power generation
Effect of Guide Vane Angle on Wells Turbine Performance
GTINDIA 2014; V001T08A002https://doi.org/10.1115/GTINDIA2014-8183
Topics:
Guide vanes
,
Turbines
,
Wells
,
Flow (Dynamics)
,
Blades
,
Engineering simulation
,
Numerical analysis
,
Simulation
,
Turbulence
,
Vortices
Energy and Exergy Analysis of the Kalina Cycle Based Combined Cycle Using Solar Heating
GTINDIA 2014; V001T08A003https://doi.org/10.1115/GTINDIA2014-8192
Topics:
Combined cycles
,
Exergy analysis
,
Kalina cycle
,
Solar heating
,
Cycles
,
Steam
,
Flue gases
,
Heat recovery steam generators
,
Temperature
,
Brayton cycle
Designing Supercritical CO2 Power Plants Using an Integrated Design System
GTINDIA 2014; V001T08A004https://doi.org/10.1115/GTINDIA2014-8225
Topics:
Design
,
Power stations
,
Supercritical carbon dioxide
,
Cycles
,
Turbomachinery
,
Compressors
,
Turbines
,
Heat
,
Boundary-value problems
,
Engineering prototypes
A CCGT Based Polygeneration Using Rice Straw: Simulation by Aspen Plus®
GTINDIA 2014; V001T08A006https://doi.org/10.1115/GTINDIA2014-8257
Topics:
Biomass
,
Carbon dioxide
,
Climate
,
Combined cycle gas turbines
,
Compression
,
Cooling
,
Cycles
,
Emissions
,
Energy conversion
,
Energy generation
Multidisciplinary Design Approaches, Optimization and Uncertainty Quantification
Optimization of Compressor Blade Geometry for Efficiency and Pressure Ratio Under Strength Constraint
GTINDIA 2014; V001T11A001https://doi.org/10.1115/GTINDIA2014-8132
Topics:
Blades
,
Compressors
,
Geometry
,
Optimization
,
Pressure
,
Design
,
Simulation
,
Finite element model
,
Fluid structure interaction
,
Gas turbines
Performance Enhancement of an Electric Submersible Pump
GTINDIA 2014; V001T11A002https://doi.org/10.1115/GTINDIA2014-8133
Topics:
Pumps
,
Submersibles
,
Computational fluid dynamics
,
Blades
,
Centrifugal pumps
,
Diffusers
,
Groundwater
,
Impellers
,
Navier-Stokes equations
,
Numerical analysis
Design and Analysis of Crown Profile of Fan Rotor Blade Roots for Gas Turbines
GTINDIA 2014; V001T11A003https://doi.org/10.1115/GTINDIA2014-8180
Topics:
Blades
,
Design
,
Gas turbines
,
Rotors
,
Stress
,
Disks
,
Airfoils
,
Finite element methods
,
Optimization
Account the Mutual Influence of the Simulation Components of GTE
GTINDIA 2014; V001T11A004https://doi.org/10.1115/GTINDIA2014-8211
Topics:
Simulation
,
Combustion chambers
,
Compressors
,
Computational fluid dynamics
,
Gas turbines
,
Modeling
,
Steady state
,
Turbines
,
Workflow
Design Optimization of Wind Turbine Using Fluid Structural Interaction Analysis and Genetic Algorithm
Ganesh Ram Ramanujam Karthikeyan, Akshan Paresh Mehta, Karthikeyan Ramanujam, Kalaichelvi Venkatesan
GTINDIA 2014; V001T11A005https://doi.org/10.1115/GTINDIA2014-8296
Topics:
Design
,
Fluids
,
Genetic algorithms
,
Optimization
,
Wind turbines
,
Blades
,
Airfoils
,
Aerodynamics
,
Computational fluid dynamics
,
Computer software
Email alerts
Most Read Proceedings Papers in GTINDIA
GTINDIA2023 Front Matter
GTINDIA2023